English
中文

Superheated tururi bututu, manya da kanana hayaki bututu da baka bulo bututu, GB9948-2006

Bututu mai zafi mai zafi, bututun hayaki babba da ƙanana da bututun bulo, GB9948-2006 Fitaccen Hoton
  • Superheated tururi bututu, manya da kanana hayaki bututu da baka bulo bututu, GB9948-2006
  • Superheated tururi bututu, manya da kanana hayaki bututu da baka bulo bututu, GB9948-2006
  • Superheated tururi bututu, manya da kanana hayaki bututu da baka bulo bututu, GB9948-2006

Takaitaccen Bayani:

 

GB9948S na cikin bututun ƙarfe maras nauyi, ana amfani da bututun matatar mai, bututun musayar zafi da bututu mara ƙarfi, bututun bangon ruwa, bututun ruwan zafi, bututun ruwan zafi, bututu mai zafi mai zafi, bututun tukunyar jirgi superheated tururi bututu, babba, ƙaramin hayaki bututu da bututun baka. Ana amfani dashi don kera bututu mai zafi, bututu mai reheater, bututu, babban bututun tururi, da sauransu.

.High ingancin carbon tsarin karfe maki ne 20g,

20mng da 25mng; Alloy tsarin karfe maki: 15mog, 20mog, 12crmog, 15CrMoG, 12Cr2MoG, 12CrMoVG, da dai sauransu


  • Biya:30% ajiya, 70% L / C ko B / L kwafin ko 100% L / C a gani
  • Min. Yawan oda:1 PC
  • Ikon bayarwa:Tons 20000 na Ƙarfe na Bututun Karfe na shekara
  • Lokacin Jagora:7-14 kwanaki idan a stock, 30-45 kwanaki don samar
  • Shiryawa:Black Vanishing, bevel da hula ga kowane bututu guda; OD da ke ƙasa da 219mm yana buƙatar tattarawa a cikin dam, kuma kowane buɗaɗɗen bai wuce tan 2 ba.
    • Zazzage azaman PDF

    Cikakken Bayani

    15Crmo

    Tags samfurin

    Dubawa

    Daidaito:GB9948-2006 Maganin zafi: Annealing / normalizing / Tempering
    Rukunin Daraja: 10, 12CrMo, 15CrMo, 07Crl9Nil0, da dai sauransu Diamita na waje (Zagaye): 10 - 1000 mm
    Kauri: 1-100 mm Aikace-aikacen: bututun musayar zafi
    Diamita na waje (Zagaye): 10 - 1000 mm Jiyya na saman: Kamar yadda Buƙatun Abokin ciniki
    Tsawon: Kafaffen tsayi ko tsayin bazuwar Fasaha: Hot Rolled
    Siffar Sashe: Zagaye Bututu na Musamman: Bututun bango mai kauri
    Wurin Asalin: China Amfani: bututun musayar zafi
    Takaddun shaida: ISO9001:2008 Gwajin: UT/MT

    Aikace-aikace

    Bututun ƙarfe mara ƙarfi don fashewar mai suna aiki da bututun ƙarfe maras kyau don bututun murhu, bututun musayar zafi da bututun matsa lamba a masana'antar petrochemical.

    High quality carbon tsarin karfe maki ne 20g, 20mng da 25mng.
    Alloy tsarin karfe maki: 15mog, 20mog, 12 crmog
    15CrMoG, 12Cr2MoG, 12CrMoVG, da dai sauransu

    Babban Daraja

    Matsayin ƙarfe mai inganci mai inganci: 10#,20#

    High quality carbon tsarin karfe maki: 20g, 20mng da 25mng

    Alloy tsarin karfe maki: 15mog, 20mog, 12CRmog, 15CrMoG, 12Cr2MoG, da dai sauransu

    Abubuwan Sinadari

    No Daraja Sinadarin %
    C Si Mn Cr Mo Ni Nb Ti V Cu P S
    ≤
    Karfe Tsarin Tsarin Carbon Ingancin 10 0.07-0.13 0.17-0. 37 0.35-0.65 <0.15 <0.15 <0. 25 - - <0. 08 <0. 20 0.025 0. 015
    20 0.17-0. 23 0.17-0. 37 0.35-0.65 <0. 25 <0.15 <0. 25 - - <0. 08 <0. 20 0.025 0. 015
    Alloy Structural Karfe 12CrMo 0.08-0.15 0.17-0.37 0.40-0. 70 0.40-0. 70 0. 40 - 0.55 <0. 30 - - 一 <0. 20 0.025 0. 015
    15CrMo 0.12-0.18 0.17-0. 37 0.40 - 0. 70 0. 80-1.1 0. 40-0.55 <0. 30 - - 一 <0. 20 0.025 0. 015
    12CrlMo 0.08-0.15 0.50-1. 00 0. 30-0.6 1.00-1. 50 0.45-0.65 <0. 30 - - - <0, 20 0.025 0. 015
    12CrlMoV 0.08-0.15 0.17-0. 37 0.40-0. 70 0.90-1.2 0.25-0.35 <0. 30 - - 0.15-0. 30 <0. 20 0.025 0. 010
    12Cr2Mo 0.08-0.15 <0. 50 0.40-0. 60 2. 00-2. 50 0. 90-1.13 <0. 30 - - 一 <0. 20 0.025 0. 015
    12Cr5MoI <0.15 <0. 50 0.30-0.6 4. 00-6 0.45-0. 60 <0. 60   - - <0. 20 0.025 0. 015
    12Cr5MoNT
    12Cr9MoI <0.15 0. 25-1. 00 0.30-0. 60 8.00 - 10. 00 0. 90-1.1 <0. 60 - - - <0. 20 0.025 0, 015
    12Cr9MoNT
    Bakin Karfe Resistant Heat 07Crl9Nil0 0.04-0.1 <1. 00 <2. 00 18. 00-20. 00 - 8. 00-11 - - - - 0.030 0. 015
    07Crl8NillNb 0.04-0.1 <1. 00 <2. 00 17. 00-19. 00 - 9.00-12. 00 8C-1.1 - - - 0.030 0. 015
    07Crl9NillTi 0.04-0.1 <0. 75 <2. 00 17.00-20. 00 - 9. 00-13. 00 - 4C-0. 60 一 一 0.03 0. 015
    022Crl7Nil2Mo2 <0. 030 <1. 00 <2. 00 16. 00-18. 00 2. 00-3. 00 10.00-14. 00 - 一 一 - 0.03 0. 015

    Kayan Injiniya

    A'a Tashin hankali
    MPa    		 yawa
    MPa    		 Tsawon bayan karaya A/% Ƙarfin shayarwar girgiza kv2/j Lambar taurin Brinell
    hoto transver hoto transver
    ba kasa da ba fiye da
    10 335 ~ 475 205 25 23 40 27  
    20 410-550 245 24 22 40 27  
    12CrMo 410 ~ 560 205 21 19 40 27 156 HBW
    15CrMo 440 ~ 640 295 21 19 40 27 170 HBW
    12CrlMo 415 ~ 560 205 22 20 40 27 163 HBW
    12CrlMoV 470 ~ 640 255 21 19 40 27 179 HBW
    12Cr2Mo 450-600 280 22 20 40 27 163 HBW
    12Cr5MoI 415-590 205 22 20 40 27 163 HBW
    12Cr5MoNT 480 ~ 640 280 20 18 40 27 -
    12Cr9MoI 460 ~ 640 210 20 18 40 27 179 HBW
    12Cr9MoNT 590-740 390 18 16 40 27  
    O7Crl9NilO 2520 205 35     187 HBW
    07Crl8NillNb >520 205 35   - 187 HBW
    07Crl9NillTi >520 205 35 - - 187 HBW
    022Crl7Nil2Mo2 >485 170 35 一 - 187 HBW
    Don karfe tare da kaurin bango ƙasa da bututun 5mm kar a yi gwajin taurin

     

    Bukatar Gwaji

    Gwajin hydraulic
    Za a yi gwajin hydraulic don bututun ƙarfe ɗaya bayan ɗaya. Matsakaicin gwajin gwajin shine 20 MPa. A ƙarƙashin gwajin gwajin, lokacin tabbatarwa ba zai zama ƙasa da 10 s ba, kuma ba a yarda da zubar da bututun ƙarfe ba.
    Gwajin lallashi
    Za a gudanar da gwajin ƙwanƙwasa don bututun ƙarfe tare da diamita na waje fiye da 22 mm
    Gwajin walƙiya
    High quality carbon tsarin karfe da bakin (zafi-resistant) karfe bututu tare da waje diamita ba fiye da 76 mm da wani bango kauri da ba fiye da 8 mm za su kasance batun faɗaɗa gwaji. Za a gudanar da gwajin walƙiya a cikin ɗaki. A m diamita flaring kudi na samfurin bayan saman core taper ne 60% na flaring zai hadu da bukatun da tebur 7. Babu fasa ko fasa da aka yarda a kan samfurin bayan flaring. Dangane da buƙatun mai buƙata kuma an lura da su a cikin kwangilar, ana iya amfani da ƙirar ƙirar ƙarfe don faɗaɗa gwaji.
    Gwajin mara lalacewa
    The karfe bututu za su kasance ƙarƙashin ultrasonic flaw ganewa daya bayan daya daidai da tanadi na GB / T 5777-2008. Dangane da bukatun mai buƙata, ana iya ƙara wasu gwaje-gwaje marasa lalacewa bayan tattaunawa tsakanin mai siyarwa da mai buƙata kuma an nuna su a cikin kwangilar.
    Gwajin lalatawar intergranular
    Za a gudanar da gwajin lalatawar intergranular don bututun ƙarfe (mai jure zafi). Hanyar gwajin za ta kasance daidai da tanadin hanyar Sinanci E a cikin GB / T 4334-2008, kuma ba a ba da izinin lalata halayen intergranular bayan gwajin ba.
    Bayan tattaunawa tsakanin mai kaya da mai nema, kuma an lura a cikin kwangilar, mai nema zai iya tsara wasu hanyoyin gwajin lalata.

    Cikakken Bayani

    inji/Chemical&Taki Bututu

    GB/T8162-2008

    ASTM_A519-2006

    TS EN 10210-1-2006

    Saukewa: ASTM A53A53M-2012

    GB9948-2006

    GB6479-2013

    GB/T 17396-2009

  • Na baya:
  • Na gaba:

    • Oil, petrochemical, babban matsa lamba tukunyar jirgi, musamman amfani da sumul tube tukunyar jirgi sumul tube, geological sumul karfe tube da mai sumul tube.

    Abubuwan Sinadari

    iri Abubuwan Sinadari (%)
      C Mn Si Cr Mo Ni Nb+Ta S P
    15CrMo 0.12 ~ 0.18 0.40 ~ 0.70 0.17 ~ 0.37 0.80 ~ 1.10 0.40 ~ 0.55 ≤0.30 _ ≤0.035 ≤0.035

    Kayan Injiniya

    iri Tashin hankali
    MPa    		 yawa
    MPa    		 Tsawaitawa (%)
    15CrMo 440-640 295 22

    mmexport1652670379253.jpg

    Ku rubuta sakonku anan ku aiko mana
    Danna shiga don bincika ko ESC don rufewa