Alloy Steel Pipe For Heat Exchangers - Overview of Petroleum Pipes Structure Pipes – Sanonpipe
Alloy Steel Pipe For Heat Exchangers - Overview of Petroleum Pipes Structure Pipes – Sanonpipe Detail:
SIZE: 19—914MM*2—150MM
|
Product category |
Steel grade |
Standard |
Application |
|
Seamless steel tubes for mechanical engineering and normalstructure |
10.20.35.45.Q345.Q460.Q490.Q620. |
GB/T8162 |
Seamless steel tubes for manufaclumg pipelines pipe fittings equipments and mechanlcal structures |
|
42CrMo.35CrMo.42CrMo. 40CrNiMoA.12cr1MoV |
|||
|
1018.1026.8620.4130.4140 |
ASTM A519 |
||
|
S235JRH. S273J0H. S275J2H. S355J0H. S355NLH.S355J2H |
EN10210 |
||
|
A53A.A53B.SA53A.SA53B |
ASTM A53/ASME SA53 |
Note:Other Size Can Also Be Provided After Consuliting With Customers
Chemical Component：
|
grade |
C |
Si |
Mn |
Mo |
Cr |
V |
|
12Cr1MoV |
0.08~0.15 |
0.17~0.37 |
0.40~0.70 |
0.25~0.35 |
0.90~1.20 |
0.15~0.30 |
Mechanical properties:：
|
grade |
Tensile（MPa） |
Yield（MPa） |
Extend（%） |
Section shrinkage （ψ/%） |
Impact （Aku2/J） |
Impact toughness value αkv(J/cm2) |
Hardness（HBS100/3000） |
|
12Cr1MoV |
≥490 |
≥245 |
≤22 |
≥50 |
≥71 |
≥88(9) |
≤179 |
Product detail pictures:
Related Product Guide:
The shopper satisfaction is our primary focus on. We uphold a consistent level of professionalism, quality, credibility and repair for Alloy Steel Pipe For Heat Exchangers - Overview of Petroleum Pipes Structure Pipes – Sanonpipe , The product will supply to all over the world, such as: Hanover , Tunisia , Poland , After years of development, we have formed strong ability in new product development and strict quality control system to ensure excellent quality and service. With the support of many long term cooperated customers, our products are welcomed all over the world.
By Caroline
from Burundi
- 2017.10.25 15:53
The factory has advanced equipment, experienced staffs and good management level, so product quality had assurance, this cooperation is very relaxed and happy!
By Coral
from Istanbul
- 2017.05.21 12:31
