Factory wholesale A106 Grb Sch80 Seamless Pipe - GB/T5310-2017 Seamless tube for high pressure boiler – Sanonpipe

Short Description:


Product Detail

Product Tags

Related Video

Feedback (2)

Dependable high-quality and fantastic credit standing are our principles, which will help us at a top-ranking position. Adhering to your tenet of "quality very first, client supreme" for Oil Pipe , Alloy Pipe Supplier , Steel Pipe Astm , Currently, we are looking forward to even greater cooperation with overseas customers based on mutual benefits. Please feel free to contact us for more details.
Factory wholesale A106 Grb Sch80 Seamless Pipe - GB/T5310-2017 Seamless tube for high pressure boiler – Sanonpipe Detail:

Application

It is mainly used to make high-quality carbon structural steel, alloy structural steel and stainless heat-resistant steel seamless steel pipes for high pressure and above steam boiler pipes.

Mainly used for high pressure and high temperature service of boiler(Superheater tube, reheater tube, air guide tube, main steam tube for high and ultra high pressure boilers). Under the action of high temperature flue gas and water vapor, the tube will oxidize and corrode. It is required that the steel pipe has high durability, high resistance to oxidation and corrosion, and good structural stability.

Main Grade

Grade of high-quality carbon structural steel: 20g、20mng、25mng

Grade of alloy structural steel: 15mog、20mog、12crmog、15crmog、12cr2mog、12crmovg、12cr3movsitib, etc

Grade of rust-resistant heat-resistant steel: 1cr18ni9     1cr18ni11nb

Tolerance

Wall Thickness and Outter Diameter:

If there is no special requirements, pipe gonna be delivery as  norminal outter diameter and norminal wall thickness. As follow sheet

Classification designation

Method of manufacture

Size of pipe

Tolerance

Normal grade

High grade

W H

Hot Rolled(extrude) pipe

Norminal outter Diameter

(D)

<57

士 0.40

±0,30

57 〜325

SW35

±0.75%D

±0.5%D

S>35

±1%D

±0.75%D

>325 〜6。。

+ 1%D or + 5.Take lesser one一2

>600

+ 1%D or + 7,Take lesser one一2

Norminal Wall Thickness

(S)

<4.0

±|・丨)

±0.35

>4.0-20

+ 12.5%S

±10%S

>20

DV219

±10%S

±7.5%S

心219

+ 12.5%S -10%S

10%S

W-H

Thermal expansion pipe

Norminal outter Diameter

(D)

all

±1%D

±0.75%。

Norminal Wall Thickness

(S)

all

+ 20%S

-10%S

+ 15%S

-io%s

W-C

Cold drawn(rolled)

Ppipe

Norminal outter Diameter

(D)

<25.4

±’L1j

>25.4 〜4()

±0.20

>40 〜50

|:0.25

>50 〜60

±0.30

>60

±0.5%D

Norminal Wall Thickness

(S)

<3.0

±0.3

±0.2

>3.0

S

±7.5%S

Length:

The usual length of steel pipes is 4 000 mm ~ 12 000 mm. After consultation between the supplier and the buyer, and fill in the contract, it can be delivered steel pipes with a length greater than 12 000 mm or shorter than I 000 mm but not shorter than 3 000 mm; short length The number of steel pipes less than 4,000 mm but not less than 3,000 mm shall not exceed 5% of the total number of steel pipes delivered

Delivery weight:
When the steel pipe is delivered according to the nominal outer diameter and nominal wall thickness or the nominal inner diameter and nominal wall thickness, the steel pipe is delivered according to the actual weight. It can also be delivered according to the theoretical weight.
When the steel pipe is delivered according to the nominal outer diameter and minimum wall thickness, the steel pipe is delivered according to the actual weight; the supply and demand parties negotiate. And it is indicated in the contract. The steel pipe can also be delivered according to the theoretical weight.

Weight tolerance:
According to the requirements of the purchaser, after consultation between the supplier and the purchaser, and in the contract, the deviation between the actual weight and the theoretical weight of the delivery steel pipe shall meet the following requirements:
a) Single steel pipe: ± 10%;
b) Each batch of steel pipes with a minimum size of 10 t: ± 7.5%.

Test Requirement

Hydraustatic Test:

The steel pipe should be tested hydraulically one by one. The maximum test pressure is 20 MPa. Under the test pressure, the stabilization time should be not less than 10 s, and the steel pipe should not leak.

After the user agrees, the hydraulic test can be replaced by eddy current testing or magnetic flux leakage testing.

Nondestructive Test:

Pipes that require more inspection should be ultrasonically inspected one by one. After the negotiation requires the consent of the party and is specified in the contract, other non-destructive testing can be added.

Flattening Test:

Tubes with an outer diameter greater than 22 mm shall be subjected to a flattening test. No visible delamination, white spots, or impurities should occur during the entire experiment.

Flaring Test:

 According to the requirements of the purchaser and stated in the contract, the steel pipe with outer diameter ≤76mm and wall thickness ≤8mm can be done flaring test . The experiment was performed at room temperature with a taper of 60 °. After the flaring, the flaring rate of the outer diameter should meet the requirements of the following table, and the test material must not show cracks or rips

Steel Type

 

 

Outter diameter flaring rate of steel pipe/%

Inner Diameter/Outter Diameter

<0.6

>0.6 〜0.8

>0.8

High-quality carbon structural steel

10

12

17

Structural alloy steel

8

10

15

•The inner diameter is calculated for the sample.

Seamless Steel Tubes For High-Pressure Boilers


1


GB/T5310-2017


A106 Boiler Pipe


ASME SA-106/SA-106M-2015


carbon steel pipe


ASTMA210(A210M)-2012


2


ASME SA-213/SA-213M


boiler pipe IBR


ASTM A335/A335M-2018


Product detail pictures:

Factory wholesale A106 Grb Sch80 Seamless Pipe -
 GB/T5310-2017 Seamless tube for high pressure boiler – Sanonpipe detail pictures

Factory wholesale A106 Grb Sch80 Seamless Pipe -
 GB/T5310-2017 Seamless tube for high pressure boiler – Sanonpipe detail pictures

Factory wholesale A106 Grb Sch80 Seamless Pipe -
 GB/T5310-2017 Seamless tube for high pressure boiler – Sanonpipe detail pictures


Related Product Guide:

We are experienced manufacturer. Wining the majority from the crucial certifications of its market for Factory wholesale A106 Grb Sch80 Seamless Pipe - GB/T5310-2017 Seamless tube for high pressure boiler – Sanonpipe , The product will supply to all over the world, such as: Luxembourg , Chicago , Ecuador , We focus on providing service for our clients as a key element in strengthening our long-term relationships. Our continual availability of high grade products in combination with our excellent pre-sale and after-sales service ensures strong competitiveness in an increasingly globalized market. We are willing to cooperate with business friends from at home and abroad and create a great future together.
  • Production management mechanism is completed, quality is guaranteed, high credibility and service let the cooperation is easy, perfect!
    5 Stars By Mark from Portland - 2017.09.09 10:18
    Perfect services, quality products and competitive prices, we have work many times, every time is delighted, wish continue to maintain!
    5 Stars By Ray from Florence - 2018.12.28 15:18
    Write your message here and send it to us