China Leading Manufacturer for Steel Pipe Carbon - Seamlless steel tubes for high-pressure chemical fertilizer processing equipments-GB6479-2013 – Sanonpipe Manufacturer and Supplier

Leading Manufacturer for Steel Pipe Carbon - Seamlless steel tubes for high-pressure chemical fertilizer processing equipments-GB6479-2013 – Sanonpipe

Short Description:

Product Detail

Product Tags

Feedback (2)

With this motto in mind, we've got develop into amongst one of the most technologically innovative, cost-efficient, and price-competitive manufacturers for Alloy Steel Pipe A335 P22 , 15crmog Alloy Tube , Steel Pipe Astm A53 , Our group members are goal to provides merchandise with significant performance cost ratio to our consumers, as well as target for all of us is usually to satisfy our consumers from all around the environment.

Leading Manufacturer for Steel Pipe Carbon - Seamlless steel tubes for high-pressure chemical fertilizer processing equipments-GB6479-2013 – Sanonpipe Detail:

Overview

Application

Seamless steel pipe for high pressure fertilizer equipment is a high quality carbon structural steel and alloy steel seamless steel pipe suitable for chemical equipment and pipeline.

Main Grade

Grade of high-quality carbon structural steel: 10#、20#

Chemical Component

Chemical Component/%
NO	C	Si	Mn	Cr	Mo	V	W	Nb	Ni	P S
										no more than
10	0. 07-0. 13	0. 17 -0. 37	0.35 -0. 65	-	-	-	-	-	-	0.025	0.015

20	0. 17 -0. 23	0.17 -0. 37	0. 35-0.65	-	-	-	-	-	-	0.025	0.015

Q345Ba	0. 12 -0. 20	0.20-0. 50	1.20-1.70	<0. 30	<0. 10	mis	-	<0.07	W0. 50	0.025	0.015

Q345C”	0. 12 -0. 20	0.20 -0. 50	1.20 -1. 70	W0. 30	<0. 10	<0. 15	-	W0.07	<0. 50	0.025	0.015

Q345D”	0. 12 -0. 18	0.20 -0. 50	1. 20~1.70	W0. 30	<0. 10	<0. 15	-	W0.07	<0. 50	0. 025	0.015

Q345Ea*b	0. 12 -0. 18	0. 20-0. 50	1. 20 -1.70	W0. 30	<0. 10	<0. 15	-	<0.07	<0. 50	0. 025	0.01

12CrMo	0. 08-0. 15	0.17 -0. 37	0. 40-0. 70	0. 40-0. 70	0. 40-0. 55	-	-	-	-	0. 025	0.015

15CrMo	0. 12 -0. 18	0. 17 -0. 37	0. 40-0. 70	0. 80-1. 10	0. 40-0.55	-	-	-	-	0. 025	0. 015

12Cr2Mo	0. 08-0. 15	<0. 50	0. 40-0.6	2.00-2. 50	0. 90-1. 13	-	-	-	-	0.025	0. 015

12Cr5Mo	<0. 15	<0.50	<0. 60	4. 00-6.00	0. 40-0. 60	-	-	-	<0. 60	0. 025	0. 015

lOMoWVNb	0. 07-0. 13	0. 50-0.8	0. 50-0.8	-	0. 60-0. 90	0. 30-0. 50	0. 50-0. 90	0. 06-0. 12	-	0.025	0.015

12SiMoVNb	0.08 -0. 14	0.50 -0.8	0. 60-0. 90	-	0. 90-1. 10	0. 30-0. 50	-	0. 04-0.08	-	0.025	0.015

awhen it is necessary to add fine grain elements, the steel shall contain at least one of Al, Nb, V and Ti. The added fine grain elements shall be indicated in the quality certificate. Ti content shall not be more than 0.20%
bAl content in steel shall not be less than 0.020%, or ala content in steel shall not be less than 0.015%

Mechanical Property

Grade	Mechanical Property
	Tensile MPa	Yield MPa			Elong after fracture A/%		Reduction of area Z/%	Shork absorption energy （KV2）/J
		Yield MPa						Shork absorption energy （KV2）/J
		Steel tube wall thickness/mm						Test temperature/℃	portrait	transver
		W16	>16 — 40	>40	portrait	transver			portrait	transver
		not less than							not less than
10	335〜490	205	195	185	24	22	一	一	—	一
20	410〜550	245	235	225	24	22	一	0	40	27
Q345B	490〜670	345	335	325	21	19	一	20	40	27
Q345C	490〜670	345	335	325	21	19	一	0	40	27
Q345D	490〜670	345	335	325	21	19	一	-20	40	27
Q345E	490〜670	345	335	325	21	19	—	-40	40	27
12CrMo	410~560	205	195	185	21	19	—	20	40	27
15CrMo	440〜640	295	285	275	21	19	一	20	40	27
12Cr2Moa	450〜60。	280			20	18	一	20	40	27
12Cr5Mo	390〜590	195	185	175	22	20	一	20	40	27
lOMoWVNb	470〜670	295	285	275	19	17	一	20	40	27
12SiMoVNb	2470	315	305	295	19	17	50	20	40	27
a 12Cr2Mo pipe，When D<30 mm and SW3 mm，the lower yield strength or specified plastic extension strength can be reduced by 10 MPa.

Test Requirement

In addition to ensuring the chemical composition and mechanical properties, the steel pipe directly rolled by ingot shall be subject to low power inspection, and eddy current inspection or magnetic flux leakage inspection can be used instead of hydraulic test.

Supply Ability

2000 Tons Per Month Per Grade of Seamless steel tubes for high-pressure

chemical fertilizer processing equipments.

Packaging

In Bundles And In Strong Wooden Box

Delivery

7-14 days if in stock, 30-45 days to produce

Payment

30% depsoit, 70% L/C or B/L copy or 100% L/C at sight

Product Detail

mechanical/Chemical&Fertilizer Pipes

GB/T8162-2008

ASTM_A519-2006

BS EN 10210-1-2006

ASTM A53A53M-2012

GB9948-2006

GB6479-2013

GB/T 17396-2009

Product detail pictures:

Related Product Guide:

The key to our success is "Good Product or service High quality, Reasonable Rate and Efficient Service" for Leading Manufacturer for Steel Pipe Carbon - Seamlless steel tubes for high-pressure chemical fertilizer processing equipments-GB6479-2013 – Sanonpipe , The product will supply to all over the world, such as: Iceland , Brisbane , Curacao , With more than 9 years of experience and a professional team, we have exported our products to many countries and regions all over the world. We welcome customers, business associations and friends from all parts of the world to contact us and seek cooperation for mutual benefits.

16mn Grade Alloy Steel Seamless