ASTM A210

Takaitaccen Bayani:

Bututun tukunyar jirgida bututun hayaƙin tukunyar jirgi, gami da amintattun rukunin ƙarewa da bututun ginshiƙai da ƙaramin bango mara ƙarfi matsakaici bututun ƙarfe na bututu don superheater bututu. Babban kayan shineSA210Saukewa: GA1.SA210


  • Biya:30% ajiya, 70% L / C ko B / L kwafin ko 100% L / C a gani
  • Min. Yawan oda:20T
  • Ikon bayarwa:Tons 20000 na Ƙarfe na Bututun Karfe na shekara
  • Lokacin Jagora:7-14 kwanaki idan a stock, 30-45 kwanaki don samar
  • Shiryawa:Black Vanishing, bevel da hula ga kowane bututu guda; OD da ke ƙasa da 219mm yana buƙatar tattarawa a cikin dam, kuma kowane buɗaɗɗen bai wuce tan 2 ba.
  • Cikakken Bayani

    Tags samfurin

    Dubawa

    Daidaito:ASTM SA210 Alloy Ko A'a: Carbon Karfe
    Rukunin Daraja: GRA. GrC Aikace-aikace: Boiler Pipe
    Kauri: 1-100 mm Surface Jiyya: A matsayin abokin ciniki ta bukata
    Diamita na waje (Zagaye): 10 - 1000 mm Dabarar: Zane Mai Zafi/Cikin Sanyi
    Tsawon: Kafaffen tsayi ko tsayin bazuwar Maganin zafi: Annealing / normalizing
    Siffar Sashe: Zagaye Bututu na Musamman: Bututun bango mai kauri
    Wurin Asalin: China Anfani: Boiler da Heat Exchanger
    Takaddun shaida: ISO9001:2008 Gwajin: ET/UT

     

    Aikace-aikace

    Ana amfani dashi galibi don yin ƙarfe na ƙarfe maras inganci, don bututun tukunyar jirgi, bututun zafi mai zafi

    don masana'antar bolier, bututu mai canza zafi da dai sauransu Tare da girman girman da kauri

    Babban Daraja

    Matsayi na babban ingancin carbon tukunyar jirgi: GRA, GrC

    Abubuwan Sinadari

    Abun ciki Darasi A Darasi C
    C ≤0.27 ≤0.35
    Mn ≤0.93 0.29-1.06
    P ≤0.035 ≤0.035
    S ≤0.035 ≤0.035
    Si 0.1 0.1

    A Ga kowane raguwa na 0.01 % ƙasa da ƙayyadadden iyakar carbon, haɓakar 0.06 % manganese sama da iyakar ƙayyadaddun za a ba da izini har zuwa iyakar 1.35 %.

    Kayan Injiniya

      Darasi A Darasi C
    Ƙarfin Ƙarfi ≥ 415 ≥ 485
    Ƙarfin Haɓaka ≥ 255 ≥ 275
    Yawan haɓakawa ≥ 30 ≥ 30

     

    Bukatar Gwaji

    Gwajin Ruwa:

    Yakamata a gwada bututun Karfe da ruwa daya bayan daya. Matsakaicin Matsayin Gwajin shine MPa 20. Ƙarƙashin Ƙarƙashin Gwajin, Lokacin Tsabtatawa bai kamata ya zama ƙasa da 10 S ba, kuma Bututun Karfe Kada ya zube.

    Bayan Mai Amfani Ya Yarda, Ana iya Mayar da Gwajin Hydraulic Ta Gwajin Eddy Yanzu Ko Gwajin Leakage Magnetic Flux.

    Gwajin Lalacewa:

    Tubes Tare da Diamita Waje Sama da 22 mm Za a Yi gwajin Lalacewa. Babu Bayyanannen Haɓakawa, Farin Tabo, Ko Najasa da yakamata su Faru yayin Gabaɗayan Gwajin.

    Gwajin Fitowa:

    Dangane da buƙatun mai siye kuma an faɗi a cikin kwangilar, bututun ƙarfe tare da diamita na waje ≤76mm da kauri bango ≤8mm Ana iya yin gwajin Flaring. Anyi Gwajin A Zazzafar Daki Tare da Tafiyar 60 °. Bayan Flaring, Matsakaicin Matsakaicin Diamita na waje yakamata ya dace da buƙatun Tebu mai zuwa, kuma Dole ne kayan gwajin kada ya nuna fashe ko rips.

    Gwajin Tauri:

    Za a yi gwajin taurin Brinell ko Rockwell akan samfurori daga bututu biyu daga kowane kuri'a

    Cikakken Bayani


  • Na baya:
  • Na gaba:

  • Ku rubuta sakonku anan ku aiko mana