Featured Products
-
OEM Manufacturer Strength Long Service Life Seamless Boiler Steel Tube Pipe
Seamless steel pipe for high temperature operation ASTM A106, suitable for high temperature
-
Quality Inspection for Api 5l X52 Seamless Line Pipe
Seamless pipeline used for high quality transport the oil, steam and water drawn from the ground to the oil and gas industry enterprises through the pipeline
-
Factory supplied Api Lsaw Pipe Carbon Steel Pipe/tube Petroleum Gas Oil Seamless Tube
Seamless steel tubes for petroleum cracking,sered as for fumace tubes,heat exchange tubes
and pipelines in petroleum and refinery plants.
-
Original Factory A213 T12 Alloy Seamless Steel Pipe
Seamless steel pipe for high temperature operation ASTM A106, suitable for high temperature
-
New Delivery for High Pressure Boiler Seamless Steel Pipe
High-quality carbon structural steel, alloy structural steel, and stainless heat-resistant steel seamless steel pipe for high-pressure and above steam boiler pipes in GB/T5310-2007 standard.
-
Factory Supply GB/T5310,Seamless Carbon Steel Tube/ Pipe, Pressure Boiler Pipe
High-quality carbon structural steel, alloy structural steel, and stainless heat-resistant steel seamless steel pipe for high-pressure and above steam boiler pipes in GB/T5310-2007 standard.
-
Casing Pipeline, Oil Well Seamless Steel Pipe
Application：
Seamless steel pipes made of this type of steel are widely used in hydraulic props, high-pressure gas cylinders, high-pressure boilers, fertilizer equipment, petroleum cracking, automotive axle sleeves, diesel engines, hydraulic fittings, and other pipes. -
Professional Design Astm A 333 Pressure Steam Boiler Pipe Seamless Steel Pipe Used For Petroleum Pipeline
Standards:
ASME SA106—High temperature seamless carbon steel tubeASME SA179—Seamless cold drawn low carbon steel pipe for heat exchanger and condenser
ASME SA192—Seamless carbon steel boiler tube for high pressure
ASME SA210—Seamless Medium Carbon Steel Pipe for Boilers and Superheaters
ASME SA213—Seamless ferritic and austenitic alloy steel pipes for boilers, superheaters and heat exchangers
ASME SA335—Seamless ferritic alloy steel nominal tube for high temperature
DIN17175 — Seamless steel pipe made of heat-resistant steel
EN10216-2 —Unalloyed steel and alloy steel pipes with specified high temperature properties
GB5310 —Seamless steel pipe for high pressure boiler
GB3087 —Seamless steel pipe for low and medium pressure boilers
-
Carbon Seamless Steel Pipe A 53
High-quality carbon structural steel, alloy structural steel, and stainless heat-resistant steel seamless steel pipe for high-pressure and above steam boiler pipes in GB/T5310-2007 standard.
-
Popular Design for Alloy Steel Tube Alloy Steel Pipe Seamless
Standards:
ASTM A106—Seamless carbon steel pipe for high temperatureASTM A213—Seamless ferritic and austenitic alloy steel tubes for boilers, superheaters and heat exchangers
ASTM A333—Seamless and welded nominal steel pipe for low temperature
ASTM A335—Seamless ferritic alloy steel nominal tube for high temperature
EN10216-2—Unalloyed steel and alloy steel pipes with specified high temperature properties
GB9948 —Seamless steel pipe for petroleum cracking
GB6479 —Seamless steel pipe for high-pressure fertilizer equipment
-
2020 wholesale price Alloy Seamless Steel Pipe / Alloy Steel / Seamless Steel Tube
ASTM A335 standard high pressure boiler pipe seamless alloy pipe with IBR certifiaction
-
Alloy Boiler Steel Pipe Seamless/carbon Steel Pipe Seamless
Standards:
ASME SA106—High temperature seamless carbon steel tubeASME SA179—Seamless cold drawn low carbon steel pipe for heat exchanger and condenser
ASME SA192—Seamless carbon steel boiler tube for high pressure
ASME SA210—Seamless Medium Carbon Steel Pipe for Boilers and Superheaters
ASME SA213—Seamless ferritic and austenitic alloy steel pipes for boilers, superheaters and heat exchangers
ASME SA335—Seamless ferritic alloy steel nominal tube for high temperature
DIN17175 — Seamless steel pipe made of heat-resistant steel
EN10216-2 —Unalloyed steel and alloy steel pipes with specified high temperature properties
GB5310 —Seamless steel pipe for high pressure boiler
GB3087 —Seamless steel pipe for low and medium pressure boilers
-
Discount wholesale !!! Astm A335 P11 Seamless Alloy Boiler Pipe For Temperature
Standards:
ASME SA106—High temperature seamless carbon steel tubeASME SA179—Seamless cold drawn low carbon steel pipe for heat exchanger and condenser
ASME SA192—Seamless carbon steel boiler tube for high pressure
ASME SA210—Seamless Medium Carbon Steel Pipe for Boilers and Superheaters
ASME SA213—Seamless ferritic and austenitic alloy steel pipes for boilers, superheaters and heat exchangers
ASME SA335—Seamless ferritic alloy steel nominal tube for high temperature
DIN17175 — Seamless steel pipe made of heat-resistant steel
EN10216-2 —Unalloyed steel and alloy steel pipes with specified high temperature properties
GB5310 —Seamless steel pipe for high pressure boiler
GB3087 —Seamless steel pipe for low and medium pressure boilers
-
Factory source Astm A213 T22 Seamless Steel Pipe/tube
ASTM SA 213 standard
Seamless Alloy Steel Pipes Ferritic and Austenitic for boiler Superheater Heat Exchanger alloy pipes tubes
-
Newly Arrival Best Products For Import Chemical Fertilizer Pipe
Standards:
ASTM A106—Seamless carbon steel pipe for high temperatureASTM A213—Seamless ferritic and austenitic alloy steel tubes for boilers, superheaters and heat exchangers
ASTM A333—Seamless and welded nominal steel pipe for low temperature
ASTM A335—Seamless ferritic alloy steel nominal tube for high temperature
EN10216-2—Unalloyed steel and alloy steel pipes with specified high temperature properties
GB9948 —Seamless steel pipe for petroleum cracking
GB6479 —Seamless steel pipe for high-pressure fertilizer equipment
-
Factory making Astm A210 Carbon Seamless Boiler Steel Pipe/tube
ASTM SA210 standard
Seamless Medium carbon steel boiler pipes and Super heat tubes
-
Factory stainless steel fittings
note 1：all of the date is most values.
note 2：“—”means no request
① “W”means fitting for connecting.
② when the fitting is stick and plate, the most C should be 0.35
③ the forged fittings the most C is 0.35.and most Si is 0.35 and no limited for minimum
④ when the C is below most request, C reduce 0.01% and Mn will be increased 0.06%,until to most Mn is 1.35%
⑤ Cu,Ni Cr Mo total less than 1.00%
⑥ 0.32%。Cr Mo total less than 0.32 %
⑦ heat analysis and final products analysis will be both suitable.
-
seamless alloy steel pipe ASTM A335 standard high pressure boiler pipe
ASTM A335 standard high Temperature boiler pipe seamless alloy pipe with IBR certifiaction
Seamless alloy pipe for boiler ,heat exchanger etc industry
Grade Group: P5,P9,P11,P22,P91, P92 Etc.
-
alloy steel pipe
Professional sales of alloy tube 12Cr1MoV, 15CrMo, 10CrMo910, P11, P12, P22,P91 , T91, 42CrMo, 35CrMo, to provide new alloy steel tube prices. Alloy tube material :20MnG, 25MnG, 16Mn-45Mn, 27SiMn, 15CrMo, 15CrMoG, 35CrMo, 42CrMo, 12Cr2MoG, 12Cr1MoV, 12Cr1MoVG, SA210A1, C, SA213 T11, T12, T22, T23, T91, T92, P11, P12, P22, T91, P91, P5, P9, etc.
-
-
alloy pipe
ASTM A335 standard high Temperature boiler pipe seamless alloy pipe with IBR certifiaction
Seamless alloy pipe for boiler ,heat exchanger etc industry
-
The introduction of seamless ferritic alloy steel pipe A335/A335M for common alloy boiler pipe at high temperature
ASTM A335 standard high Temperature boiler pipe seamless alloy pipe with IBR certifiaction
Seamless alloy pipe for boiler ,heat exchanger etc industry
Seamless ferrite alloy nominal pipe ASTM-335 or SA-355M for high temperature, class (P1, P2, P22, P11, P22, P91 16 pieces).
Manufacturing Method (hot finishing or cold drawing) The pipe plant shall test a sufficient number of visible surface defects to ensure that the depth of defects has been properly assessed. It is not necessary to detect all surfaces for testing, but to ensure that they comply with the requirements of the next article.
Allowable deviation of diameter: :
1. For nominal tubes ordered by NPS or outside diameter, the allowable deviation of outside diameter shall not exceed the specified deviation value given in the table below. NPS positive deviation negative deviation 1.125-1.50.40.41.5-40.790.794-81.590.798-122.380.7912 plus or minus 1%
2, for the nominal tube ordered according to the inside diameter, the inside diameter deviation from the specified inside diameter should not be in the specified value of plus or minus 1%. -
seamless alloy steel pipe
ASTM A335 standard high Temperature boiler pipe seamless alloy pipe with IBR certifiaction
Seamless alloy pipe for boiler ,heat exchanger etc industry
Alloy pipe material mainly P11 P12 P22 P5 P9 P23 P91 P92
Our Company Sells Varieties: Structural Steel Tube, Fluid Steel Tube, Alloy Tube, Pressure Vessel Tube (Low And Medium Pressure Boiler Tube, High Pressure Boiler Tube, High Pressure Fertilizer Tube, Petroleum Cracking Tube), Oil Pipe, Cold Drawn Steel Pipe, And Other Products.
The Standing Materials Are SA106B, 20 G, Q345, 12 Cr1MoVG, 15 CrMoG, Cr5Mo, 1 Cr9Mo, 10 CrMo910, A335P5 / P9 / P11 / P12 / P22 / P91 / P92, Etc.
Execute ASME SA-106/SA-106M-2015, ASTMA210(A210M)-2012,ASMESA-213/SA-213M, ASTM A335/A335M-2018，ASTM-A519-2006, ASTM A53 / A53M – 2012, Etc. Gb GB8162-2018 (Structural Pipe), GB8163-2018 (Fluid Pipe), GB3087-2008 (Low And Medium Pressure Boiler Pipe), GB5310-2017 (High Pressure Boiler Pipe), Gb6479-2013 (Chemical Fertilizer Special Pipe), GB9948-2013 (Petroleum Cracking Pipe), GB/T 17396-2009(Seamless Steel Tubes For Coal Mining), Etc. There Are Also API5CT (Casing And Tubing), API 5L(Pipeline)
Products Are Applicable To Engineering, Electric Power, Boiler, Mechanical Processing, Auto Parts, Petroleum, Coal And Other Fields.
-
Seamless alloy steel pipe series A335 standard
ASTM A335 standard high Temperature boiler pipe seamless alloy pipe with IBR certifiaction
Seamless alloy pipe for boiler ,heat exchanger etc industry
A335P91 is a kind of high pressure high temperature resistant steel material. p91 is generally called A355 P91. It is a kind of material of high pressure and high temperature resistant steel pipe. The American standard is ASME SA-335/SA335M, with tensile strength ≥585(MPa), yield strength ≥415(MPa) and elongation ≥20(%). P91 is characterized by the thinning of pipe wall thickness, which is more than 40% less than that of other steel materials and more than 30% less than that of materials and installation costs. Because P91 pipe weight is reduced, the load of support and hanger is also relatively reduced, which is convenient for supporting and hoisting and convenient for design and installation.
