Babban ingancin China Sch40 A53 A106 API 5L Bututun Carbon Karfe da Welded
Dubawa
"Gaskiya, Innovation, Rigorousness, da Inganci" na iya zama ra'ayi na ƙungiyarmu, don wannan dogon lokaci zuwa daidaituwar juna, A halin yanzu, sunan kamfani yana da carbon karfe da samfuran Cr Mo Alloy Karfe kuma sun sami ingantaccen rikodin waƙa da babban hannun jari. a kasuwar gida da waje.
Ɗaya daga cikin abubuwan da muke amfani da bututun mu shine ayyukan wuta, kamar sufurin ruwa don aikin wuta, kariya ta wayar lantarki don tsarin wuta na wuta da sauransu.
Lura, bututun ƙarfe na ƙarfe, bututun jan ƙarfe, bututun gami, bututu masu haɗaka, bututun ƙarfe na carbon, da sauransu ana amfani da su don bututun kashe wuta. Girman buƙatun sun bambanta da bututu na gaba ɗaya kuma suna da buƙatun nasu na musamman. Bututun kashe gobara gabaɗaya suna buƙatar fenti da jan fenti ko jan da'irar. Don bambanta shi da sauran bututun.
A cikin ainihin aiki, sassa daban-daban na tsarin kariyar wuta suna da buƙatu daban-daban don nau'ikan bututu da kayan aiki, kamar: bututun sama a cikin bututun wuta na cikin gida, lokacin da tsarin aiki ya yi ƙasa da ko daidai da 1.20MPa, bututun ƙarfe mai zafi na galvanized. za a iya amfani da; Lokacin da matsa lamba na aiki ya fi 1.20MPa, za a yi amfani da bututun ƙarfe mai zafi mai kauri mai kauri ko bututun ƙarfe mara nauyi; lokacin da tsarin aiki matsa lamba ya fi 1.60MPa, zafi-tsoma galvanized karfe bututu za a yi amfani da.
Aikace-aikace
Sumul karfe bututu for high zafin jiki aiki ASTM A106, dace da high zafin jiki
Babban Daraja
Matsayi na babban ingancin tsarin ƙarfe na carbon: GR.A, GR.B, GR.C
Abubuwan Sinadari
| Rubutu, （ | |||
| Darasi A | Darasi B | Darasi C | |
| Carbon, max | 0.25A | 0.3B | 0.35B |
| Manganese | 0.27-0.93 | 0.29-1.06 | 0.29-1.06 |
| Phosphorus, max | 0.035 | 0.035 | 0.035 |
| Sulfur, max | 0.035 | 0.035 | 0.035 |
| Silikon, min | 0.10 | 0.10 | 0.10 |
| Chrome, maxC | 0.40 | 0.40 | 0.40 |
| Copper, maxC | 0.40 | 0.40 | 0.40 |
| Molybdenum, maxC | 0.15 | 0.15 | 0.15 |
| Nickel, maxC | 0.40 | 0.40 | 0.40 |
| Vanadium, maxC | 0.08 | 0.08 | 0.08 |
| A Ga kowane raguwa na 0.01% ƙasa da ƙayyadaddun iyakar carbon, haɓakar 0.06% manganese sama da iyakar ƙayyadaddun za a ba da izini har zuwa matsakaicin 1.35%. | |||
| B Sai dai in ba haka ba wanda mai siye ya ayyana, ga kowane raguwar 0.01% ƙasa da ƙayyadaddun iyakar carbon, za a ba da izinin haɓaka 0.06% manganese sama da iyakar ƙayyadaddun har zuwa matsakaicin 1.65%. | |||
| C Wadannan abubuwa biyar da aka haɗe ba za su wuce 1% ba. | |||
Kayan Injiniya
| Darasi A | Darasi B | Darasi C | ||||||
| Ƙarfin ɗamara, min, psi(MPa) | 48000 (330) | 60000 (415) | 70000 (485) | |||||
| Ƙarfin Haɓaka, min, psi(MPa) | 30000 (205) | 35000 (240) | 40000 (275) | |||||
| Tsayi | Canza | Tsayi | Canza | Tsayi | Canza | |||
| Tsawaita cikin inci 2 (50 mm), min, % Mahimmin ƙarancin gwajin tsiri mai tsayi na elongation, kuma ga duk ƙananan girman da aka gwada a cikin cikakken sashe | 35 | 25 | 30 | 16.5 | 30 | 16.5 | ||
| Lokacin daidaitaccen zagaye 2-in. (50-mm) ana amfani da samfurin gwajin tsayin ma'auni | 28 | 20 | 22 | 12 | 20 | 12 | ||
| Don gwajin tsiri mai tsayi | A | A | A | |||||
| Don gwaje-gwajen tsiri mai jujjuyawa, ragi ga kowane 1/32-in. (0.8-mm) raguwa a kaurin bangon da ke ƙasa da 5/16 in. (7.9 mm) daga ƙaramin ƙaramar ƙaranci na kashi mai zuwa za a yi. | 1.25 | 1.00 | 1.00 | |||||
| A mafi ƙarancin elongation a cikin inci 2. (50 mm) za a ƙayyade ta ma'auni mai zuwa: | ||||||||
| e=625000A 0.2 / U 0.9 | ||||||||
| don raka'a-laba, da | ||||||||
| e=1940A 0.2 / U 0.9 | ||||||||
| don raka'a SI, | ||||||||
| inda: e = ƙaramar haɓakawa a cikin 2 in. (50 mm), %, zagaye zuwa mafi kusa 0.5%, A = yankin giciye na samfurin gwajin tashin hankali, a cikin.2 (mm2), dangane da ƙayyadaddun diamita na waje ko ƙayyadaddun ƙayyadaddun diamita na waje ko faɗin ƙirar ƙira da ƙayyadadden kauri na bango, zagaye zuwa mafi kusa 0.01 in.2 (1 mm2) . (Idan yankin da aka lissafta haka yana daidai da ko mafi girma fiye da 0.75 in.2 (500 mm2), to za a yi amfani da ƙimar 0.75 in.2 (500 mm2). U = ƙayyadadden ƙarfin ƙarfi, psi (MPa). | ||||||||
Bukatar Gwaji
Baya ga tabbatar da abun da ke tattare da sinadarai da kaddarorin injina, ana yin gwaje-gwajen hydrostatic daya bayan daya, kuma ana yin gwaje-gwajen flaring da flattening. . Bugu da ƙari, akwai wasu buƙatu don ƙananan ƙwayoyin cuta, girman hatsi, da decarburization Layer na bututun ƙarfe da aka gama.
Ƙarfin Ƙarfafawa
Ikon samarwa: Ton 1000 a kowane wata kowane Grade na ASTM SA-106 Bututu Karfe
Marufi
A cikin daure da A cikin Akwatin katako mai ƙarfi
Bayarwa
7-14 kwanaki idan a stock, 30-45 kwanaki don samar
Biya
30% depsoit, 70% L/C ko B/L kwafin ko 100% L/C a gani
Cikakken Bayani
Tubu mai tukunyar jirgi
GB/T5310-2017
ASME SA-106/SA-106M-2015
ASTMA210(A210M) -2012
ASME SA-213/SA-213M
