English
中文

Qiimaha la dhimi karo ee China-Alloy Steel (Machanical and Hydraulic) Dhuumaha

Qiimaha la dhimi karo Shiinaha Bir-daawaha-hooseeya (Machanical and Hydraulic) Tubta Muujinaysa Sawirka
  • Qiimaha la dhimi karo ee China-Alloy Steel (Machanical and Hydraulic) Dhuumaha
  • Qiimaha la dhimi karo ee China-Alloy Steel (Machanical and Hydraulic) Dhuumaha
  • Qiimaha la dhimi karo ee China-Alloy Steel (Machanical and Hydraulic) Dhuumaha

Sharaxaad Gaaban:

Tuubooyinka birta ah ee aan kala go'a lahayn ee ujeedooyinka qaab dhismeedka, Tuubooyinka birta ah ee aan fiicnayn ee dhismayaasha farsamada ee GB/8162-2008 Standard. Waxyaabaha ay ka mid yihiin birta kaarboon tayada sare leh iyo birta daawaha hooseeya, sida 10,20,35,45 iyo Q345,Q460,Q490,42CrMo,35CrMo.


  • Lacag bixinta30% deebaaji, 70% L/C ama nuqul B/L ama 100% L/C marka la eego
  • Tirada Dalbashada Min.1 PC
  • Awooda wax bixinta:Sannadkii 20000 Tan ee Tubta Birta
  • Waqtiga Hogaaminta:7-14 maalmood haddii kaydka, 30-45 maalmood si loo soo saaro
  • Baakad:Baabi'inta Madow, gogosha iyo daboolka tuubo kasta; OD ka hooseeya 219mm waxay u baahan tahay in lagu xidho xidhmo, xidhmo kastana kama badna 2 tan.
    • U soo deji sidii PDF

    Faahfaahinta Alaabta

    Tags Product

    Dulmar

    Had iyo jeer u janjeedha macmiilka, waana yoolkayaga kama dambaysta ah si aan u helno kaliya ilaa hadda alaab-qeybiyaha ugu sumcadda badan, lagu kalsoon yahay oo daacadda ah, laakiin sidoo kale lamaanaha macaamiishayada ee Beebka-Alloy-hooseeya (Machanical iyo Hydraulic), Ku soo dhawoow inaad dhejiso muunaddaada iyo giraanta midabka si aan u soo saarno si waafaqsan qeexidaada. Soo dhawoow su'aashaada! Waxaan rajaynaynaa inaan kula dhisno wada shaqayn wakhti dheer ah! Shirkadeena waxay taageertaa ruuxa "hal-abuurnimo, wada noolaansho, shaqo kooxeed iyo wadaagis, dariiqyo, horumar la taaban karo". Nasii fursad oo waxaan caddayn doonaa awooddeena. Caawinaada naxariista leh, waxaan aaminsanahay inaan adiga kula abuuri karno mustaqbal ifaya.

    TS EN 10216-1 P235 waa walxo bir ah oo caadi ah. Sida caadiga ah, waxaa loo qaybiyaa laba darajo: TR1 iyo TR2. TR1 uma baahna daaweyn kulayl, halka TR2 ay u baahan tahay daaweyn caadi ah. TR2 waxay qiyaas ahaan u dhigantaa TR2 marka la eego ka kooban kiimikada, laakiin waxay u baahan tahay walxo dheeraad ah; TR1 iyo TR2 waa qiyaas ahaan u dhigma marka loo eego sifooyinka farsamada. Farqiga ayaa ah in TR1 uusan u baahnayn tijaabinta saameynta, halka TR2 ay u baahan tahay baaritaanka saameynta 0 ° C. Shuruudaha kormeerka ee tuubooyinka dhammayska tiran sidoo kale way ka duwan yihiin TR1 iyo TR2. TR1 kaliya waxay u baahan tahay kormeer joogto ah, halka TR2 ay u baahan tahay kormeer gaar ah (tijaabo saameyn dheeri ah).

    Haddii aysan jirin shuruud gaar ah, EN10216 P235 TR1 waa tan ugu badan ee la isticmaalo, oo la mid ah darajada birta Shiinaha GB/T8163 20# ama GB/t8162 Q235C, waana la isku beddeli karaa midba midka kale.

    Codsiga

    Waxaa inta badan loo adeegsadaa in lagu sameeyo birta qaab dhismeedka kaarboon, birta qaab dhismeedka Alloy iyo qaabdhismeedka farsamada.

    Fasalka ugu weyn

    Fasalka Birta Dhismaha Kaarboon: 10,20,35, 45,Q345,Q460,Q490,Q620,Iwm.

    Fasalka Dhismaha Birta Dhismaha Aloy: 42CrMo,35CrMo, iwm

    Qayb Kiimiko ah

    Heerka Birta

    Heerka tayada

    Halabuurka kiimikada

    C

    Si

    Mn

    P

    S

    Nb

    V

    Ti

    Cr

    Ni

    Cu

    Nd

    Mo

    B

    Als"

    aan ka weynayn

    aan ka yarayn
    Q345 A

    0.20

    0.50

    1.70

    		 0.035 0.035

    0.30

    0.50

    0.20

    0.012

    0.10

    		 —— -
    B 0.035 0.035
    C 0.030 0.030

    0.07

    0.15

    0.20

    0.015
    D

    0.18

    		 0.030 0.025
    E 0.025 0.020
    Q390 A

    0.20

    0.50

    1.70

    		 0.035 0.035

    0.07

    0.20

    0.20

    0.3

    0.50

    0.20

    0.015

    0.10

    		 - -
    B 0.035 0.035
    C 0.030 0.030

    0,015
    D 0.030 0.025
    E 0.025 0.020
    Q42O A

    0.20

    0.50

    1.70

    		 0.035 0.035

    0.07

    0.2

    0.20

    0.30

    0.80

    0.20

    0.015

    0.20

    		 ——

    ——
    B 0.035 0.035
    C 0.030 0.030

    0.015
    D 0.030 0.025
    E 0.025 0.020
    Q46O C

    0.20

    0.60

    1.80

    		 0.030 0.030

    0.11

    0.20

    0.20

    0.30

    0.80

    0.20

    0.015

    0.20

    0.005

    0.015
    D 0.030 0.025
    E 0.025 0.020
    Q500 C

    0J8

    0.60

    1.80

    		 0.025 0.020

    0.11

    0.20

    0.20

    0.60

    0.80

    0.20

    0.015

    0.20

    0.005

    0.015
    D 0.025 0.015
    E 0.020 0.010
    Q550 C

    0.18

    0.60

    2.00

    		 0.025 0,020 0.11

    0.20

    0.20

    0.80

    0.80

    0.20

    0.015

    0.30

    0.005

    0.015
    D 0.025 0,015
    E 0.020 0.010
    Q62O C

    0.18

    0.60

    2.00

    		 0.025 0.020

    0.11

    0.20

    0.20

    1.00

    0.80

    0.20

    0.015

    0.30

    0.005

    0.015
    D 0.025 0.015
    E 0.020 0.010
    a.Marka lagu daro darajooyinka Q345A iyo Q345B, birta waa in ay ka kooban tahay ugu yaraan mid ka mid ah walxaha badarka la safeeyey ee Al, Nb, V, iyo Ti. Marka loo eego baahiyaha, alaab-qeybiyuhu wuxuu ku dari karaa hal ama in ka badan oo walxood oo la safeeyey. Qiimaha ugu badan waa inuu ahaadaa sida lagu qeexay shaxda. Marka la isku daro, Nb + V + Ti kama badna 0.22%b. Q345, Q390, Q420 iyo Q46O, Mo + Cr kama badna 0.30%c. Marka Cr iyo Ni ee fasal kasta loo isticmaalo hadhaaga, waxa ku jira Cr iyo Ni waa in aanay ka badnaan 0.30%; marka ay lagama maarmaan noqoto in lagu daro, waxa ku jira waa in ay buuxiyaan shuruudaha miiska ama ay go'aamiyaan alaab-qeybiyaha iyo iibsadaha iyada oo la tashanayo.d. Haddii alaab-qeybiyuhu uu hubin karo in waxa ku jira nitrogen uu buuxiyo shuruudaha shaxda, falanqaynta waxa ku jira nitrogen lama samayn karo. Haddii Al, Nb, V, Ti iyo walxo kale oo alloy ah oo leh hagaajinta nitrogen lagu daro birta, nuxurka nitrogen ma xaddidna. Nuxurka hagaajinta nitrogen waa in lagu qeexaa shahaadada tayada.e. Marka la isticmaalayo aluminium buuxa, wadarta aluminium ka kooban Alt ≥ 0020%.

    Darajo

    Kaarboon u dhiganta CEV (jajab tiro) /%

    Dhumucda derbiga magacaaban s≤ 16mm

    Dhumucda derbiga magacaaban S2>16 mm〜30 mm

    Dhumucda derbiga magacaaban S>30mm

    Kulul duuban ama caadi laga dhigay

    Demisay xanaaq

    Kulul duuban ama caadi laga dhigay

    Demisay xanaaq

    Kulul duuban ama caadi laga dhigay

    Demisay xanaaq
    Q345

    <0.45

    -

    <0.47

    -

    <0.48

    一
    Q390

    <0.46

    一

    W0.48

    -

    <0.49

    -
    Q420

    <0.48

    一

    <0.50

    <0.48

    <0.52

    <0,48
    Q460

    <0.53

    <0.48

    W0.55

    <0.50

    <0.55

    W0.50
    Q500

    一

    <0.48

    一

    <0.50

    一

    W0.50
    Q550

    -

    <0.48

    .一

    <0.50

    一

    <0.50
    Q62O

    -

    <0.50

    -

    <0.52

    -

    W0.52
    Q690

    -

    		 <0.50

    -

    <0.52

    -

    W0.52

    Hantida Makaanikada

    Sifooyinka makaanikada ee birta qaab dhismeedka birta kaarboon oo tayadoodu sareyso iyo tuubooyin dhismeed oo hooseeya

    Darajo Heerka tayada Xoogga Wax-soo-saarka Xooga dhalidda hoose Dheeraynta jabka ka dib Tijaabada saamaynta
    Dhumucda derbiga magacaaban heerkulka Tamar nuug
    <16 mm >16mm〜 〉30 mm
    30 mm
    aan ka yarayn aan ka yarayn
    10 - >335 205 195 185 24 - -
    15 - >375 225 215 205 22 - 一
    20 —— >410 245 235 225 20 - -
    25 - >450 275 265 255 18 - -
    35 - >510 305 295 285 17 一 -
    45 - 2590 335 325 315 14 - -
    20Mn —• >450 275 265 255 20 - 一
    25Mn - >490 295 285 275 18 - -
    Q345 A 470-630 345 325 295 20 - 一
    B 4 ~ 20 34
    C 21 0
    D -20
    E -40 27
    Q39O A 490-650 390 370 350 18
    B 20 34
    C 19 0
    D -20
    E -40 27
    Q42O A 520-680 420 400 380 18
    B 20 34
    C 19 0
    D -20
    E -40 27
    Q46O C 550-720 460 440 420 17 0 34
    D -20
    E -40 27
    Q500 C 610-770 500 480 440 17 0 55
    D -20 47
    E -40 31
    Q550 C 670-830 550 530 490 16 0 55
    D -20 47
    E -40 31
    Q62O C 710-880 620 590 550 15 0 55
    D -20 47
    E -40 31
    Q690 C 770-94. 690 660 620 14 0 55
    D -20 47
    E -40 31

    Qalabka makaanikada ee tuubooyinka birta daawaha

    NO Darajo Nidaamka daaweynta kulaylka ee lagu taliyay Guryaha xamaasada Dhuumaha birta ee la xiiray ama heer kulkiisu sarreeyo Xaaladda gaarsiinta engegnaanta Brinell HBW
    Deminta (caadiyanaysa) xanaaqsan Wax-soo-saarka Awooda MPa Xoojinta Xoojinta MPa Kordhinta ka dib jebinta A%
    heerkulka qaboojiye Heerkulka qaboojiye
    Horta Labaad aan ka yarayn aan ka weynayn
    1 40Mn2 840 Biyo, saliid 540 Biyo, saliid 885 735 12 217
    2 45Mn2 840 Biyo,saliid 550 Biyo, saliid 885 735 10 217
    3 27SiMn 920 Biyo 450 Biyo, saliid 980 835 12 217
    4 40MnBC 850 saliid 500 Biyo, saliid 980 785 10 207
    5 45MnBC 840 saliid 500 Biyo, saliid 1 030 835 9 217
    6 20Mn2Bc'f 880 saliid 200 Biyo, hawo 980 785 10 187
    7 20CrdJ 880 800 Biyo,saliid 200 Biyo, hawo 835 540 10 179
    785 490 10 179
    8 30Cr 860 saliid 500 Biyo, saliid 885 685 11 187
    9 35Cr 860 saliid 500 Biyo, saliid 930 735 11 207
    10 40Cr 850 saliid 520 Biyo, saliid 980 785 9 207
    11 45Cr 840 saliid 520 Biyo, saliid 1 030 835 9 217
    12 50Cr 830 saliid 520 Biyo, saliid 1 080 930 9 229
    13 38CrSi 900 saliid 600 Biyo, saliid 980 835 12 255
    14 20CrModJ 880 Biyo,saliid 500 Biyo, saliid 885 685 11 197
    845 635 12 197
    15 35CrMo 850 saliid 550 Biyo, saliid 980 835 12 229
    16 42CrMo 850 saliid 560 Biyo, saliid 1 080 930 12 217
    17 38CrMoAld 940 Biyo, saliid 640 Biyo, saliid 980 835 12 229
    930 785 14 229
    18 50CrVA 860 saliid 500 Biyo, saliid 1 275 1 130 10 255
    19 2OCrMn 850 saliid 200 Biyaha, hawada 930 735 10 187
    20 20CrMnSif 880 saliid 480 Biyo, saliid 785 635 12 207
    21 3OCrMnSif 880 saliid 520 Biyo, saliid 1 080 885 8 229
    980 835 10 229
    22 35CrMnSiA£ 880 saliid 230 Biyaha, hawada 1 620 9 229
    23 20CrMnTie-f 880 870 saliid 200 Biyaha, hawada 1 080 835 10 217
    24 30CrMnTie*f 880 850 saliid 200 Biyaha, hawada 1 470 9 229
    25 12CrNi2 860 780 Biyo,saliid 200 Biyaha, hawada 785 590 12 207
    26 12CrNi3 860 780 saliid 200 Biyaha, hawada 930 685 11 217
    27 12Cr2Ni4 860 780 saliid 200 Biyaha, hawada 1 080 835 10 269
    28 40CrNiMoA 850 —— saliid 600 Biyaha, hawada 980 835 12 269
    29 45CrNiMoVA 860 - saliid 460 saliid 1 470 1 325 7 269
    a. Kala-habaynta la oggol yahay ee heerkulka daawaynta kulaylka ee ku taxan shaxda: deminta ± 15 ℃, heerkulka hoose ± 20 ℃, heerkulka sare ee carrada 50 ℃.b. Tijaabada xamaasadda, shaybaarrada transverse ama kuwa dhaadheer ayaa la qaadi karaa. Haddi khilaaf yimaado, muunada dhererka ah waxa loo isticmaalaa saldhiga garqaadista.c. Birta ku jirta boronku waa caadi in la damiyo ka hor, heerkulka caadiga ahna waa inaanu ka badnaan heer kulka deminta.d. Bixinta iyadoo loo eegayo xog urursan oo uu cayimay dalbadaha. Marka dalbadaha uusan cayimin, gaarsiinta waxaa lagu sameyn karaa iyadoo loo eegayo mid ka mid ah xogta.

    e. Deminta ugu horeysa ee birta titanium ee Ming Meng waxaa lagu bedeli karaa caadi.

    f. Heerkulka kuleylka kuleylka leh ee 280 C ~ 320 C.

    g. Tijaabada xajinta, haddii Rel aan la qiyaasi karin, Rp0.2 waa la qiyaasi karaa halkii Rel.

     

    Shuruudaha Imtixaanka

    Halabuurka kiimikada:

    fidsan, Adag, Naxdin, Squash, laablaabashada, Tijaabada Ultrasonic, Eddy current, ogaanshaha, ogaanshaha leak, galvanized

    Faahfaahinta Alaabta

    Tuubooyinka Makaanikada/Kimikada & Bacriminta


    GB/T 8162-2008


    ASTM A519-2006


    TS EN 10210-1-2006


    ASTM A53/A53M-2012


    GB 9948-2006


    GB 6479-2013


    GB/T 17396-2009

  • Kii hore:
  • Xiga:
    • Halkan ku qor fariintaada oo noo soo dir
    Ku dhufo geli si aad u baadho ama ESC si aad u xidhid