China Ordinary Discount Steel Pipe Manufacturer - Seamless, welded and hot-dip galvanized pipe – Sanonpipe Manufacturer and Supplier

Ordinary Discount Steel Pipe Manufacturer - Seamless, welded and hot-dip galvanized pipe – Sanonpipe

Short Description:

Product Detail

Product Tags

Feedback (2)

As for aggressive costs, we believe that you will be searching far and wide for anything that can beat us. We can state with absolute certainty that for such high-quality at such rates we have been the lowest around for Alloy Steel Wp22 Pipe Fittings , Alloy Pipe , Chinese Steel Pipe Factory , We wish to just take this opportunity to ascertain long-term enterprise relationships with clients from all over the earth.

Ordinary Discount Steel Pipe Manufacturer - Seamless, welded and hot-dip galvanized pipe – Sanonpipe Detail:

Overview

Application

It Is Mainly Used for force and pressure parts, and for general purpose steam, water, gas and air pipes.

Main Grade

GR.A, GR.B

Chemical Component

Grade	Component %，≤
Grade	C	Mn	P	S	Cu^A	Ni^A	Cr^A	Mo^A	V^A
S type（seamless pipe）
GR.A	0.25^B	0.95	0.05	0.045	0.40	0.40	0.40	0.15	0.08
GR.B	0.30^C	1.20	0.05	0.045	0.40	0.40	0.40	0.15	0.08
E type（Resistance welded pipe）
GR.A	0.25^B	0.95	0.05	0.045	0.40	0.40	0.40	0.15	0.08
GR.B	0.30^C	1.20	0.05	0.045	0.40	0.40	0.40	0.15	0.08
F type（Furnace Welded Pipe）
A	0.30^B	1.20	0.05	0.045	0.40	0.40	0.40	0.15	0.08

A The sum of these five elements must not be greater than 1.00%。

B For every 0.01% decrease in the maximum carbon content, the maximum manganese content is allowed to increase by 0.06%, but the maximum cannot exceed 1.35%.

C Each 0.01% decrease in the maximum carbon content will allow the maximum manganese content to increase by 0.06%, but the maximum must not exceed 1.65%.

Mechanical Property

item

GR.A

GR.B

tensile strength, ≥, psi [MPa]

Yield Strength, ≥, psi [MPa]

Gauge 2in.or 50mm elongation

48 000 [330]30 000 [205]A,B

60 000 [415]35 000 [240]A,B

A The minimum elongation of gauge length 2in. (50mm) shall be determined by the following formula：

e=625000(1940)A^0.2/U^0.9

e = the minimum elongation of the gauge 2in. (50mm), the percentage rounded to the nearest 0.5%;

A = Calculated according to the specified outer diameter of the nominal tube or the nominal width of the tensile sample and its specified wall thickness, and rounded to the nearest cross-sectional area of the tensile sample of 0.01 in.2 (1 mm2), and It is compared with 0.75in.2 (500mm2), whichever is smaller.

U = specified minimum tensile strength, psi (MPa).

B For various combinations of different sizes of tensile test specimens and prescribed minimum tensile strength, the required minimum elongation is shown in Table X4.1 or Table X4.2, according to its applicability.

Test Requirement

Tensile test, bending test, hydrostatic test, nondestructive electrical test of welds.

Supply Ability

Supply Ability: 2000 Tons Per Month Per Grade Of ASTM A53/A53M-2012 Steel Pipe

Packaging

In Bundles And In Strong Wooden Box

Delivery

7-14 days if in stock, 30-45 days to produce

Payment

30% depsoit, 70% L/C or B/L copy or 100% L/C at sight

Product Detail

Boiler Tube

GB/T 8162-2008

ASTM A519-2006

BS EN10210-1-2006

ASTM A53/A53M-2012

GB9948-2006

GB6479-2013

GB/T 17396-2009

Product detail pictures:

Related Product Guide:

owing to excellent assistance, a variety of high quality products and solutions, aggressive costs and efficient delivery, we take pleasure in an excellent popularity amongst our customers. We are an energetic business with wide market for Ordinary Discount Steel Pipe Manufacturer - Seamless, welded and hot-dip galvanized pipe – Sanonpipe , The product will supply to all over the world, such as: Guatemala , Czech Republic , Belgium , We have been sincerely looking forward to cooperate with customers all over the world. We believe we can satisfy you with our high-quality products and solutions and perfect service . We also warmly welcome customers to visit our company and purchase our products.

16mn Grade Alloy Steel Seamless