GB/T5310-2017 Tuubbada aan xuduudda lahayn ee kuleyliyaha cadaadiska sare
Codsiga
Inta badan loo isticmaalo cadaadiska sare iyo adeega heerkulka sare ee kuleyliyaha (tuubo kululeeyaha, tuubada dib u kululeeyaha, tuubada hagaha hawada, tuubada ugu weyn ee kululeeyaha cadaadiska sare iyo ultra sare).Marka la eego ficilka gaaska qiiqa heerkulkiisu sarreeyo iyo uumiga biyaha, tuubada ayaa oxidized oo qudhmi doonta.Waxaa loo baahan yahay in tuubada birta ay leedahay adkeysi sare, iska caabin sare oo oksaydhka iyo daxalka, iyo xasilloonida qaabdhismeedka wanaagsan.
Fasalka ugu weyn
Fasalka birta qaabdhismeedka tayada sare leh: 20g, 20mng, 25mng
Fasalka birta qaab dhismeedka alloy: 15mog, 20mog, 12crmog, 15crmog, 12cr2mog, 12crmovg, 12cr3movsitib, iwm
Heerarka kala duwan waxaa jira Darajo kala duwan
GB5310: 20G = EN10216 P235GH
| Qalab | C | Si | Mn | P | S | Cr | MO | NI | Al | Cu | Ti | V |
| P235GH | ≤0.16 | ≤0.35 | ≤1.20 | ≤0.025 | ≤0.025 | ≤0.3 | ≤0.08 | ≤0.3 | ≤0.02 | ≤0.3 | ≤0.04 | ≤0.02 |
| 20G | 0.17-0.24 | 0.17-0.37 | 0.35-0.65 | ≤0.03 | ≤0.03 | - | - | - | - | - | - | - |
| Qalab | Xoogga Jilicsan | Wax-soo-saarka | Kordhinta |
| 20G | 410-550 | ≥245 | ≥24 |
| P235GH | 320-440 | 215-235 | 27 |
| 360-500 | 25 |
| Qalab | Tijaabi | ||||||
| 20G: | fidsan | Haydarooliga | Tijaabada Saamaynta | NDT | Eddy | Cabbirka Grazin | Qaab dhismeedka yar yar |
| P235GH | fidsan | Haydarooliga | Tijaabada Saamaynta | NDT | Electromagnetic | Baaxadda balaadhinta | Cidhiidhiga daadanaya |
Dulqaad
Dhumucda gidaarka iyo dhexroorka dibadda:
Haddii aysan jirin shuruudo gaar ah, tuubooyinku waxa ay noqonayaan sida dhexroorka caadiga ah iyo dhumucda gidaarka caadiga ah.Sida xaashida soo socota
| Kala saarista | Habka wax-soo-saarka | Cabbirka tuubada | Dulqaad | |||
| Darajada caadiga ah | Darajo sare | |||||
| WH | Hot Rolled (extrude) tuubo | Dhexroorka dibadda ee caadiga ah (D) | <57 | 士 0.40 | ±0,30 | |
| 57 〜325 | SW35 | ±0.75%D | ±0.5%D | |||
| S>35 | ±1%D | ±0.75%D | ||||
| >325-6. | + 1%D ama + 5. Qaado mid ka yar 一2 | |||||
| >600 | + 1%D ama + 7, qaado mid ka yar 一2 | |||||
| Dhumucda darbiga caadiga ah (S) | <4.0 | ±|・丨） | ±0.35 | |||
| >4.0-20 | + 12.5% S | ± 10% S | ||||
| >20 | DV219 | ± 10% S | ± 7.5% S | |||
| 心219 | + 12.5% S -10% S | 土10% S | ||||
| WH | Dhuumaha balaadhinta kulaylka | Dhexroorka dibadda ee caadiga ah (D) | dhammaan | ±1%D | ± 0.75% |
| Dhumucda darbiga caadiga ah (S) | dhammaan | + 20% S -10% S | + 15% S -io%s | ||
| WC | Qabow la sawiray (duubay) Ppipe | Dhexroorka dibadda ee caadiga ah (D) | <25.4 | ±'L1j | - |
| >25.4 〜4 () | ±0.20 | ||||
| >40 〜50 | |:0.25 | - | |||
| >50 〜60 | ±0.30 | ||||
| >60 | ±0.5%D | ||||
| Dhumucda darbiga caadiga ah (S) | <3.0 | ±0.3 | ±0.2 | ||
| >3.0 | S | ± 7.5% S |
Dhererka:
Dhererka caadiga ah ee tuubooyinka birta waa 4 000 mm ~ 12 000 mm.Ka dib markii la tashaday alaab-qeybiyaha iyo iibsadaha, oo buuxi qandaraaska, waxaa la geyn karaa tuubooyinka birta oo dhererkoodu ka weyn yahay 12 000 mm ama ka gaaban I 000 mm laakiin aan ka gaabanayn 3 000 mm;dhererka gaaban Tirada tuubooyinka birta ee ka yar 4,000 mm laakiin aan ka yarayn 3,000 mm waa in aanay ka badnayn 5% tirada guud ee tuubooyinka birta ee la keenay.
Miisaanka gaarsiinta:
Marka tuubada birta la keeno iyadoo loo eegayo dhexroorka dibadda ee magaca iyo dhumucda derbiga magacaaban ama dhexroorka gudaha iyo dhumucda derbiga magacaaban, tuubada birta waxaa la geeyaa iyadoo loo eegayo miisaanka dhabta ah.Waxa kale oo lagu geyn karaa iyadoo loo eegayo miisaanka aragtida.
Marka tuubada birta la keeno iyadoo loo eegayo dhexroorka sare ee magaca iyo dhumucda gidaarka ugu yar, tuubada birta waxaa la geeyaa iyadoo loo eegayo miisaanka dhabta ah;dhinacyada saadka iyo baahida ayaa ka wada xaajooda.Waxaana lagu tilmaamay heshiiska.Dhuumaha birta sidoo kale waxaa lagu geyn karaa iyadoo loo eegayo miisaanka aragtida.
U dulqaadashada miisaanka:
Marka loo eego shuruudaha iibsadaha, ka dib markii la tashaday alaab-qeybiyaha iyo iibsadaha, iyo qandaraaska, leexinta u dhaxaysa miisaanka dhabta ah iyo miisaanka aragtida ee tuubada birta bixinta waa inay buuxisaa shuruudaha soo socda:
a) Dhuumaha birta ah ee keliga ah: ± 10%;
b) Qayb kasta oo tuubooyinka birta ah oo leh cabbirka ugu yar ee 10 t: ± 7.5%.
Shuruudaha Imtixaanka
Tijaabada Biyo-baxa:
Dhuumaha birta waa in si biyo ah mid mid loo tijaabiyaa.Cadaadiska ugu badan ee tijaabada waa 20 MPa.Cadaadiska tijaabada, wakhtiga xasilinta waa inuusan ka yarayn 10 s, iyo tuubada birta ah waa inaysan daadin.
Ka dib marka isticmaaluhu ogolaado, tijaabada hydraulicka waxa lagu bedeli karaa tijaabinta hadda jirta ama tijaabada dheecaanka birlabeedka.
Tijaabada aan burburin:
Tuubooyinka u baahan baaris dheeraad ah waa in ultrasonically loo baaro mid mid.Ka dib markii gorgortanku u baahan yahay ogolaanshaha dhinaca oo lagu qeexay qandaraaska, imtixaano kale oo aan burburin ayaa lagu dari karaa.
Tijaabada fidsan:
Tuubooyinka leh dhexroorka dibadda ee ka weyn 22 mm waa in la mariyaa tijaabo simi ah.Ma jiro delamination muuqda, baro cad, ama wasakhdu waa inay dhacaan inta lagu jiro tijaabada oo dhan.
Tijaabada Daboolida
Marka loo eego shuruudaha iibsadaha oo lagu sheegay qandaraaska, tuubada birta ee leh dhexroorka dibadda ≤76mm iyo dhumucda derbiga ≤8mm waxaa lagu sameyn karaa tijaabin gubasho.Tijaabada waxaa lagu sameeyay heer kulka qolka iyadoo taper ah 60 °.Daboolida ka dib, heerka ololka ee dhexroorka dibadda waa inuu buuxiyaa shuruudaha miiska soo socda, iyo walxaha tijaabada ah waa inaysan muujin dildilaacyo ama dillaac.
| Nooca Birta
| Dhexroorka ka baxsan heerka gubanaya tuubada birta/% | ||
| Dhexroorka Gudaha/Dhererka | |||
| <0.6 | >0.6 〜0.8 | >0.8 | |
| Bir dhismeed kaarboon oo tayo sare leh | 10 | 12 | 17 |
| Bir daawaha qaab dhismeedka | 8 | 10 | 15 |
| • Dhexroorka gudaha waxaa loo xisaabiyaa shaybaarka. | |||
