China Carbon Steel Astm A53 Grb/ Astm A106 Gr. B Seamless Pipe - Seamlless steel tubes for high-pressure chemical fertilizer processing equipments-GB6479-2013 – Sanonpipe
China Carbon Steel Astm A53 Grb/ Astm A106 Gr. B Seamless Pipe - Seamlless steel tubes for high-pressure chemical fertilizer processing equipments-GB6479-2013 – Sanonpipe Detail:
Overview
Application
Seamless steel pipe for high pressure fertilizer equipment is a high quality carbon structural steel and alloy steel seamless steel pipe suitable for chemical equipment and pipeline.
Main Grade
Grade of high-quality carbon structural steel: 10#、20#
Chemical Component
| Chemical Component/% | |||||||||||
| NO | C | Si | Mn | Cr | Mo | V | W | Nb | Ni | P S | |
| no more than | |||||||||||
| 10 | 0. 07-0. 13 | 0. 17 -0. 37 | 0.35 -0. 65 | - | - | - | - | - | - | 0.025 | 0.015 |
| 20 | 0. 17 -0. 23 | 0.17 -0. 37 | 0. 35-0.65 | - | - | - | - | - | - | 0.025 | 0.015 |
| Q345Ba | 0. 12 -0. 20 | 0.20-0. 50 | 1.20-1.70 | <0. 30 | <0. 10 | mis | - | <0.07 | W0. 50 | 0.025 | 0.015 |
| Q345C” | 0. 12 -0. 20 | 0.20 -0. 50 | 1.20 -1. 70 | W0. 30 | <0. 10 | <0. 15 | - | W0.07 | <0. 50 | 0.025 | 0.015 |
| Q345D” | 0. 12 -0. 18 | 0.20 -0. 50 | 1. 20~1.70 | W0. 30 | <0. 10 | <0. 15 | - | W0.07 | <0. 50 | 0. 025 | 0.015 |
| Q345Ea*b | 0. 12 -0. 18 | 0. 20-0. 50 | 1. 20 -1.70 | W0. 30 | <0. 10 | <0. 15 | - | <0.07 | <0. 50 | 0. 025 | 0.01 |
| 12CrMo | 0. 08-0. 15 | 0.17 -0. 37 | 0. 40-0. 70 | 0. 40-0. 70 | 0. 40-0. 55 | - | - | - | - | 0. 025 | 0.015 |
| 15CrMo | 0. 12 -0. 18 | 0. 17 -0. 37 | 0. 40-0. 70 | 0. 80-1. 10 | 0. 40-0.55 | - | - | - | - | 0. 025 | 0. 015 |
| 12Cr2Mo | 0. 08-0. 15 | <0. 50 | 0. 40-0.6 | 2.00-2. 50 | 0. 90-1. 13 | - | - | - | - | 0.025 | 0. 015 |
| 12Cr5Mo | <0. 15 | <0.50 | <0. 60 | 4. 00-6.00 | 0. 40-0. 60 | - | - | - | <0. 60 | 0. 025 | 0. 015 |
| lOMoWVNb | 0. 07-0. 13 | 0. 50-0.8 | 0. 50-0.8 | - | 0. 60-0. 90 | 0. 30-0. 50 | 0. 50-0. 90 | 0. 06-0. 12 | - | 0.025 | 0.015 |
| 12SiMoVNb | 0.08 -0. 14 | 0.50 -0.8 | 0. 60-0. 90 | - | 0. 90-1. 10 | 0. 30-0. 50 | - | 0. 04-0.08 | - | 0.025 | 0.015 |
| Awhen it is necessary to add fine grain elements, the steel shall contain at least one of Al, Nb, V and Ti. The added fine grain elements shall be indicated in the quality certificate. Ti content shall not be more than 0.20% | |||||||||||
| BAl content in steel shall not be less than 0.020%, or ala content in steel shall not be less than 0.015% | |||||||||||
Mechanical Property
| Grade | Mechanical Property | |||||||||
| Tensile | Yield | Elong after fracture A/% | Reduction of area | Shork absorption energy | ||||||
| MPa | MPa | Z/% | （KV2）/J | |||||||
| Steel tube wall thickness/mm | Test temperature/℃ | portrait | transver | |||||||
| W16 | >16 — 40 | >40 | portrait | transver | ||||||
| not less than | not less than | |||||||||
| 10 | 335〜490 | 205 | 195 | 185 | 24 | 22 | 一 | 一 | — | 一 |
| 20 | 410〜550 | 245 | 235 | 225 | 24 | 22 | 一 | 0 | 40 | 27 |
| Q345B | 490〜670 | 345 | 335 | 325 | 21 | 19 | 一 | 20 | 40 | 27 |
| Q345C | 490〜670 | 345 | 335 | 325 | 21 | 19 | 一 | 0 | 40 | 27 |
| Q345D | 490〜670 | 345 | 335 | 325 | 21 | 19 | 一 | -20 | 40 | 27 |
| Q345E | 490〜670 | 345 | 335 | 325 | 21 | 19 | — | -40 | 40 | 27 |
| 12CrMo | 410~560 | 205 | 195 | 185 | 21 | 19 | — | 20 | 40 | 27 |
| 15CrMo | 440〜640 | 295 | 285 | 275 | 21 | 19 | 一 | 20 | 40 | 27 |
| 12Cr2Moa | 450〜60。 | 280 | 20 | 18 | 一 | 20 | 40 | 27 | ||
| 12Cr5Mo | 390〜590 | 195 | 185 | 175 | 22 | 20 | 一 | 20 | 40 | 27 |
| lOMoWVNb | 470〜670 | 295 | 285 | 275 | 19 | 17 | 一 | 20 | 40 | 27 |
| 12SiMoVNb | 2470 | 315 | 305 | 295 | 19 | 17 | 50 | 20 | 40 | 27 |
| A 12Cr2Mo pipe，When D<30 mm and SW3 mm，the lower yield strength or specified plastic extension strength can be reduced by 10 MPa. | ||||||||||
Test Requirement
In addition to ensuring the chemical composition and mechanical properties, the steel pipe directly rolled by ingot shall be subject to low power inspection, and eddy current inspection or magnetic flux leakage inspection can be used instead of hydraulic test.
Supply Ability
2000 Tons Per Month Per Grade of Seamless steel tubes for high-pressure
chemical fertilizer processing equipments.
Packaging
In Bundles And In Strong Wooden Box
Delivery
7-14 days if in stock, 30-45 days to produce
Payment
30% depsoit, 70% L/C or B/L copy or 100% L/C at sight
Product Detail
mechanical/Chemical&Fertilizer Pipes
GB/T8162-2008
ASTM_A519-2006
BS EN 10210-1-2006
ASTM A53A53M-2012
GB9948-2006
GB6479-2013
GB/T 17396-2009
Product detail pictures:
Related Product Guide:
As for competitive prices, we believe that you will be searching far and wide for anything that can beat us. We can state with absolute certainty that for such quality at such prices we are the lowest around for China Carbon Steel Astm A53 Grb/ Astm A106 Gr. B Seamless Pipe - Seamlless steel tubes for high-pressure chemical fertilizer processing equipments-GB6479-2013 – Sanonpipe , The product will supply to all over the world, such as: Maldives , South Africa , Roman , Customer satisfaction is our first goal. Our mission is to pursue the superlative quality, making continual progress. We sincerely welcome you to make progress hand in hand with us, and construct a prosperous future together.
By Gabrielle
from moldova
- 2017.09.29 11:19
The company has rich resources, advanced machinery, experienced workers and excellent services, hope you keep improving and perfecting your products and service, wish you better!
By Jack
from Montreal
- 2018.09.29 17:23
Write your message here and send it to us
