English
中文

China Precision Steel Seamless Tube Mechanical Pipe Heavy Wall Thickness Steel Pipe

China Precision Steel Seamless Tube Mechanical Pipe Heavy Wall Thickness Steel Pipe Featured Image
  • China Precision Steel Seamless Tube Mechanical Pipe Heavy Wall Thickness Steel Pipe
  • China Precision Steel Seamless Tube Mechanical Pipe Heavy Wall Thickness Steel Pipe
  • China Precision Steel Seamless Tube Mechanical Pipe Heavy Wall Thickness Steel Pipe

Short Description:

Seamless steel tubes, Carbon steel pipe and alloy mechanical tubes ,mainly for mechanical in ASTM A519-2006 Standard,alloy mechanical tubes mainly include

1018,1026,8620,4130,4140 etc.


  • Payment: 30% deposit, 70% L/C or B/L copy or 100% L/C at sight
  • Min.Order Quantity: 1 PC
  • Supply Ability: Annual 20000 Tons Inventory of Steel Pipe
  • Lead Time: 7-14 days if in stock, 30-45 days to produce
  • Packing: Black Vanishing, bevel and cap for every single pipe; OD below 219mm need to pack in bundle, and each bundle no exceed 2 tons.
    • Download as PDF

    Product Detail

    Product Tags

    Overview

    We retain bettering and perfecting our merchandise and service. At the same time, we do the job actively to do research and improvement for Mechanical Steel Pipe, With advantage of industry management, the business has always been committed to supporting prospects to become the current market leader in their respective industries. Devoting are always fundamental to our mission. We have always been in line with serving customers, creating value management objectives and adhering to the sincerity, dedication, persistent management idea.

    Application

    It Is Mainly Used for mechanical and used to make gas cylinders.include carbon and alloy steel seamless mechanical tubing,and covers both seamless hot-finished mechanical tubing and seamless cold-finished mechanical tubing in sizes up to and including 12 3⁄4 in. (323.8 mm) outside diameter for round tubes with wall thicknesses as required.

    Main Grade

    1018,1026,8620,4130,4140

    Chemical Component

    TABLE 1  Chemical Requirements of Low-Carbon Steels

    Grade Chemical Composition Limits, %
    Designation CarbonA ManganeseB Phosphorus,B Sulfur,B
    max max
    MT X 1015 0.10–0.20 0.60–0.90 0.04 0.05
    MT 1010 0.05–0.15 0.30–0.60 0.04 0.05
    MT 1015 0.10–0.20 0.30–0.60 0.04 0.05
    MT 1020 0.15–0.25 0.30–0.60 0.04 0.05
    MT X 1020 0.15–0.25 0.70–1.00 0.04 0.05

    B Limits apply to heat analysis; except as required by 6.1, product analyses are subject to the applicable additional tolerances given in Table 5.

    TABLE 2  Chemical Requirements of Other Carbon Steels

    Grade

    Chemical Composition Limits, %A

    Designation

    Carbon

    Manganese

    Phosphorus,

    Sulfur,

    max

    max

    1008

    0.10 max

    0.30–0.50

    0.040

    0.050

    1010

    0.08–0.13

    0.30–0.60

    0.040

    0.050

    1012

    0.10–0.15

    0.30–0.60

    0.040

    0.050

    1015

    0.13–0.18

    0.30–0.60

    0.040

    0.050

    1016

    0.13–0.18

    0.60–0.90

    0.040

    0.050

    1017

    0.15–0.20

    0.30–0.60

    0.040

    0.050

    1018

    0.15–0.20

    0.60–0.90

    0.040

    0.050

    1019

    0.15–0.20

    0.70–1.00

    0.040

    0.050

    1020

    0.18–0.23

    0.30–0.60

    0.040

    0.050

    1021

    0.18–0.23

    0.60–0.90

    0.040

    0.050

    1022

    0.18–0.23

    0.70–1.00

    0.040

    0.050

    1025

    0.22–0.28

    0.30–0.60

    0.040

    0.050

    1026

    0.22–0.28

    0.60–0.90

    0.040

    0.050

    1030

    0.28–0.34

    0.60–0.90

    0.040

    0.050

    1035

    0.32–0.38

    0.60–0.90

    0.040

    0.050

    1040

    0.37–0.44

    0.60–0.90

    0.040

    0.050

    1045

    0.43–0.50

    0.60–0.90

    0.040

    0.050

    1050

    0.48–0.55

    0.60–0.90

    0.040

    0.050

    1518

    0.15–0.21

    1.10–1.40

    0.040

    0.050

    1524

    0.19–0.25

    1.35–1.65

    0.040

    0.050

    1541

    0.36–0.44

    1.35–1.65

    0.040

    0.050

    A The ranges and limits given in this table apply to heat analysis; except as required by 6.1, product analyses are subject to the applicable additional toler-ances given in Table Number 5.

    TABLE 3  Chemical Requirements for Alloy Steels

    NOTE

    1—The ranges and limits in this table apply to steel not exceeding 200 in.2 (1290 cm2) in cross-sectional area.

    NOTE

    2—Small quantities of certain elements are present in alloy steels which are not specified or required. These elements are considered as incidental

    and may be present to the following maximum amounts: copper, 0.35 %; nickel, 0.25 %; chromium, 0.20 %; molybdenum, 0.10 %.

    NOTE

    3—The ranges and limits given in this table apply to heat analysis; except as required by 6.1, product analyses are subject to the applicable

    additional tolerances given in Table Number 5.

     

    GradeA,B Chemical Composition Limits, %
    Designa-
    Carbon Manganese Phospho- Sulfur,C,D Silicon Nickel Chromium Molybde-
    tion
    rus,Cmax max num
    1330 0.28–0.33 1.60–1.90 0.04 0.04 0.15–0.35 ... ... ...
    1335 0.33–0.38 1.60–1.90 0.04 0.04 0.15–0.35 ... ... ...
    1340 0.38–0.43 1.60–1.90 0.04 0.04 0.15–0.35 ... ... ...
    1345 0.43–0.48 1.60–1.90 0.04 0.04 0.15–0.35 ... ... ...
    3140 0.38–0.43 0.70–0.90 0.04 0.04 0.15–0.35 1.10–1.40 0.55–0.75 ...
    E3310 0.08–0.13 0.45–0.60 0.025 0.025 0.15–0.35 3.25–3.75 1.40–1.75 ...
    4012 0.09–0.14 0.75–1.00 0.04 0.04 0.15–0.35 ... ... 0.15–0.25
    4023 0.20–0.25 0.70–0.90 0.04 0.04 0.15–0.35 ... ... 0.20–0.30
    4024 0.20–0.25 0.70–0.90 0.04 0.035−0.050 0.15–0.35 ... ... 0.20–0.30
    4027 0.25–0.30 0.70–0.90 0.04 0.04 0.15–0.35 ... ... 0.20–0.30
    4028 0.25–0.30 0.70–0.90 0.04 0.035−0.050 0.15–0.35 ... ... 0.20–0.30
    4037 0.35–0.40 0.70–0.90 0.04 0.04 0.15–0.35 ... ... 0.20–0.30
    4042 0.40–0.45 0.70–0.90 0.04 0.04 0.15–0.35 ... ... 0.20–0.30
    4047 0.45–0.50 0.70–0.90 0.04 0.04 0.15–0.35 ... ... 0.20–0.30
    4063 0.60–0.67 0.75–1.00 0.04 0.04 0.15–0.35 ... ... 0.20–0.30
    4118 0.18–0.23 0.70–0.90 0.04 0.04 0.15–0.35 ... 0.40–0.60 0.08–0.15
    4130 0.28–0.33 0.40–0.60 0.04 0.04 0.15–0.35 ... 0.80–1.10 0.15–0.25
    4135 0.32–0.39 0.65–0.95 0.04 0.04 0.15–0.35 ... 0.80–1.10 0.15–0.25
    4137 0.35–0.40 0.70–0.90 0.04 0.04 0.15–0.35 ... 0.80–1.10 0.15–0.25
    4140 0.38–0.43 0.75–1.00 0.04 0.04 0.15–0.35 ... 0.80–1.10 0.15–0.25
    4142 0.40–0.45 0.75–1.00 0.04 0.04 0.15–0.35 ... 0.80–1.10 0.15–0.25
    4145 0.43–0.48 0.75–1.00 0.04 0.04 0.15–0.35 ... 0.80–1.10 0.15–0.25
    4147 0.45–0.50 0.75–1.00 0.04 0.04 0.15–0.35 ... 0.80–1.10 0.15–0.25
    4150 0.48–0.53 0.75–1.00 0.04 0.04 0.15–0.35 ... 0.80–1.10 0.15–0.25
    4320 0.17–0.22 0.45–0.65 0.04 0.04 0.15–0.35 1.65–2.00 0.40–0.60 0.20–0.30
    4337 0.35–0.40 0.60–0.80 0.04 0.04 0.15–0.35 1.65–2.00 0.70–0.90 0.20–0.30
    E4337 0.35–0.40 0.65–0.85 0.025 0.025 0.15–0.35 1.65–2.00 0.70–0.90 0.20–0.30
    4340 0.38–0.43 0.60–0.80 0.04 0.04 0.15–0.35 1.65–2.00 0.70–0.90 0.20–0.30
    E4340 0.38–0.43 0.65–0.85 0.025 0.025 0.15–0.35 1.65–2.00 0.70–0.90 0.20–0.30
    4422 0.20–0.25 0.70–0.90 0.04 0.04 0.15–0.35 ... ... 0.35–0.45
    4427 0.24–0.29 0.70–0.90 0.04 0.04 0.15–0.35 ... ... 0.35–0.45
    4520 0.18–0.23 0.45–0.65 0.04 0.04 0.15–0.35 ... ... 0.45–0.60
    4615 0.13–0.18 0.45–0.65 0.04 0.04 0.15–0.35 1.65–2.00 ... 0.20–0.30
    4617 0.15–0.20 0.45–0.65 0.04 0.04 0.15–0.35 1.65–2.00 ... 0.20–0.30
    4620 0.17–0.22 0.45–0.65 0.04 0.04 0.15–0.35 1.65–2.00 ... 0.20–0.30
    4621 0.18–0.23 0.70–0.90 0.04 0.04 0.15–0.35 1.65–2.00 ... 0.20–0.30
    4718 0.16–0.21 0.70–0.90 0.04 0.04 0.15–0.35 0.90–1.20 0.35–0.55 0.30–0.40
    4720 0.17–0.22 0.50–0.70 0.04 0.04 0.15–0.35 0.90–1.20 0.35–0.55 0.15–0.25
    4815 0.13–0.18 0.40–0.60 0.04 0.04 0.15–0.35 3.25–3.75 ... 0.20–0.30
    4817 0.15–0.20 0.40–0.60 0.04 0.04 0.15–0.35 3.25–3.75 ... 0.20–0.30
    4820 0.18–0.23 0.50–0.70 0.04 0.04 0.15–0.35 3.25–3.75 ... 0.20–0.30
    5015 0.12–0.17 0.30–0.50 0.04 0.04 0.15–0.35 ... 0.30–0.50 ...
    5046 0.43–0.50 0.75–1.00 0.04 0.04 0.15–0.35 ... 0.20–0.35 ...
    5115 0.13–0.18 0.70–0.90 0.04 0.04 0.15–0.35 ... 0.70–0.90 ...
    5120 0.17–0.22 0.70–0.90 0.04 0.04 0.15–0.35 ... 0.70–0.90 ...
    5130 0.28–0.33 0.70–0.90 0.04 0.04 0.15–0.35 ... 0.80–1.10 ...
    5132 0.30–0.35 0.60–0.80 0.04 0.04 0.15–0.35 ... 0.75–1.00 ...
    5135 0.33–0.38 0.60–0.80 0.04 0.04 0.15–0.35 ... 0.80–1.05 ...
    5140 0.38–0.43 0.70–0.90 0.04 0.04 0.15–0.35 ... 0.70–0.90 ...
    5145 0.43–0.48 0.70–0.90 0.04 0.04 0.15–0.35 ... 0.70–0.90 ...
    5147 0.46–0.51 0.70–0.95 0.04 0.04 0.15–0.35 ... 0.85–1.15 ...
    5150 0.48–0.53 0.70–0.90 0.04 0.04 0.15–0.35 ... 0.70–0.90 ...
    5155 0.51–0.59 0.70–0.90 0.04 0.04 0.15–0.35 ... 0.70–0.90 ...
    5160 0.56–0.64 0.75–1.00 0.04 0.04 0.15–0.35 ... 0.70–0.90 ...
    52100E 0.93–1.05 0.25–0.45 0.025 0.015 0.15–0.35 0.25 max 1.35–1.60 0.10 max
    E50100 0.98–1.10 0.25–0.45 0.025 0.025 0.15–0.35 ... 0.40–0.60 ...
    E51100 0.98–1.10 0.25–0.45 0.025 0.025 0.15–0.35 ... 0.90–1.15 ...
    E52100 0.98–1.10 0.25–0.45 0.025 0.025 0.15–0.35 ... 1.30–1.60 ...
    Vanadium
    6118 0.16–0.21 0.50–0.70 0.04 0.04 0.15–0.35 ... 0.50–0.70 0.10–0.15
    6120 0.17–0.22 0.70–0.90 0.04 0.04 0.15–0.35 ... 0.70–0.90 0.10 min
    6150 0.48–0.53 0.70–0.90 0.04 0.04 0.15–0.35 ... 0.80–1.10 0.15 min
    Aluminum Molybdenum
    E7140 0.38–0.43 0.50–0.70 0.025 0.025 0.15–0.40 0.95–1.30 1.40–1.80 0.30–0.40
    Nickel
    8115 0.13–0.18 0.70–0.90 0.04 0.04 0.15–0.35 0.20–0.40 0.30–0.50 0.08–0.15
    8615 0.13–0.18 0.70–0.90 0.04 0.04 0.15–0.35 0.40–0.70 0.40–0.60 0.15–0.25
    8617 0.15–0.20 0.70–0.90 0.04 0.04 0.15–0.35 0.40–0.70 0.40–0.60 0.15–0.25
    8620 0.18–0.23 0.70–0.90 0.04 0.04 0.15–0.35 0.40–0.70 0.40–0.60 0.15–0.25
    8622 0.20–0.25 0.70–0.90 0.04 0.04 0.15–0.35 0.40–0.70 0.40–0.60 0.15–0.25
    8625 0.23–0.28 0.70–0.90 0.04 0.04 0.15–0.35 0.40–0.70 0.40–0.60 0.15–0.25
    8627 0.25–0.30 0.70–0.90 0.04 0.04 0.15–0.35 0.40–0.70 0.40–0.60 0.15–0.25
    8630 0.28–0.33 0.70–0.90 0.04 0.04 0.15–0.35 0.40–0.70 0.40–0.60 0.15–0.25
    8637 0.35–0.40 0.75–1.00 0.04 0.04 0.15–0.35 0.40–0.70 0.40–0.60 0.15–0.25
    8640 0.38–0.43 0.75–1.00 0.04 0.04 0.15–0.35 0.40–0.70 0.40–0.60 0.15–0.25
    8642 0.40–0.45 0.75–1.00 0.04 0.04 0.15–0.35 0.40–0.70 0.40–0.60 0.15–0.25
    8645 0.43–0.48 0.75–1.00 0.04 0.04 0.15–0.35 0.40–0.70 0.40–0.60 0.15–0.25
    8650 0.48–0.53 0.75–1.00 0.04 0.04 0.15–0.35 0.40–0.70 0.40–0.60 0.15–0.25
    8655 0.51–0.59 0.75–1.00 0.04 0.04 0.15–0.35 0.40–0.70 0.40–0.60 0.15–0.25
    8660 0.55–0.65 0.75–1.00 0.04 0.04 0.15–0.35 0.40–0.70 0.40–0.60 0.15–0.25
    8720 0.18–0.23 0.70–0.90 0.04 0.04 0.15–0.35 0.40–0.70 0.40–0.60 0.20–0.30
    8735 0.33–0.38 0.75–1.00 0.04 0.04 0.15–0.35 0.40–0.70 0.40–0.60 0.20–0.30
    8740 0.38–0.43 0.75–1.00 0.04 0.04 0.15–0.35 0.40–0.70 0.40–0.60 0.20–0.30
    8742 0.40–0.45 0.75–1.00 0.04 0.04 0.15–0.35 0.40–0.70 0.40–0.60 0.20–0.30
    8822 0.20–0.25 0.75–1.00 0.04 0.04 0.15–0.35 0.40–0.70 0.40–0.60 0.30–0.40
    9255 0.51–0.59 0.60–0.80 0.04 0.04 1.80–2.20 ... 0.60–0.80 ...
    9260 0.56–0.64 0.75–1.00 0.04 0.04 1.80–2.20 ... ... ...
    9262 0.55–0.65 0.75–1.00 0.04 0.04 1.80–2.20 ... 0.25–0.40 ...
    E9310 0.08–0.13 0.45–0.65 0.025 0.025 0.15–0.35 3.00–3.50 1.00–1.40 0.08–0.15
    9840 0.38–0.42 0.70–0.90 0.04 0.04 0.15–0.35 0.85–1.15 0.70–0.90 0.20–0.30
    9850 0.48–0.53 0.70–0.90 0.04 0.04 0.15–0.35 0.85–1.15 0.70–0.90 0.20–0.30
    50B40 0.38–0.42 0.75–1.00 0.04 0.04 0.15–0.35 ... 0.40–0.60 ...
    50B44 0.43–0.48 0.75–1.00 0.04 0.04 0.15–0.35 ... 0.40–0.60 ...
    50B46 0.43–0.50 0.75–1.00 0.04 0.04 0.15–0.35 ... 0.20–0.35 ...
    50B50 0.48–0.53 0.74–1.00 0.04 0.04 0.15–0.35 ... 0.40–0.60 ...
    50B60 0.55–0.65 0.75–1.00 0.04 0.04 0.15–0.35 ... 0.40–0.60 ...
    51B60 0.56–0.64 0.75–1.00 0.04 0.04 0.15–0.35 ... 0.70–0.90 ...
    81B45 0.43–0.48 0.75–1.00 0.04 0.04 0.15–0.35 0.20–0.40 0.35–0.55 0.08–0.15
    86B45 0.43–0.48 0.75–1.00 0.04 0.04 0.15–0.35 0.40–0.70 0.40–0.60 0.15–0.25
    94B15 0.13–0.18 0.75–1.00 0.04 0.04 0.15–0.35 0.30–0.60 0.30–0.50 0.08–0.15
    94B17 0.15–0.20 0.75–1.00 0.04 0.04 0.15–0.35 0.30–0.60 0.30–0.50 0.08–0.15
    94B30 0.28–0.33 0.75–1.00 0.04 0.04 0.15–0.35 0.30–0.60 0.30–0.50 0.08–0.15
    94B40 0.38–0.43 0.75–1.00 0.04 0.04 0.15–0.35 0.30–0.60 0.30–0.50 0.08–0.15

    B Grades shown in this table with the letter B, such as 50B40, can be expected to have 0.0005 % minimum boron control. A  Grades shown in this table with prefix letter E generally are manufactured by the basic-electric-furnace process. All others are normally manufactured by the basic-open-hearth process but may be manufactured by the basic-electric-furnace process with adjustments in phosphorus and sulfur.

     

    C  The phosphorus sulfur limitations for each process are as follows:

    Basic electric furnace         0.025 max %         Acid electric furnace          0.050 max %

    Basic open hearth            0.040 max %          Acid open hearth             0.050 max %

    D Minimum and maximum sulfur content indicates resulfurized steels.

    EThe purchaser may specify the following maximum amounts: copper, 0.30 %; aluminum, 0.050 %; and oxygen, 0.0015 %.

     

    Mechanical Property

    Typical Tensile Properties, Hardness and Thermal Condition for some of the More Common Grades of Carbon and Alloy Steels

     

     

    CW—Cold Worked SR—Stress Relieved A—Annealed N—NormalizedA       The following are the symbol definitions for the various conditions: HR—Hot Rolle

    Grade Condi- Ultimate Yield Elongation Rockwell,
    Desig- tionA Strength, Strength, in 2 in. or Hardness
    nation 50 mm, % B Scale
    ksi MPa ksi MPa
    1020 HR 50 345 32 221 25 55
    CW 70 483 60 414 5 75
    SR 65 448 50 345 10 72
    A 48 331 28 193 30 50
    N 55 379 34 234 22 60
    1025 HR 55 379 35 241 25 60
    CW 75 517 65 448 5 80
    SR 70 483 55 379 8 75
    A 53 365 30 207 25 57
    N 55 379 36 248 22 60
    1035 HR 65 448 40 276 20 72
    CW 85 586 75 517 5 88
    SR 75 517 65 448 8 80
    A 60 414 33 228 25 67
    N 65 448 40 276 20 72
    1045 HR 75 517 45 310 15 80
    CW 90 621 80 552 5 90
    SR 80 552 70 483 8 85
    A 65 448 35 241 20 72
    N 75 517 48 331 15 80
    1050 HR 80 552 50 345 10 85
    SR 82 565 70 483 6 86
    A 68 469 38 262 18 74
    N 78 538 50 345 12 82
    1118 HR 50 345 35 241 25 55
    CW 75 517 60 414 5 80
    SR 70 483 55 379 8 75
    A 50 345 30 207 25 55
    N 55 379 35 241 20 60
    1137 HR 70 483 40 276 20 75
    CW 80 552 65 448 5 85
    SR 75 517 60 414 8 80
    A 65 448 35 241 22 72
    N 70 483 43 296 15 75
    4130 HR 90 621 70 483 20 89
    SR 105 724 85 586 10 95
    A 75 517 55 379 30 81
    N 90 621 60 414 20 89
    4140 HR 120 855 90 621 15 100
    SR 120 855 100 689 10 100
    A 80 552 60 414 25 85
    N 120 855 90 621 20 100

    d

    Tolerance

    Outside Diameter Tolerances for Round Hot-Finished TubingA,B,C

     

    Outside Diameter Size Range, Outside Diameter Tolerance, in. (mm)
    in. (mm)

    Over

    Under
    Up to 2.999 (76.17)

    0.020 (0.51)

    0.020 (0.51)
    3.000–4.499 (76.20–114.27)

    0.025 (0.64)

    0.025 (0.64)
    4.500–5.999 (114.30–152.37)

    0.031 (0.79)

    0.031 (0.79)
    6.000–7.499 (152.40–190.47)

    0.037 (0.94)

    0.037 (0.94)
    7.500–8.999 (190.50–228.57)

    0.045 (1.14)

    0.045 (1.14)
    9.000–10.750 (228.60–273.05)

    0.050 (1.27)

    0.050 (1.27)

     

    A Diameter tolerances are not applicable to normalized and tempered or quenched and tempered conditions.

    B The common range of sizes of hot finished tubes is 11⁄2 in. (38.1 mm) to 103⁄4 in. (273.0 mm) outside diameter with wall thickness at least 3 % or more of outside diameter, but not less than 0.095 in. (2.41 mm).

    C Larger sizes are available; consult manufacturer for sizes and tolerances.

     

    Wall Thickness Tolerances for Round Hot-Finished

    Tubing

     

     

    Wall Thickness

    Wall Thickness Tolerance,A percent Over
    Range as Percent

    and Under Nominal
    of Outside

    Outside

    Outside

    Outside
    Diameter

    Diameter

    Diameter

    Diameter

    2.999 in.

    3.000 in.

    6.000 in.

    (76.19 mm)

    (76.20 mm)

    (152.40 mm)

    and smaller

    to 5.999 in.

    to 10.750 in.

    (152.37 mm)

    (273.05 mm)
    Under 15

    12.5

    10.0

    10.0
    15 and over

    10.0

    7.5

    10.0

    A Wall thickness tolerances may not be applicable to walls 0.199 in. (5.05 mm) and less; consult manufacturer for wall tolerances on such tube sizes.
    a more important dimension, then cold-worked tubing should be specified to inside diameter and wall thickness or outside diameter and inside diameter.
    Rough-Turned Mechanical Tubing—Variation in outside diameter and wall thickness shall not exceed the tolerance in Table. Table  covers tolerances as applied to outside diameter and wall thickness and applies to the specified size.
    Ground Mechanical Tubing—Variation in outside diam-eter shall not exceed the tolerances in Table. This product is normally produced from a cold-worked tube.
    Lengths—Mechanical tubing is commonly furnished in mill lengths, 5 ft (1.5 m) and over. Definite cut lengths are furnished when specified by the purchaser. Length tolerances are shown in Table .
    Straightness—The straightness tolerances for seamless round tubing shall not exceed the amounts shown in Table.

     

    Test Requirement

    1.Hardness Test
    When hardness limits are required, the manufacturer shall be consulted. Typical hardnesses are listed in Table .When specified, the hardness test shall be performed on 1 % of the tubes.

    2.Tension Tests
    When tensile properties are required, the manufacturer shall be consulted. Typical tensile properties for some of the more common grades and thermal conditions are listed in table.

    3.Nondestructive Tests
    Various types of nondestructive ultrasonic or electromagnetic tests are available. The test to be used and the inspection limits shall be established by manufacturer and purchaser agreement.

    4.Flaring Test
    When there are special requirements for steel cleanliness, the methods of test and limits of acceptance shall be established by manufacturer and purchaser agreement.

    Product Detail

    Mechanical/Chemical&Fertilizer Pipes


    GB/T8162-2008


    ASTM A519-2006


    BS EN 10210-1-2006


    ASTM A53/A53M-2012


    GB9948-2006


    GB6479-2013


    GB/T 17396-2009

  • Previous:
  • Next:
    • Write your message here and send it to us
    Hit enter to search or ESC to close