Shiinaha Tubooyinka Biraha iyo Tubooyinka Kuleyliyaha Cadaadiska Sare (Kaarboon, Alloy) Soo saaraha iyo Alaabta

Tubooyinka birta ah ee aan xumi lahayn iyo tuubooyinka loogu talagalay kuleyliyeyaasha Cadaadiska Sarreeya (Kaarboon, Alloy)

Tubooyinka birta ah ee aan xumi lahayn iyo tuubooyinka loogu talagalay kuleyliyeyaasha Cadaadiska Sare (kaarboon, Alloy) Sawirka

Sharaxaad Gaaban:

Tuubbada birta ah ee aan fiicnayn ee loo isticmaalo kuleyliyaha cadaadiska sare waa nooc ka mid ah tuubada kuleyliyaha, kaas oo leh shuruudo adag oo ku saabsan darajada birta iyo tiknoolajiyada loo isticmaalo soo saarista tuubada birta. tuubada in gaaska qiiqa heerkulka sare iyo uumiga biyaha, oxidation iyo daxalka.The birta waxaa looga baahan yahay in ay leeyihiin xoog waara sare, caabbinta oxidation sare iyo xasilloonida microstructure wanaagsan. Dhuumaha, tuubada uumiga weyn iyo wixii la mid ah ee cadaadiska sare iyo kuleyliyaha cadaadiska aadka u sarreeya.

Qalabka ugu muhiimsan waa: ASTM / ASMEA-1, B, T22 / T22, T2 / P2 iyo wixii la mid ah, heerkulka shaqada waa 450 ℃-650 ℃

Lacag bixinta30% deebaaji, 70% L/C ama nuqul B/L ama 100% L/C marka la eego

Tirada Dalbashada Min.1 PC

Awooda wax bixinta:Sannadkii 20000 Tan ee Tubta Birta

Waqtiga Hogaaminta:7-14 maalmood haddii kaydka, 30-45 maalmood si loo soo saaro

Baakad:Baabi'inta Madow, gogosha iyo daboolka tuubo kasta; OD ka hooseeya 219mm waxay u baahan tahay in lagu xidho xidhmo, xidhmo kastana kama badna 2 tan.

Email noogu soo dir U soo deji sidii PDF

Faahfaahinta Alaabta

Tags Product

Dulmar

Heerka: GB/T5310-2017

Kooxda Fasalka: 20G, 20MnG, 25MnG, iwm

Dhumucda: 1 - 100 mm

Dhexroorka (wareega): 10 - 1200 mm

Dhererka: Dhererka go'an ama dhererka random (6-12m)

Qaabka Qaybta: Wareeg

Meesha Asal ahaan: Shiinaha

Shahaadada: ISO9001:2008

Alloy Mise: Alloy

Codsiga: Dhuumaha kululeeyaha

Daaweynta Dusha sare: Sida looga baahan yahay macmiilka

Farsamada: Hot Rolled

Daaweynta kulaylka: Annealing/caadaynta

Dhuumaha Gaarka ah: Dhuumaha kululeeyaha

Isticmaalka: kululeeyaha iyo kulaylka

Imtixaan: ECT/UT/Hydrau Static

Codsiga

Waxaa inta badan loo isticmaalaa in lagu sameeyo bir qaab dhismeedka kaarboon oo tayo sare leh, birta qaab dhismeedka daawaha ah iyo birta kulaylka u adkeysi la'aanta ah ee tuubooyinka birta ee cadaadiska sare iyo ka sarreeya tubooyinka kululeeyaha uumiga.

Inta badan loo isticmaalo cadaadiska sare iyo adeega heerkulka sare ee kuleyliyaha (tuubo kululeeyaha, tuubada dib u kululeeyaha, tuubada hagaha hawada, tuubada ugu weyn ee kululeeyaha cadaadiska sare iyo ultra sare). Marka la eego ficilka gaaska qiiqa heerkulkiisu sarreeyo iyo uumiga biyaha, tuubada ayaa oxidized oo qudhmi doonta. Waxaa loo baahan yahay in tuubada birta ay leedahay adkeysi sare, iska caabin sare oo oksaydhka iyo daxalka, iyo xasilloonida qaabdhismeedka wanaagsan.

Fasalka ugu weyn

Fasalka birta qaabdhismeedka tayada sare leh: 20g, 20mng, 25mng

Fasalka birta qaab dhismeedka alloy: 15mog, 20mog, 12crmog, 15crmog, 12cr2mog, 12crmovg, 12cr3movsitib, iwm

Darajada birta kulaylka u adkaysata ee miridhku u adkaysta: 1cr18ni9 1cr18ni11nb

Qayb Kiimiko ah

Darajo	Tayada Fasalka	Hantida Kiimikada
		C	Si	Mn	P	S	Nb	V	Ti	Cr	Ni	Cu	Nd	Mo	B	Als"
		aan ka badnayn														aan ka yarayn
Q345	A	0.20	0.50	1.70	0.035	0.035				0.30	0.50	0.20	0.012	0.10	-	-
	B				0.035	0.035
	C				0.030	0.030	0.07	0.15	0.20							0.015
	D	0.18			0.030	0.025
	E				0.025	0.020
Q390	A	0.20	0.50	1.70	0.035	0.035	0.07	0.20	0.20	0.3.	0.50	0.20	0.015	0.10	-	-
	B				0.035	0.035
	C				0.030	0.030										0.015
	D				0.030	0.025
	E				0.025	0.020
Q420	A	0.20	0.50	1.70	0.035	0.035	0.07	0.2.	0.20	0.30	0.80	0.20	0.015	0.20	-	-
	B				0.035	0.035
	C				0.030	0.030										0.015
	D				0.030	0.025
	E				0.025	0.020
Q460	C	0.20	0.60	1.80	0.030	0.030	0.11	0.20	0.20	0.30	0.80	0.20	0.015	0.20	0.005	0.015
	D				0.030	0.025
	E				0.025	0.020
Q500	C	0.18	0.60	1.80	0.025	0.020	0.11	0.20	0.20	0.60	0.80	0.20	0.015	0.20	0.005	0.015
	D				0.025	0.015
	E				0.020	0.010
Q550	C	0.18	0.60	2.00	0.025	0,020	0.11	0.20	0.20	0.80	0.80	0.20	0.015	0.30	0.005	0.015
	D				0.025	0,015
	E				0.020	0.010
Q620	C	0.18	0.60	2.00	0.025	0.020	0.11	0.20	0.20	1.00	0.80	0.20	0.015	0.30	0.005	0.015
	D				0.025	0.015
	E				0.020	0.010
Marka laga reebo darajooyinka Q345A iyo Q345B, birta waa in ay ka kooban tahay ugu yaraan mid ka mid ah walxaha badarka la safeeyey ee Al, Nb, V, iyo Ti. Marka loo eego baahiyaha, alaab-qeybiyuhu wuxuu ku dari karaa hal ama in ka badan oo walxo hadhuudh ah oo la safeeyey, qiimaha ugu sarreeya waa inuu buuxiyo shuruudaha miiska. Marka la isku daro, Nb + V + Ti <0.22% °Q345, Q390, Q420 iyo Q46O, Mo + Cr <0.30% in ka badan 0.30%; marka ay u baahan tahay in lagu daro, nuxurkeedu waa in uu buuxiyo shuruudaha shaxda ama waxaa go'aaminaya alaab-qeybiyaha iyo iibsadaha iyada oo la tashanayo. aan la fulin. Haddii Al, Nb, V, Ti iyo walxo kale oo alloy ah oo leh hagaajinta nitrogen lagu daro birta, nuxurka nitrogen ma xaddidna. Waxa ku jira hagaajinta nitrogen waa in lagu qeexaa shahaadada tayada.'Marka la isticmaalayo dhammaan aluminium, wadarta aluminium ka kooban AIT ^ 0.020% B

Hantida Makaanikada

No	Darajo	Hantida Makaanikada
		Jilicsan MPa	Wax-soo-saarka MPa	Kordhi L/T	Saamayn (J) Toosan/Horesonal	Gacan-qabsiga HB
1	20G	410- 550	≥ 245	24/22%	40/27	-
2	20MnG	415- 560	≥ 240	22/20%	40/27	-
3	25MnG	485- 640	≥ 275	20/18%	40/27	-
4	15MoG	450- 600	≥ 270	22/20%	40/27	-
6	12CrMoG	410- 560	≥ 205	21/19%	40/27	-
7	15CrMoG	440- 640	≥ 295	21/19%	40/27	-
8	12Cr2MoG	450- 600	≥ 280	22/20%	40/27	-
9	12Cr1MoVG	470- 640	≥ 255	21/19%	40/27	-
10	12Cr2MoWVTiB	540- 735	≥ 345	18/-%	40/-	-
11	10Cr9Mo1VNbN	≥ 585	≥ 415	20/16%	40/27	≤ 250
12	10Cr9MoW2VNbBN	≥ 620	≥ 440	20/16%	40/27	≤ 250

Dulqaad

Dhumucda gidaarka iyo dhexroorka dibadda:

Haddii aysan jirin shuruudo gaar ah, tuubooyinku waxa ay noqonayaan sida dhexroorka caadiga ah iyo dhumucda gidaarka caadiga ah. Sida xaashida soo socota

Kala saarista	Habka wax-soo-saarka	Cabbirka tuubada			Dulqaad
					Darajada caadiga ah	Darajo sare
WH	Hot Rolled (extrude) tuubo	Dhexroorka dibadda ee caadiga ah (D)	<57		士 0.40	±0,30
			57 〜325	SW35	±0.75%D	±0.5%D
				S>35	±1%D	±0.75%D
			>325-6.		+ 1%D ama + 5. Qaado mid ka yar 一2
			>600		+ 1%D ama + 7, qaado mid ka yar 一2
		Dhumucda darbiga caadiga ah (S)	<4.0		±\|・丨）	±0.35
			>4.0-20		+ 12.5% S	± 10% S
			>20	DV219	± 10% S	± 7.5% S
				心219	+ 12.5% S -10% S	土10% S

WH	Dhuumaha balaadhinta kulaylka	Dhexroorka dibadda ee caadiga ah (D)	dhammaan	±1%D	± 0.75%
WH	Dhuumaha balaadhinta kulaylka	Dhumucda darbiga caadiga ah (S)	dhammaan	+ 20% S -10% S	+ 15% S -io%s
WC	Qabow la sawiray (duubay) Ppipe	Dhexroorka dibadda ee caadiga ah (D)	<25.4	±'L1j	-
			>25.4 〜4 ()	±0.20
			>40 〜50	\|:0.25	-
			>50 〜60	±0.30
			>60	±0.5%D
		Dhumucda darbiga caadiga ah (S)	<3.0	±0.3	±0.2
		Dhumucda darbiga caadiga ah (S)	>3.0	S	± 7.5% S

Dhererka:

Dhererka caadiga ah ee tuubooyinka birta waa 4 000 mm ~ 12 000 mm. Ka dib markii la tashaday alaab-qeybiyaha iyo iibsadaha, oo buuxi qandaraaska, waxaa la geyn karaa tuubooyinka birta oo dhererkoodu ka weyn yahay 12 000 mm ama ka gaaban I 000 mm laakiin aan ka gaabanayn 3 000 mm; dhererka gaaban Tirada tuubooyinka birta ee ka yar 4,000 mm laakiin aan ka yarayn 3,000 mm waa in aanay ka badnayn 5% tirada guud ee tuubooyinka birta ee la keenay.

Miisaanka gaarsiinta:
Marka tuubada birta la keeno iyadoo loo eegayo dhexroorka dibadda ee magaca iyo dhumucda derbiga magacaaban ama dhexroorka gudaha iyo dhumucda derbiga magacaaban, tuubada birta waxaa la geeyaa iyadoo loo eegayo miisaanka dhabta ah. Waxa kale oo lagu geyn karaa iyadoo loo eegayo miisaanka aragtida.
Marka tuubada birta la keeno iyadoo loo eegayo dhexroorka sare ee magaca iyo dhumucda gidaarka ugu yar, tuubada birta waxaa la geeyaa iyadoo loo eegayo miisaanka dhabta ah; dhinacyada saadka iyo baahida ayaa ka wada xaajooda. Waxaana lagu tilmaamay heshiiska. Dhuumaha birta sidoo kale waxaa lagu geyn karaa iyadoo loo eegayo miisaanka aragtida.

U dulqaadashada miisaanka:
Marka loo eego shuruudaha iibsadaha, ka dib markii la tashaday alaab-qeybiyaha iyo iibsadaha, iyo qandaraaska, leexinta u dhaxaysa miisaanka dhabta ah iyo miisaanka aragtida ee tuubada birta bixinta waa inay buuxisaa shuruudaha soo socda:
a) Dhuumaha birta ah ee keliga ah: ± 10%;
b) Qayb kasta oo tuubooyinka birta ah oo leh cabbirka ugu yar ee 10 t: ± 7.5%.

Shuruudaha Imtixaanka

Tijaabada Biyo-baxa:

Dhuumaha birta waa in si biyo ah mid mid loo tijaabiyaa. Cadaadiska ugu badan ee tijaabada waa 20 MPa. Cadaadiska tijaabada, wakhtiga xasilinta waa inuusan ka yarayn 10 s, iyo tuubada birta ah waa inaysan daadin.

Ka dib marka isticmaaluhu ogolaado, tijaabada hydraulicka waxa lagu bedeli karaa tijaabinta hadda jirta ama tijaabada dheecaanka birlabeedka.

Tijaabada aan burburin:

Tuubooyinka u baahan baaris dheeraad ah waa in ultrasonically loo baaro mid mid. Ka dib markii gorgortanku u baahan yahay ogolaanshaha dhinaca oo lagu qeexay qandaraaska, imtixaano kale oo aan burburin ayaa lagu dari karaa.

Tijaabada fidsan:

Tuubooyinka leh dhexroorka dibadda ee ka weyn 22 mm waa in la mariyaa tijaabo simi ah. Ma jiro delamination muuqda, baro cad, ama wasakhdu waa inay dhacaan inta lagu jiro tijaabada oo dhan.

Tijaabada Daboolida

Marka loo eego shuruudaha iibsadaha oo lagu sheegay qandaraaska, tuubada birta ee leh dhexroorka dibadda ≤76mm iyo dhumucda derbiga ≤8mm waxaa lagu sameyn karaa tijaabin gubasho. Tijaabada waxaa lagu sameeyay heer kulka qolka iyadoo taper ah 60 °. Daboolida ka dib, heerka ololka ee dhexroorka dibadda waa inuu buuxiyaa shuruudaha miiska soo socda, iyo walxaha tijaabada ah waa inaysan muujin dildilaacyo ama dillaac.

Nooca Birta	Dhexroorka bannaanka heerka ololaya ee tuubada birta/%
	Dhexroorka Gudaha/Dhererka
	<0.6	>0.6 〜0.8	>0.8
Bir dhismeed kaarboon oo tayo sare leh	10	12	17
Bir daawaha qaab dhismeedka	8	10	15
• Dhexroorka gudaha waxaa loo xisaabiyaa shaybaarka.