China Std Carbon Seamless Pipe A106 Gr. B - Hot finished structural hollow sections of non-alloy and fine grain steels – Sanonpipe Manufacturer and Supplier

Std Carbon Seamless Pipe A106 Gr. B - Hot finished structural hollow sections of non-alloy and fine grain steels – Sanonpipe

Short Description:

Product Detail

Product Tags

Feedback (2)

Our goods are commonly recognized and reliable by consumers and may satisfy continually developing economic and social needs for Steel Pipe Astm A53 , Alloy Steel Pipe Asme 335 , Tube , We put honest and health as the primary responsibility. We have a professional international trade team which graduated from America. We are your next business partner.

Std Carbon Seamless Pipe A106 Gr. B - Hot finished structural hollow sections of non-alloy and fine grain steels – Sanonpipe Detail:

Overview

Application

It Is Mainly Used for Mechanical structure，general structure.

Main Grade

S235GRH, S275JOH, S275J2H, S355JOH, S355J2H

Chemical Component

grade		Deoxygenated Type a	% Mass, maximum
Steel name	Steel nmber		C Prescribed wall thickness mm		Si	Mn	P	S	Nbc
Steel name	Steel nmber		≤ 40	＞ 40≤ 120	Si	Mn	P	S	Nbc
S235JRH	1.0039	FN	0.17	0.20	—	1.40	0.040	0.040	0.009
S275J0H	1.0149	FN	0.20	0.22	—	1.50	0.035	0.035	0.009
S275J2H	1.0138	FF	0.20	0.22	—	1.50	0.030	0.030	—
S355J0H	1.0547	FN	0.22	0.22	0.55	1.60	0.035	0.035	0.009
S355J2H	1.0576	FF	0.22	0.22	0.55	1.60	0.030	0.030	—
S355K2H	1.0512	FF	0.22	0.22	0.55	1.60	0.030	0.030	—
a The definition of deoxidation method is as follows: FN = Boiling steel is not allowed FF = fully-killed steel containing nitrogen-binding elements in an amount sufficient to bind possible nitrogen (E.g. 0.020% minimum total aluminum or 0.015% soluble aluminum) b It is allowed to exceed the specified value, as long as the N content increases by 0.001%, the maximum content of P decreases by 0.005% at the same time. The N content in the smelting analysis should not exceed 0.012%. c If the chemical composition shows a minimum total aluminum content of 0.020% and a minimum Al / N ratio of 2: 1, or if other sufficient nitrogen-binding elements are present, the above maximum nitrogen content limits do not apply. Nitrogen binding elements shall be noted in the inspection documents.

Mechanical Property

Grade

Minimum yield

tensile strength

Minimum elongation

Minimum impact power

Steel name

Steel number

Standard thickness

≤16

＞ 16

≤ 40

＞ 40

≤ 63

＞ 63

≤ 80

＞ 80

≤ 100

＞ 100

≤ 120

≤3

＞ 3

≤100

＞ 100

≤ 120

≤40

＞40≤63

＞63≤100

＞100≤120

-20℃

0℃

20℃

S235JRH

1.0039

235

225

215

195

360-510

360-500

S275J0Hc

1.0149

275

265

255

245

235

225

430-580

410-560

400-540

S275J2H

1.0138

S355J0Hc

1.0547

355

345

355

325

315

295

510-680

470-630

450-600

S355J2H

1.0576

S355K2H

1.0512

a Longitudinal sample value. The standard value of the transverse specimen is 2% lower than this value.b For thicknesses <3mm, see 9.2.2.c Only when option 1.3 is applied, confirmation of impact performance is required.d See 6.6.2 for the impact properties of small-sized specimens.e This value is equivalent to 27J at -30 ° C (see EN 1993-1-1).

Test Requirement

Hardness Test, Tension Tests, Nondestructive Tests, Steel Cleanliness, Hardenability, Flaring Test

Supply Ability

Supply Ability: 2000 Tons Per Month Per Grade Of BSEN10210-1-2006 Steel Pipe

Packaging

In Bundles And In Strong Wooden Box

Delivery

7-14 days if in stock, 30-45 days to produce

Payment

30% depsoit, 70% L/C or B/L copy or 100% L/C at sight

Product Detail

Seamless Steel Tubes For Mechanical Engineering And Normal Structure

GB/T8162-2008

ASTM A519-2006

BS EN 10210-1-2006

ASTM A53/A53M-2012

GB9948-2006

GB6479-2013

GB/T 17396-2009

Product detail pictures:

Related Product Guide:

We aim to find out quality disfigurement from the production and supply the best service to domestic and overseas customers wholeheartedly for Std Carbon Seamless Pipe A106 Gr. B - Hot finished structural hollow sections of non-alloy and fine grain steels – Sanonpipe , The product will supply to all over the world, such as: Mombasa , Guatemala , Austria , We supply skilled service, prompt reply, timely delivery, excellent quality and best price to our customers. Satisfaction and good credit to every customer is our priority. We focus on every detail of order processing for customers till they have received safe and sound items with good logistics service and economical cost. Depending on this, our products and solutions are sold very well in the countries in Africa, the Mid-East and Southeast Asia. Adhering to the business philosophy of ??customer first, forge ahead', we sincerely welcome clients from at home and abroad to cooperate with us.

Alloy Steel Pipe Manufacturers