English
中中

Sinis Subtilitas Steel Seamless Tube Mechanica Pipe Gravis Wall Crassitudo Steel Pipe

Sina Subtilitas Steel Seamless Tube Mechanica Pipe Gravis Wall Crassitudo Steel Pipe Featured Image
  • Sinis Subtilitas Steel Seamless Tube Mechanica Pipe Gravis Wall Crassitudo Steel Pipe
  • Sinis Subtilitas Steel Seamless Tube Mechanica Pipe Gravis Wall Crassitudo Steel Pipe
  • Sinis Subtilitas Steel Seamless Tube Mechanica Pipe Gravis Wall Crassitudo Steel Pipe

Brevis descriptio:

Tubulae ferro inconsutiles, fistulae carbonis et fistulae mechanicae admixtae, maxime mechanicae in ASTM A519-2006 Vulgata, fistulae mechanicae mixturae maxime includunt.

1018, 1026, 8620, 4130, 4140 etc.


  • Mercedem:30% depositum, 70% L/C vel B/L exemplum vel 100% L/C ad aspectum
  • Min.Order Quantitas:1 PC
  • Facultates copia:Annua 20000 Tons Inventarium de Ferro Pipe
  • Tempus ducere:7-14 dies, si in stirpe, 30-45 dies ad producendum
  • Stipare:Nigra evanescens, revellere convellere et pileum pro omnibus et singulis tibiis; OD infra 219mm opus est in fasciculo stipendii, et quilibet fasciculus non excedens 2 talenta.
    • Download as PDF

    Product Detail

    Product Tags

    Overview

    Nos mercaturam nostram et servicium melius retinemus et perficimus. Eodem tempore operam navamus operam ad investigationes et emendationes pro Mechanica Steel Pipe, utilitate industriarum administratione, negotium semper commissum est ad spem sustentandam ut in suis quisque industriis princeps mercatus fiat. Devoti semper nostrae missioni fundamentales sunt. Fuimus semper in acie cum clientibus servientibus, proposita pretii administratione creandi et sinceritati, dedicationis, assidui administrationis notioni adhaerentes.

    Applicationem

    Maxime adhibetur ad mechanica et ad cylindros gasi faciendos. Includunt carbonem et mixturam ferro inconsutilem mechanicam Tubingam, et tegit utrumque inconsutilem calidum-perfectum mechanica Tubing et inconsutilem frigidum-perfectum mechanica Tubing in magnitudinibus usque ad 12 3/4 in. (323.8 mm) extra diametrum pro tubulis rotundis cum parietibus crassitudinibus necessariis.

    Principalis Gradus

    1018,1026,8620,4130,4140

    Chemical Component

    TABLE 1 Chemical Requirements of Low-Carbon Steels

    Gradus Chemical Compositio limites, %
    Designatio CarbonA ManganeseB Phosphorus;B Sulphur,B
    max max
    MT X 1015 0.10-0.20 0.60-0.90 0.04 0.05
    MT 1010 0.05-0.15 0.30-0.60 0.04 0.05
    MT 1015 0.10-0.20 0.30-0.60 0.04 0.05
    MT 1020 0.15-0.25 0.30-0.60 0.04 0.05
    MT X 1020 0.15-0.25 0.70-1.00 0.04 0.05

    BTermini applicandi ad calefactionem analysis; nisi secundum 6.1, analyses productas subiciuntur applicabilibus toleranciis quae in Tabula 5 data sunt.

    Tabella 2 Requisita chemica alia Carbon Steels

    Gradus

    Chemical Compositio limites, %A

    Designatio

    Carbon

    Manganese

    Phosphorus;

    Sulphur,

    max

    max

    1008

    0.10 max

    0.30-0.50

    0.041

    0.041

    1010

    0.08-0.13

    0.30-0.60

    0.041

    0.041

    1012

    0.10-0.15

    0.30-0.60

    0.041

    0.041

    1015

    0.13-0.18

    0.30-0.60

    0.041

    0.041

    1016

    0.13-0.18

    0.60-0.90

    0.041

    0.041

    1017

    0.15-0.20

    0.30-0.60

    0.041

    0.041

    MXVIII

    0.15-0.20

    0.60-0.90

    0.041

    0.041

    1019

    0.15-0.20

    0.70-1.00

    0.041

    0.041

    1020

    0.18–0.23

    0.30-0.60

    0.041

    0.041

    1021

    0.18–0.23

    0.60-0.90

    0.041

    0.041

    1022

    0.18–0.23

    0.70-1.00

    0.041

    0.041

    1025

    0.22–0.28

    0.30-0.60

    0.041

    0.041

    1026

    0.22–0.28

    0.60-0.90

    0.041

    0.041

    1030

    0.28-0.34

    0.60-0.90

    0.041

    0.041

    1035

    0.32-0.38

    0.60-0.90

    0.041

    0.041

    1040

    0.37–0.44

    0.60-0.90

    0.041

    0.041

    1045

    0.43-0.50

    0.60-0.90

    0.041

    0.041

    1050

    0.48–0.55

    0.60-0.90

    0.041

    0.041

    1518

    0.15-0.21

    1.10-1.40

    0.041

    0.041

    1524

    0.19–0.25

    1.35-1.65

    0.041

    0.041

    1541

    0.36–0.44

    1.35-1.65

    0.041

    0.041

    Circumscriptiones et limites in hac tabula datos applicant ad analysim caloris; nisi quod erat faciendum6.1analyses ductae subiciuntur applicabilibus adiectis patientibus datis in Tabula Numeri 5 .

    TABLE III Chemical Requisita ad Alloy Steels

    NOTA

    1 — Circumscriptiones et limites in hac tabula applicant ferro non excedentes 200 in.2(1290 cm .)2) In area crucis-Lorem.

    NOTA

    2 — Copiae quarundam elementorum in offensionibus ferris insunt, quae nec specificantur nec requiruntur. Haec elementa considerantur ut accidens

    et his maximis ponderis adesse potest: aeris, 0,35%; nickel, 0.25%; chromium 0.20%; molybdenum, 0.10%.

    NOTA

    3 — Circumscriptiones et limites in hac tabula datos applicant ad analysim caloris; nisi quod erat faciendum6.1, productum analyses subsunt applicabili

    additae tolerantiae in Tabula Number V datae.

     

    GradusA,B Chemical Compositio limites, %
    Designa-
    Carbon Manganese Phospho- Sulphur,C,D Pii Nickel Chromium Molybde-
    tio
    rus,Cmax max num
    1330 0.28-0.33 1.60-1.90 0.04 0.04 0.15-0.35 ... ... ...
    1335 0.33-0.38 1.60-1.90 0.04 0.04 0.15-0.35 ... ... ...
    1340 0.38–0.43 1.60-1.90 0.04 0.04 0.15-0.35 ... ... ...
    1345 0.43-0.48 1.60-1.90 0.04 0.04 0.15-0.35 ... ... ...
    3140 0.38–0.43 0.70-0.90 0.04 0.04 0.15-0.35 1.10-1.40 0.55-0.75 ...
    E3310 0.08-0.13 0.45-0.60 0.024 0.024 0.15-0.35 3.25–3.75 1.40-1.75 ...
    4012 0.09-0.14 0.75-1.00 0.04 0.04 0.15-0.35 ... ... 0.15-0.25
    4023 0.20–0.25 0.70-0.90 0.04 0.04 0.15-0.35 ... ... 0.20-0.30
    4024 0.20–0.25 0.70-0.90 0.04 0.035−0.050 0.15-0.35 ... ... 0.20-0.30
    4027 0.25–0.30 0.70-0.90 0.04 0.04 0.15-0.35 ... ... 0.20-0.30
    4028 0.25–0.30 0.70-0.90 0.04 0.035−0.050 0.15-0.35 ... ... 0.20-0.30
    4037 0.35-0.40 0.70-0.90 0.04 0.04 0.15-0.35 ... ... 0.20-0.30
    4042 0.40-0.45 0.70-0.90 0.04 0.04 0.15-0.35 ... ... 0.20-0.30
    4047 0.45-0.50 0.70-0.90 0.04 0.04 0.15-0.35 ... ... 0.20-0.30
    4063 0.60-0.67 0.75-1.00 0.04 0.04 0.15-0.35 ... ... 0.20-0.30
    4118 0.18–0.23 0.70-0.90 0.04 0.04 0.15-0.35 ... 0.40-0.60 0.08-0.15
    4130 0.28-0.33 0.40-0.60 0.04 0.04 0.15-0.35 ... 0.80-1.10 0.15-0.25
    4135 0.32-0.39 0.65-0.95 0.04 0.04 0.15-0.35 ... 0.80-1.10 0.15-0.25
    4137 0.35-0.40 0.70-0.90 0.04 0.04 0.15-0.35 ... 0.80-1.10 0.15-0.25
    4140 0.38–0.43 0.75-1.00 0.04 0.04 0.15-0.35 ... 0.80-1.10 0.15-0.25
    4142 0.40-0.45 0.75-1.00 0.04 0.04 0.15-0.35 ... 0.80-1.10 0.15-0.25
    (IV) CXLV 0.43-0.48 0.75-1.00 0.04 0.04 0.15-0.35 ... 0.80-1.10 0.15-0.25
    4147 0.45-0.50 0.75-1.00 0.04 0.04 0.15-0.35 ... 0.80-1.10 0.15-0.25
    4150 0.48-0.53 0.75-1.00 0.04 0.04 0.15-0.35 ... 0.80-1.10 0.15-0.25
    4320 0.17–0.22 0.45-0.65 0.04 0.04 0.15-0.35 1.65–2.00 0.40-0.60 0.20-0.30
    4337 0.35-0.40 0.60-0.80 0.04 0.04 0.15-0.35 1.65–2.00 0.70-0.90 0.20-0.30
    E4337 0.35-0.40 0.65-0.85 0.024 0.024 0.15-0.35 1.65–2.00 0.70-0.90 0.20-0.30
    4340 0.38–0.43 0.60-0.80 0.04 0.04 0.15-0.35 1.65–2.00 0.70-0.90 0.20-0.30
    E4340 0.38–0.43 0.65-0.85 0.024 0.024 0.15-0.35 1.65–2.00 0.70-0.90 0.20-0.30
    4422 0.20–0.25 0.70-0.90 0.04 0.04 0.15-0.35 ... ... 0.35-0.45
    4427 0.24-0.29 0.70-0.90 0.04 0.04 0.15-0.35 ... ... 0.35-0.45
    4520 0.18–0.23 0.45-0.65 0.04 0.04 0.15-0.35 ... ... 0.45-0.60
    4615 0.13-0.18 0.45-0.65 0.04 0.04 0.15-0.35 1.65–2.00 ... 0.20-0.30
    4617 0.15-0.20 0.45-0.65 0.04 0.04 0.15-0.35 1.65–2.00 ... 0.20-0.30
    4620 0.17–0.22 0.45-0.65 0.04 0.04 0.15-0.35 1.65–2.00 ... 0.20-0.30
    4621 0.18–0.23 0.70-0.90 0.04 0.04 0.15-0.35 1.65–2.00 ... 0.20-0.30
    4718 0.16-0.21 0.70-0.90 0.04 0.04 0.15-0.35 0.90-1.20 0.35-0.55 0.30-0.40
    4720 0.17–0.22 0.50-0.70 0.04 0.04 0.15-0.35 0.90-1.20 0.35-0.55 0.15-0.25
    4815 0.13-0.18 0.40-0.60 0.04 0.04 0.15-0.35 3.25–3.75 ... 0.20-0.30
    4817 0.15-0.20 0.40-0.60 0.04 0.04 0.15-0.35 3.25–3.75 ... 0.20-0.30
    4820 0.18–0.23 0.50-0.70 0.04 0.04 0.15-0.35 3.25–3.75 ... 0.20-0.30
    5015 0.12–0.17 0.30-0.50 0.04 0.04 0.15-0.35 ... 0.30-0.50 ...
    5046 0.43-0.50 0.75-1.00 0.04 0.04 0.15-0.35 ... 0.20-0.35 ...
    5115 0.13-0.18 0.70-0.90 0.04 0.04 0.15-0.35 ... 0.70-0.90 ...
    5120 0.17–0.22 0.70-0.90 0.04 0.04 0.15-0.35 ... 0.70-0.90 ...
    5130 0.28-0.33 0.70-0.90 0.04 0.04 0.15-0.35 ... 0.80-1.10 ...
    5132 0.30-0.35 0.60-0.80 0.04 0.04 0.15-0.35 ... 0.75-1.00 ...
    5135 0.33-0.38 0.60-0.80 0.04 0.04 0.15-0.35 ... 0.80-1.05 ...
    5140 0.38–0.43 0.70-0.90 0.04 0.04 0.15-0.35 ... 0.70-0.90 ...
    5145 0.43-0.48 0.70-0.90 0.04 0.04 0.15-0.35 ... 0.70-0.90 ...
    5147 0.46-0.51 0.70-0.95 0.04 0.04 0.15-0.35 ... 0.85–1.15 ...
    5150 0.48-0.53 0.70-0.90 0.04 0.04 0.15-0.35 ... 0.70-0.90 ...
    5155 0.51-0.59 0.70-0.90 0.04 0.04 0.15-0.35 ... 0.70-0.90 ...
    5160 0.56–0.64 0.75-1.00 0.04 0.04 0.15-0.35 ... 0.70-0.90 ...
    52100E 0.93-1.05 0.25-0.45 0.024 0.014 0.15-0.35 0.25 max 1.35-1.60 0.10 max
    E50100 0.98-1.10 0.25-0.45 0.024 0.024 0.15-0.35 ... 0.40-0.60 ...
    E51100 0.98-1.10 0.25-0.45 0.024 0.024 0.15-0.35 ... 0.90-1.15 ...
    E52100 0.98-1.10 0.25-0.45 0.024 0.024 0.15-0.35 ... 1.30-1.60 ...
    Vanadium
    6118 0.16-0.21 0.50-0.70 0.04 0.04 0.15-0.35 ... 0.50-0.70 0.10-0.15
    6120 0.17–0.22 0.70-0.90 0.04 0.04 0.15-0.35 ... 0.70-0.90 0.10 min
    6150 0.48-0.53 0.70-0.90 0.04 0.04 0.15-0.35 ... 0.80-1.10 0.15 min
    aluminium Molybdenum
    E7140 0.38–0.43 0.50-0.70 0.024 0.024 0.15-0.40 0.95–1.30 1.40-1.80 0.30-0.40
    Nickel
    8115 0.13-0.18 0.70-0.90 0.04 0.04 0.15-0.35 0.20-0.40 0.30-0.50 0.08-0.15
    8615 0.13-0.18 0.70-0.90 0.04 0.04 0.15-0.35 0.40-0.70 0.40-0.60 0.15-0.25
    8617 0.15-0.20 0.70-0.90 0.04 0.04 0.15-0.35 0.40-0.70 0.40-0.60 0.15-0.25
    8620 0.18–0.23 0.70-0.90 0.04 0.04 0.15-0.35 0.40-0.70 0.40-0.60 0.15-0.25
    8622 0.20–0.25 0.70-0.90 0.04 0.04 0.15-0.35 0.40-0.70 0.40-0.60 0.15-0.25
    8625 0.23-0.28 0.70-0.90 0.04 0.04 0.15-0.35 0.40-0.70 0.40-0.60 0.15-0.25
    8627 0.25–0.30 0.70-0.90 0.04 0.04 0.15-0.35 0.40-0.70 0.40-0.60 0.15-0.25
    8630 0.28-0.33 0.70-0.90 0.04 0.04 0.15-0.35 0.40-0.70 0.40-0.60 0.15-0.25
    8637 0.35-0.40 0.75-1.00 0.04 0.04 0.15-0.35 0.40-0.70 0.40-0.60 0.15-0.25
    8640 0.38–0.43 0.75-1.00 0.04 0.04 0.15-0.35 0.40-0.70 0.40-0.60 0.15-0.25
    8642 0.40-0.45 0.75-1.00 0.04 0.04 0.15-0.35 0.40-0.70 0.40-0.60 0.15-0.25
    8645 0.43-0.48 0.75-1.00 0.04 0.04 0.15-0.35 0.40-0.70 0.40-0.60 0.15-0.25
    8650 0.48-0.53 0.75-1.00 0.04 0.04 0.15-0.35 0.40-0.70 0.40-0.60 0.15-0.25
    8655 0.51-0.59 0.75-1.00 0.04 0.04 0.15-0.35 0.40-0.70 0.40-0.60 0.15-0.25
    8660 0.55-0.65 0.75-1.00 0.04 0.04 0.15-0.35 0.40-0.70 0.40-0.60 0.15-0.25
    8720 0.18–0.23 0.70-0.90 0.04 0.04 0.15-0.35 0.40-0.70 0.40-0.60 0.20-0.30
    8735 0.33-0.38 0.75-1.00 0.04 0.04 0.15-0.35 0.40-0.70 0.40-0.60 0.20-0.30
    8740 0.38–0.43 0.75-1.00 0.04 0.04 0.15-0.35 0.40-0.70 0.40-0.60 0.20-0.30
    8742 0.40-0.45 0.75-1.00 0.04 0.04 0.15-0.35 0.40-0.70 0.40-0.60 0.20-0.30
    8822 0.20–0.25 0.75-1.00 0.04 0.04 0.15-0.35 0.40-0.70 0.40-0.60 0.30-0.40
    9255 0.51-0.59 0.60-0.80 0.04 0.04 1.80–2.20 ... 0.60-0.80 ...
    9260 0.56–0.64 0.75-1.00 0.04 0.04 1.80–2.20 ... ... ...
    9262 0.55-0.65 0.75-1.00 0.04 0.04 1.80–2.20 ... 0.25–0.40 ...
    E9310 0.08-0.13 0.45-0.65 0.024 0.024 0.15-0.35 3.00–3.50 1.00-1.40 0.08-0.15
    9840 0.38–0.42 0.70-0.90 0.04 0.04 0.15-0.35 0.85–1.15 0.70-0.90 0.20-0.30
    9850 0.48-0.53 0.70-0.90 0.04 0.04 0.15-0.35 0.85–1.15 0.70-0.90 0.20-0.30
    50B40 0.38–0.42 0.75-1.00 0.04 0.04 0.15-0.35 ... 0.40-0.60 ...
    50B44 0.43-0.48 0.75-1.00 0.04 0.04 0.15-0.35 ... 0.40-0.60 ...
    50B46 0.43-0.50 0.75-1.00 0.04 0.04 0.15-0.35 ... 0.20-0.35 ...
    50B50 0.48-0.53 0.74–1.00 0.04 0.04 0.15-0.35 ... 0.40-0.60 ...
    50B60 0.55-0.65 0.75-1.00 0.04 0.04 0.15-0.35 ... 0.40-0.60 ...
    51B60 0.56–0.64 0.75-1.00 0.04 0.04 0.15-0.35 ... 0.70-0.90 ...
    81B45 0.43-0.48 0.75-1.00 0.04 0.04 0.15-0.35 0.20-0.40 0.35-0.55 0.08-0.15
    86B45 0.43-0.48 0.75-1.00 0.04 0.04 0.15-0.35 0.40-0.70 0.40-0.60 0.15-0.25
    94B15 0.13-0.18 0.75-1.00 0.04 0.04 0.15-0.35 0.30-0.60 0.30-0.50 0.08-0.15
    94B17 0.15-0.20 0.75-1.00 0.04 0.04 0.15-0.35 0.30-0.60 0.30-0.50 0.08-0.15
    94B30 0.28-0.33 0.75-1.00 0.04 0.04 0.15-0.35 0.30-0.60 0.30-0.50 0.08-0.15
    94B40 0.38–0.43 0.75-1.00 0.04 0.04 0.15-0.35 0.30-0.60 0.30-0.50 0.08-0.15

    B Gradus in hac tabula cum littera B, qualia 50B40 ostensi, expectari possunt 0.0005% minimum boron imperium habere. AGradus in hac tabula cum praepositione litterae E ostensae plerumque per processum fornacem fundamentalem-electrico fabricantur. Cetera omnia normaliter per processum focialem basic-patens fabricari possunt, sed per processum electrico-furnacum fundamentali cum adaptationibus in phosphoro et sulphure confici possunt.

     

    CLimitationes phosphori sulphuris in singulis processibus sunt hae;

    Basic fornax electrica 0.025 max % Acidula fornax electrica 0.050 max %

    Acidi focum apertum 0.040 max % Acidulum focum apertum 0.050 max %

    D Minimum et maximum contentus sulphuris ferros resulfurizatas indicat.

    EEmptor haec maxima ponderis potest nominare: aeris, 0,30%; aluminium, 0.050%; et dolor, 0.0015%.

     

    Mechanica Property

    Typical Tensile Properties, Hardness and Thermal Condition for some of more Common Grades of Carbon and Alloy Steels

     

     

    CW-Cold Operatus SR-Stus Sublevatus A-Annealed N NormalizedA Haec sunt symbola definitiones pro variis conditionibus: HR-Hot Rolle

    Gradus Condi- Ultima Cede Prolongatio Rockwell,
    Desig- tioA Fortitudo, Fortitudo, in 2 in. or * duritia
    gens 50 mm, % B Scale
    ksi MPa ksi MPa
    1020 HR 50 345 32 221 25 55
    CW 70 483 60 414 5 75
    SR 65 448 50 345 10 72
    A 48 331 28 193 30 50
    N 55 379 34 234 22 60
    1025 HR 55 379 35 241 25 60
    CW 75 517 65 448 5 80
    SR 70 483 55 379 8 75
    A 53 365 30 207 25 57
    N 55 379 36 248 22 60
    1035 HR 65 448 40 276 20 72
    CW 85 586 75 517 5 88
    SR 75 517 65 448 8 80
    A 60 414 33 228 25 67
    N 65 448 40 276 20 72
    1045 HR 75 517 45 310 15 80
    CW 90 621 80 552 5 90
    SR 80 552 70 483 8 85
    A 65 448 35 241 20 72
    N 75 517 48 331 15 80
    1050 HR 80 552 50 345 10 85
    SR 82 565 70 483 6 86
    A 68 469 38 262 18 74
    N 78 538 50 345 12 82
    1118 HR 50 345 35 241 25 55
    CW 75 517 60 414 5 80
    SR 70 483 55 379 8 75
    A 50 345 30 207 25 55
    N 55 379 35 241 20 60
    1137 HR 70 483 40 276 20 75
    CW 80 552 65 448 5 85
    SR 75 517 60 414 8 80
    A 65 448 35 241 22 72
    N 70 483 43 296 15 75
    4130 HR 90 621 70 483 20 89
    SR 105 724 85 586 10 95
    A 75 517 55 379 30 81
    N 90 621 60 414 20 89
    4140 HR 120 855 90 621 15 100
    SR 120 855 100 689 10 100
    A 80 552 60 414 25 85
    N 120 855 90 621 20 100

    d

    tolerantia

    Diameter extra tolerances in Tubing-Calida circumA,B,C

     

    Extra Diameter Location Range, Extra diametri tolerantia, m.
    in. (mm)

    Plus

    Sub
    Usque ad 2.999 (76.17)

    0.00 (0.51)

    0.00 (0.51)
    3.000–4.499 (76.20–114.27)

    0.024 (0.64)

    0.024 (0.64)
    4.500–5.999 (114.30-152.37)

    0.031 (0.79)

    0.031 (0.79)
    6.000–7.499 (152.40-190.47)

    0.038 (0.94)

    0.038 (0.94)
    7.500–8.999 (190.50–228.57)

    0.041 (1.14)

    0.041 (1.14)
    9.000–10.750 (228.60-273.05)

    0.041 (1.27)

    0.041 (1.27)

     

    Patientiae diametri non applicandae sunt conditionibus normalizatis et temperatis vel extinctis et temperatis.

    B Communis range magnitudinum calidis tubis perfecti est 11⁄2 in. (38.1 mm) ad 103⁄4 ​​in (273.0 mm) crassitudine parietis extra diametrum cum diametro saltem 3% vel plus, sed non minus quam 0.095 in.

    C Maiores magnitudinis in promptu sunt; consulere fabrica magnitudinis et tolerantiae.

     

    Murus Crassitudo tolerantiae ad circum Hot-Finished

    Tubing

     

     

    Murus Crassitudo

    Muri Crassitudo Tolerantia;Apercent Plus
    Ut range sentio

    et sub nominali
    de foris

    Foris

    Foris

    Foris
    Diameter

    Diameter

    Diameter

    Diameter

    2.999 in.

    3.000 in.

    6.000 in.

    (76.19 mm)

    (76.20 mm)

    (152.40 mm)

    et minor

    ad 5.999 in.

    ad 10.750 in.

    (152.37 mm)

    (273.05 mm)
    Sub 15

    12.5

    10.0

    10.0
    XV et supra

    10.0

    7.5

    10.0

    Crassitudo parietis tolerantiae ad parietes 0,199 in. (5.05 mm) et minus applicari non potest; consulere fabricam sustinentiae parietis in talibus tubulis magnitudinum.
    dimensio maioris momenti, deinde Tubing-frigida operata debet dari intra diametrum et parietem crassitudinis vel extra diametrum et intra diametrum.
    Aspera Tubing Mechanica - Variatio extra diametri et parietis crassitudinem tolerantiam in Tabula non excedunt. Mensa tegit tolerantias ad crassitudinem parietis extra diametrum applicata et ad magnitudinem determinatam applicata.
    Humus Mechanica Tubing-Variatio extra diameterum tolerantias in Tabula non excedunt. Productum hoc ex tubo frigido operato normaliter producitur.
    Longitudines—Mechanicae Tubingae plerumque in molendinis longi- tudinibus, 5 ft (1,5 m) instructae sunt. Certae longitudinum incisae sunt, cum ab emptore specificatae. Longitudo tolerantiae in Tabula monstrantur.
    Rectitudo — Recta tolerantiae inconsutilem rotundum Tubingae quantitates in Tabula exhibitas non excedunt.

     

    Test opus est

    1.Hardness Test
    Cum duritiei limites exiguntur, consulatur fabrica. Duritiae typicae in Tabula recensentur. Cum denotatur, durities test in 1% fistularum peragetur.

    2. Tension Tests
    Cum distrahentes proprietates requirantur, fabrica consulatur. Typicalis possessiones distrahentes pro aliquibus gradibus communioribus et condicionibus thermarum in tabula recensentur.

    3.Nondestructive Test
    Variae rationes testium ultrasonicarum vel electromagneticorum non destructivorum praesto sunt. Probatio adhibenda et inspectio limitum a fabrica et emptore conventione constituetur.

    4.Flaring Test
    Cum speciales requiruntur ad munditiem ferri, modi experimenti et limites acceptationis a fabrica et emptore conventione constituentur.

    Product Detail

    Mechanica/Chemica&Fertilizer Pipes


    GB/T8162-2008


    ASTM A519-2006


    BS EN 10210-1-2006


    ASTM A53/A53M-2012


    GB9948-2006


    GB6479-2013


    GB/T 17396-2009

  • Priora:
  • Next:
    • Epistulam tuam hic scribe et mitte nobis
    Intrare quaerere vel ESC claudere