Super Lowest Price Factory Direct Sale Hot Sales Lowest Price ASTM A106/A53/Q235/Q195 Seamless Round Carbon Steel Pipe Tube
Our eternal pursuits are the attitude of “regard the market, regard the custom, regard the science” as well as the theory of “quality the basic, have confidence in the very first and management the advanced” for Super Lowest Price Factory Direct Sale Hot Sales Lowest Price ASTM A106/A53/Q235/Q195 Seamless Round Carbon Steel Pipe Tube, We have now experienced manufacturing facilities with a lot more than 100 workers. So we are able to guarantee short lead time and good quality assurance.
Our eternal pursuits are the attitude of “regard the market, regard the custom, regard the science” as well as the theory of “quality the basic, have confidence in the very first and management the advanced” for low pressure boiler p[ipe, Our focus on product quality, innovation, technology and customer service has made us one of undisputed leaders worldwide in the field. Bearing the concept of “Quality First, Customer Paramount, Sincerity and Innovation” in our mind, Now we have achieved great progress in the past years. Clients are welcomed to buy our standard products and solutions, or send us requests. You might be impressed by our quality and price. Please contact us now!
Overview
Application
It is mainly used to make high-quality carbon structural steel, low pressure medium pressure boiler pipe, super heated steam seamless carbon steel pipe
Main Grade
Grade of high-quality carbon structural steel: 10#,20#
Chemical Component
| Standard | Grade | Chemical Composition(%) | |||||||
| C | Si | Mn | P | S | Cr | Cu | Ni | ||
| GB3087 | 10 | 0.07～0.13 | 0.17～0.37 | 0.38～0.65 | ≤0.030 | ≤0.030 | 0.3～0.65 | ≤0.25 | ≤0.30 |
| 20 | 0.17～0.23 | 0.17～0.37 | 0.38～0.65 | ≤0.030 | ≤0.030 | 0.3～0.65 | ≤0.25 | ≤0.30 | |
Mechanical Property
| Standard | Steel pipe | Wall thickness | Tensile strength | Yield Strength | Elongation |
| GB3087 | (mm) | (MPa) | (MPa) | % | |
| ≥ | |||||
| 10 | / | 335～475 | 195 | 24 | |
| 20 | ＜15 | 410～550 | 245 | 20 | |
| ≥15 | 225 | ||||
Tolerance
Permissible deviation of outer diameter of steel tubes
| Type of steel tube | Permissible deviation | ||||||
| Hot rolled (extruded, expanded) steel tube | ± 1.0% D or ± 0.50, take the greater number | ||||||
| Cold drawn (rolled) steel tube | ± 1.0% D or ± 0.30, take the greater number | ||||||
Permissible deviation of the wall thickness of hot rolled (extrusion, expansion) steel tubes
Unit: mm
| Type of steel tube | Outer diameter of steel tube | S / D | Permissible deviation | ||||||
| hot rolled (extruded) steel tube | ≤ 102 | – | ± 12.5 % S or ± 0.40, take the greater number | ||||||
| > 102 | ≤ 0.05 | ± 15% S or ± 0.40, take the greater number | |||||||
| > 0.05 ~ 0.10 | ± 12.5% S or ± 0.40, take the greater number | ||||||||
| > 0.10 | + 12.5% S | ||||||||
| - 10% S | |||||||||
| hot expand steel tube | + 15% S | ||||||||
Permissible deviation of the wall thickness of cold drawn (rolled) steel tubes
Unit: mm
| Type of steel tube | Wall thickness | Permissible deviation | ||||||
| Cold drawn (rolled) steel tube | ≤ 3 | 15 – 10 % S or ± 0.15, take the greater number | ||||||
| > 3 | + 12.5% S | |||||||
| - 10% S | ||||||||
Test Requirement
Flattening test
Steel tubes with an outer diameter greater than 22 mm and up to 400 mm, and wall thickness greater than 10 mm should undergo the flattening test. After the samples are flattened
Bending test
Steel tubes with an outer diameter not greater than 22 mm should undergo the bending test. The bending angle is 90o . The bending radius is 6 times the outer diameter of the steel tube.After bending the sample, no fissures or cracks are permitted to appear on the sample.
Macroscopic examination
For steel tubes directly made by continuously cast billets or steel ingots, the supplying party should guarantee that there are no white spots, impurities, sub-surface air bubbles, skull patches or layering on the cross-sectional acid pickled macroscopic tissue of the billet or steel tube.
Non-destructive inspection
According to the demanding party’s request, which is then negotiated between the supplying and demanding parties and indicated in the agreement, ultrasonic flaw detection may be individually performed for steel tubes. The longitudinal manual defect of the reference sample tube should meet the requirements for post-inspection acceptance grade C8 specified in GB/T 5777-1996.
Product Detail
High Pressure Boiler Tube
GB/T5310-2017
ASME SA-106/SA-106M-2015
ASTMA210(A210M)-2012
ASME SA-213/SA-213M
ASTM A335/A335M-2018
Our eternal pursuits are the attitude of “regard the market, regard the custom, regard the science” as well as the theory of “quality the basic, have confidence in the very first and management the advanced” for Super Lowest Price Factory Direct Sale Hot Sales Lowest Price API 5L ASTM A106/A53/Q235/Q195 Seamless Round Carbon Steel Pipe Tube, We have now experienced manufacturing facilities with a lot more than 100 workers. So we are able to guarantee short lead time and good quality assurance.
Super Lowest Price China Carbon Steel and Carbon Steel Pipe, Our focus on product quality, innovation, technology and customer service has made us one of undisputed leaders worldwide in the field. Bearing the concept of “Quality First, Customer Paramount, Sincerity and Innovation” in our mind, Now we have achieved great progress in the past years. Clients are welcomed to buy our standard products and solutions, or send us requests. You might be impressed by our quality and price. Please contact us now!
