China Cheapest Factory Alloy Steel Pipe Material - Seamless, welded and hot-dip galvanized pipe – Sanonpipe Manufacturer and Supplier

Cheapest Factory Alloy Steel Pipe Material - Seamless, welded and hot-dip galvanized pipe – Sanonpipe

Short Description:

Product Detail

Product Tags

Feedback (2)

Our group through specialist training. Skilled expert knowledge, sturdy sense of assistance, to fulfill the provider needs of shoppers for Gas And Oil Pipeline , Steel Pipe Industry , Erw Steel Pipe Company , Our products enjoy good popularity among our customers. We welcome customers, business associations and friends from all parts of the world to contact us and seek cooperation for mutual benefits.

Cheapest Factory Alloy Steel Pipe Material - Seamless, welded and hot-dip galvanized pipe – Sanonpipe Detail:

Overview

Application

It Is Mainly Used for force and pressure parts, and for general purpose steam, water, gas and air pipes.

Main Grade

GR.A, GR.B

Chemical Component

Grade	Component %，≤
Grade	C	Mn	P	S	Cu^A	Ni^A	Cr^A	Mo^A	V^A
S type（seamless pipe）
GR.A	0.25^B	0.95	0.05	0.045	0.40	0.40	0.40	0.15	0.08
GR.B	0.30^C	1.20	0.05	0.045	0.40	0.40	0.40	0.15	0.08
E type（Resistance welded pipe）
GR.A	0.25^B	0.95	0.05	0.045	0.40	0.40	0.40	0.15	0.08
GR.B	0.30^C	1.20	0.05	0.045	0.40	0.40	0.40	0.15	0.08
F type（Furnace Welded Pipe）
A	0.30^B	1.20	0.05	0.045	0.40	0.40	0.40	0.15	0.08

A The sum of these five elements must not be greater than 1.00%。

B For every 0.01% decrease in the maximum carbon content, the maximum manganese content is allowed to increase by 0.06%, but the maximum cannot exceed 1.35%.

C Each 0.01% decrease in the maximum carbon content will allow the maximum manganese content to increase by 0.06%, but the maximum must not exceed 1.65%.

Mechanical Property

item

GR.A

GR.B

tensile strength, ≥, psi [MPa]

Yield Strength, ≥, psi [MPa]

Gauge 2in.or 50mm elongation

48 000 [330]30 000 [205]A,B

60 000 [415]35 000 [240]A,B

A The minimum elongation of gauge length 2in. (50mm) shall be determined by the following formula：

e=625000(1940)A^0.2/U^0.9

e = the minimum elongation of the gauge 2in. (50mm), the percentage rounded to the nearest 0.5%;

A = Calculated according to the specified outer diameter of the nominal tube or the nominal width of the tensile sample and its specified wall thickness, and rounded to the nearest cross-sectional area of the tensile sample of 0.01 in.2 (1 mm2), and It is compared with 0.75in.2 (500mm2), whichever is smaller.

U = specified minimum tensile strength, psi (MPa).

B For various combinations of different sizes of tensile test specimens and prescribed minimum tensile strength, the required minimum elongation is shown in Table X4.1 or Table X4.2, according to its applicability.

Test Requirement

Tensile test, bending test, hydrostatic test, nondestructive electrical test of welds.

Supply Ability

Supply Ability: 2000 Tons Per Month Per Grade Of ASTM A53/A53M-2012 Steel Pipe

Packaging

In Bundles And In Strong Wooden Box

Delivery

7-14 days if in stock, 30-45 days to produce

Payment

30% depsoit, 70% L/C or B/L copy or 100% L/C at sight

Product Detail

Boiler Tube

GB/T 8162-2008

ASTM A519-2006

BS EN10210-1-2006

ASTM A53/A53M-2012

GB9948-2006

GB6479-2013

GB/T 17396-2009

Product detail pictures:

Related Product Guide:

We rely upon strategic thinking, constant modernisation in all segments, technological advances and of course upon our employees that directly participate inside our success for Cheapest Factory Alloy Steel Pipe Material - Seamless, welded and hot-dip galvanized pipe – Sanonpipe , The product will supply to all over the world, such as: Israel , Plymouth , Hamburg , Our company always concentrate on the development of the international market. We have a lot of customers in Russia , European countries, the USA, the Middle East countries and Africa countries. We always follow that quality is foundation while service is guarantee to meet all customers.

Alloy P5 Pipe