OEM/ODM Factory China Carbon enweghị nkebi na obere okpomọkụ ígwè Pipe na tube
Anyị ga-etinye onwe anyị n'inye ndị na-azụ ahịa anyị a na-akwanyere ùgwù na-eji ọrụ ndị na-anụ ọkụ n'obi na-eche echiche maka OEM / ODM Factory China Seamless Carbon and Low Temperature Steel Pipe naTube, Ọtụtụ mgbe na ọtụtụ ndị ọrụ ụlọ ọrụ azụmahịa na ndị ahịa na-enye ihe ngwọta dị elu kacha mma na ndị na-eweta ọmarịcha ihe.Obi ụtọ nabata isonyere anyị, ka anyị ọhụrụ ọnụ, na-efe efe nrọ.
Anyị ga-etinye onwe anyị n'inye ndị na-azụ ahịa anyị na-akwanyere ùgwù na-eji ọrụ ndị nwere ịnụ ọkụ n'obi na-eche echiche makaỌkụ China enweghị nkebi, Tube, Anyị ji ezi obi na-atụ anya ịmalite mmekọrịta azụmahịa dị mma na ogologo oge na ụlọ ọrụ gị a na-akwanyere ùgwù site na ohere a, dabere na nha anya, uru otu na imeri azụmahịa site ugbu a ruo n'ọdịnihu."afọ ojuju gị bụ obi ụtọ anyị".
Nchịkọta
Ngwa
Igwe anaghị agba nchara maka ọrụ okpomọkụ dị elu ASTM A106, dabara maka oke okpomọkụ
Isi ọkwa
Ọkwa nke igwe nrụpụta carbon dị elu: GR.A, GR.B, GR.C
Ngwakọta kemịkalụ
| Nhazi, （ | |||
| Ọkwa A | Ọkwa B | Ọkwa C | |
| Carbon, max | 0.25A | 0.3B | 0.35B |
| Manganese | 0.27-0.93 | 0.29-1.06 | 0.29-1.06 |
| Phosphorus, max | 0,035 | 0,035 | 0,035 |
| Sulfur, max | 0,035 | 0,035 | 0,035 |
| Silikoni, min | 0.10 | 0.10 | 0.10 |
| Chrome, maxC | 0.40 | 0.40 | 0.40 |
| Ọla kọpa, maxC | 0.40 | 0.40 | 0.40 |
| Molybdenum, maxC | 0.15 | 0.15 | 0.15 |
| Nickel, maxC | 0.40 | 0.40 | 0.40 |
| Vanadium, maxC | 0.08 | 0.08 | 0.08 |
| A Maka mbelata ọ bụla nke 0.01% n'okpuru oke carbon akọwapụtara, mmụba nke 0.06% manganese karịa nke akọwapụtara ka a ga-ahapụ ruo oke nke 1.35%. | |||
| B Ọ gwụla ma onye zụrụ ya akọwapụtaghị ya, maka mbelata ọ bụla nke 0.01% n'okpuru oke carbon a kapịrị ọnụ, mmụba nke 0.06% manganese karịa nke akọwapụtara ka a ga-ahapụ ruo oke 1.65%. | |||
| C ihe ise a jikọtara agaghị agafe 1%. | |||
Ngwongwo igwe
| Ọkwa A | Ọkwa B | Ọkwa C | ||||||
| Ike tensile, min, psi(MPa) | 48 000 (330) | 60000 (415) | 70000 (485) | |||||
| Ike mpụta, min, psi(MPa) | 30000 (205) | 35 000 (240) | 40000 (275) | |||||
| Ogologo ogologo | Transverse | Ogologo ogologo | Transverse | Ogologo ogologo | Transverse | |||
| Mgbatị n'ime inch 2 (50 mm), nkeji, % Basic kacha nta elongation transverse warara ule, na niile obere nha nwalere na zuru ngalaba | 35 | 25 | 30 | 16.5 | 30 | 16.5 | ||
| Mgbe ọkọlọtọ gburugburu 2-in.(50-mm) a na-eji ihe nlere anya ogologo nlele | 28 | 20 | 22 | 12 | 20 | 12 | ||
| Maka ule eriri ogologo ogologo | A | A | A | |||||
| Maka ule ntụgharị ntụgharị, mwepu maka 1/32-in ọ bụla.(0.8-mm) mbelata nke mgbidi dị n'okpuru 5/16 inch (7.9 mm) site na ntinye kacha nta nke kacha nta nke pasent ndị a ga-eme. | 1.25 | 1.00 | 1.00 | |||||
| A ga-ekpebi elongation kacha nta na inch 2 (50 mm) site na nha nha ndị a: | ||||||||
| e=625000A 0.2 / U 0.9 | ||||||||
| maka nkeji inch-paụnd, na | ||||||||
| e=1940A 0.2 / U 0.9 | ||||||||
| maka nkeji SI, | ||||||||
| ebe: e = elongation kacha nta na 2 in. (50 mm), %, gbachie na 0.5% kacha nso, A = mpaghara obe nke ihe nlere ule erughị ala, in.2 (mm2), dabere na nke akọwapụtara n'èzí ma ọ bụ n'ọnụ ọnụ nke akọwapụtara n'èzí dayameta ma ọ bụ obosara ihe atụ na ọkpụrụkpụ mgbidi akọwapụtara, gbachie na 0.01 in.2 (1 mm2) kacha nso. .(Ọ bụrụ na mpaghara si otú a gbakọọ hà nhata ma ọ bụ karịa 0.75 in.2 (500 mm2), mgbe ahụ, uru 0.75 in.2 (500 mm2) ga-eji.), na U = ike tensile akọwapụtara, psi (MPa). | ||||||||
Achọrọ nnwale
Na mgbakwunye na ịgba mbọ hụ na mejupụtara kemịkalụ na akụrụngwa akụrụngwa, a na-eme nnwale hydrostatic n'otu n'otu, a na-eme nnwale flaring na flattening..Na mgbakwunye, enwere ụfọdụ ihe achọrọ maka microstructure, nha ọka, na oyi akwa decarburization nke ọkpọkọ ígwè emechara.
Ikike inye
Ịkwanye ikike: 1000 ton kwa ọnwa kwa ọkwa nke ASTM SA-106 Steel Pipe
Nkwakọ ngwaahịa
Na ngwugwu na igbe osisi siri ike
Nnyefe
7-14 ụbọchị ma ọ bụrụ na ngwaahịa, 30-45 ụbọchị na-emepụta
Ịkwụ ụgwọ
30% nkwụnye ego, 70% L / C ma ọ bụ B / L oyiri ma ọ bụ 100% L / C na anya
Nkọwa ngwaahịa
Igwe mmiri ọkụTube
GB/T5310-2017
ASME SA-106/SA-106M-2015
ASTMA210 (A210M) -2012
ASME SA-213/SA-213M
