China China New Product Sa213 T5 Alloy Pipe - Hot finished structural hollow sections of non-alloy and fine grain steels – Sanonpipe Manufacturer and Supplier

China New Product Sa213 T5 Alloy Pipe - Hot finished structural hollow sections of non-alloy and fine grain steels – Sanonpipe

Short Description:

Product Detail

Product Tags

Feedback (2)

We rely upon strategic thinking, constant modernisation in all segments, technological advances and of course upon our employees that directly participate inside our success for GR.C , Alloy Square Tube , Alloy Structure Pipe , Any interest, make sure you really feel free to get hold of us. We're searching forward to forming prosperous enterprise interactions with new purchasers across the earth within the near upcoming.

China New Product Sa213 T5 Alloy Pipe - Hot finished structural hollow sections of non-alloy and fine grain steels – Sanonpipe Detail:

Overview

Application

It Is Mainly Used for Mechanical structure，general structure.

Main Grade

S235GRH, S275JOH, S275J2H, S355JOH, S355J2H

Chemical Component

grade		Deoxygenated Type a	% Mass, maximum
Steel name	Steel nmber		C Prescribed wall thickness mm		Si	Mn	P	S	Nbc
Steel name	Steel nmber		≤ 40	＞ 40≤ 120	Si	Mn	P	S	Nbc
S235JRH	1.0039	FN	0.17	0.20	—	1.40	0.040	0.040	0.009
S275J0H	1.0149	FN	0.20	0.22	—	1.50	0.035	0.035	0.009
S275J2H	1.0138	FF	0.20	0.22	—	1.50	0.030	0.030	—
S355J0H	1.0547	FN	0.22	0.22	0.55	1.60	0.035	0.035	0.009
S355J2H	1.0576	FF	0.22	0.22	0.55	1.60	0.030	0.030	—
S355K2H	1.0512	FF	0.22	0.22	0.55	1.60	0.030	0.030	—
a The definition of deoxidation method is as follows: FN = Boiling steel is not allowed FF = fully-killed steel containing nitrogen-binding elements in an amount sufficient to bind possible nitrogen (E.g. 0.020% minimum total aluminum or 0.015% soluble aluminum) b It is allowed to exceed the specified value, as long as the N content increases by 0.001%, the maximum content of P decreases by 0.005% at the same time. The N content in the smelting analysis should not exceed 0.012%. c If the chemical composition shows a minimum total aluminum content of 0.020% and a minimum Al / N ratio of 2: 1, or if other sufficient nitrogen-binding elements are present, the above maximum nitrogen content limits do not apply. Nitrogen binding elements shall be noted in the inspection documents.

Mechanical Property

Grade

Minimum yield

tensile strength

Minimum elongation

Minimum impact power

Steel name

Steel number

Standard thickness

≤16

＞ 16

≤ 40

＞ 40

≤ 63

＞ 63

≤ 80

＞ 80

≤ 100

＞ 100

≤ 120

≤3

＞ 3

≤100

＞ 100

≤ 120

≤40

＞40≤63

＞63≤100

＞100≤120

-20℃

0℃

20℃

S235JRH

1.0039

235

225

215

195

360-510

360-500

S275J0Hc

1.0149

275

265

255

245

235

225

430-580

410-560

400-540

S275J2H

1.0138

S355J0Hc

1.0547

355

345

355

325

315

295

510-680

470-630

450-600

S355J2H

1.0576

S355K2H

1.0512

a Longitudinal sample value. The standard value of the transverse specimen is 2% lower than this value.b For thicknesses <3mm, see 9.2.2.c Only when option 1.3 is applied, confirmation of impact performance is required.d See 6.6.2 for the impact properties of small-sized specimens.e This value is equivalent to 27J at -30 ° C (see EN 1993-1-1).

Test Requirement

Hardness Test, Tension Tests, Nondestructive Tests, Steel Cleanliness, Hardenability, Flaring Test

Supply Ability

Supply Ability: 2000 Tons Per Month Per Grade Of BSEN10210-1-2006 Steel Pipe

Packaging

In Bundles And In Strong Wooden Box

Delivery

7-14 days if in stock, 30-45 days to produce

Payment

30% depsoit, 70% L/C or B/L copy or 100% L/C at sight

Product Detail

Seamless Steel Tubes For Mechanical Engineering And Normal Structure

GB/T8162-2008

ASTM A519-2006

BS EN 10210-1-2006

ASTM A53/A53M-2012

GB9948-2006

GB6479-2013

GB/T 17396-2009

Product detail pictures:

Related Product Guide:

"Sincerity, Innovation, Rigorousness, and Efficiency" is definitely the persistent conception of our corporation to the long-term to establish alongside one another with customers for mutual reciprocity and mutual profit for China New Product Sa213 T5 Alloy Pipe - Hot finished structural hollow sections of non-alloy and fine grain steels – Sanonpipe , The product will supply to all over the world, such as: belarus , Slovakia , Los Angeles , Each year, many of our customers would visit our company and achieve great business advancements working with us. We sincerely welcome you to visit us at any time and together we will prevail to a greater success in the hair industry.

Alloy Pipe Manufacturer