Ifektri etshiphu eshushu yase China iCarbon Steel ingxubevange yentsimbi yentsimbi engenamthungo iTubing A106/A179/A192/A355 P5, P9, P11, P22
Yonke into esiyenzayo ihlala ibandakanyeka kwi-tenet yethu ” Umthengi oza kuqala ngaye, Thembela ekuqaleni, ukunikezela ngaphezulu kokupakishwa kwezinto zokutya kunye nokhuseleko lokusingqongileyo kwiFactory eshibhile eshushu yase China Carbon Steel Alloy Steel Seamless Tubing A106/A179/A192/A355 P5, P9, P11, P22, Inkampani yethu ijonge ngolangazelelo ekusekeni ubudlelwane bexesha elide nobunobuhlobo kunye nabathengi kunye noosomashishini abavela kwihlabathi liphela.
Yonke into esiyenzayo ihlala ibandakanyeka kwitenet yethu ” Umthengi oza kuqala ngaye, Thembela ekuqaleni, ukuzinikela ekupakishweni kwezinto zokutya kunye nokhuseleko lokusingqongileyo.China Steel Pipe, Umbhobho ongenamthungo, Siye saseka ubudlelwane bexesha elide, obuzinzileyo kunye nobuhle beshishini kunye nabavelisi abaninzi kunye nabathengisi kwihlabathi liphela. Okwangoku, sijonge phambili kwintsebenziswano enkulu ngakumbi nabathengi baphesheya kweelwandle ngokusekwe kwiinzuzo ezifanayo. Qinisekisa ukuba uziva ukhululekile ukuqhagamshelana nathi ngeenkcukacha ezithe kratya.
Isishwankathelo
Isicelo
Isetyenziswa ikakhulu ukwenza umgangatho ophezulu wekhabhoni yentsimbi, umbhobho webhoyila woxinzelelo oluphantsi, umbhobho oshushu oshushu kakhulu ongenamthungo wecarbon.
IBanga eliPhambili
Ibakala eliphezulu carbon yesakhiwo steel: 10 #,20 #
ICandelo leMichiza
| Umgangatho | IBanga | Ukwakhiwa kwemichiza(%) | |||||||
| C | Si | Mn | P | S | Cr | Cu | Ni | ||
| GB3087 | 10 | 0.07-0.13 | 0.17-0.37 | 0.38-0.65 | ≤0.030 | ≤0.030 | 0.3-0.65 | ≤0.25 | ≤0.30 |
| 20 | 0.17-0.23 | 0.17-0.37 | 0.38-0.65 | ≤0.030 | ≤0.030 | 0.3-0.65 | ≤0.25 | ≤0.30 | |
IPropati yoomatshini
| Umgangatho | Umbhobho wentsimbi | Ubunzima bodonga | Tensile strength | Unikeze Amandla | Ukwandisa |
| GB3087 | (mm) | (MPa) | (MPa) | % | |
| ≥ | |||||
| 10 | / | 335-475 | 195 | 24 | |
| 20 | ＜15 | 410-550 | 245 | 20 | |
| ≥15 | 225 | ||||
Ukunyamezelana
Ukuphambuka okuvumelekileyo kwedayimitha yangaphandle yeetyhubhu zetsimbi
| Uhlobo lwetyhubhu yentsimbi | Ukutenxa okuvumelekileyo | ||||||
| I-Hot rolled (extruded, eyandisiweyo) ityhubhu yentsimbi | ± 1.0% D okanye ± 0.50, thatha inani elikhulu | ||||||
| Ityhubhu yentsimbi ebandayo (iqengqiwe). | ± 1.0% D okanye ± 0.30, thatha inani elikhulu | ||||||
Ukutenxeka okuvumelekileyo kobukhulu bodonga lwemibhobho yentsimbi eshushu (i-extrusion, isandiso)
Iyunithi: mm
| Uhlobo lwetyhubhu yentsimbi | Idayimitha yangaphandle yetyhubhu yentsimbi | S/D | Ukutenxa okuvumelekileyo | ||||||
| ityhubhu yentsimbi eshushu iqengqeleke (extruded). | ≤ 102 | - | ± 12.5 % S okanye ± 0.40, thatha inani elikhulu | ||||||
| > 102 | ≤ 0.05 | ± 15% S okanye ± 0.40, thatha inani elikhulu | |||||||
| > 0.05 ~ 0.10 | ± 12.5% S okanye ± 0.40, thatha inani elikhulu | ||||||||
| > 0.10 | + 12,5% S | ||||||||
| - 10% S | |||||||||
| ityhubhu yentsimbi eshushu yandisa | + 15% S | ||||||||
Ukuphambuka okuvumelekileyo kodonga lodonga lwemibhobho yentsimbi ebandayo (eqengqiwe).
Iyunithi: mm
| Uhlobo lwetyhubhu yentsimbi | Ubunzima bodonga | Ukutenxa okuvumelekileyo | ||||||
| Ityhubhu yentsimbi ebandayo (iqengqiwe). | ≤ 3 | 15 – 10 % S okanye ± 0.15, thatha inani elikhulu | ||||||
| > 3 | + 12,5% S | |||||||
| - 10% S | ||||||||
Imfuneko yoVavanyo
Uvavanyo lokucaba
Iityhubhu zentsimbi ezinobubanzi obungaphezulu kwe-22 mm ukuya kutsho kwi-400 mm, kunye nobukhulu bodonga obungaphezulu kwe-10 mm kufuneka zenze uvavanyo lokucaba. Emva kokuba iisampulu zityatyekwe
Ukugoba uvavanyo
Iityhubhu zentsimbi ezinobubanzi obungaphandle obungekho ngaphezulu kwe-22 mm kufuneka zingene kuvavanyo lokugoba. I-engile yokugoba yi-90o. I-radius yokugoba ngamaxesha angama-6 ububanzi bangaphandle bombhobho wensimbi.Emva kokugoba isampuli, akukho kuphazamiseka okanye ukuqhekeka kuvunyelwe ukuba kubonakale kwisampuli.
Uviwo lweMacroscopic
Kwiityhubhu zentsimbi ezenziwe ngokuthe gqolo ngokuphoswa kweebhilidi okanye ii-ingots zentsimbi, iqela elinikezelayo kufuneka liqinisekise ukuba akukho mabala amhlophe, ukungcola, amaqamza omoya angaphantsi komhlaba, amabala okakayi okanye ukwaleka kwi-asidi evutshiweyo ye-macroscopic tissue ye-billet okanye ityhubhu yentsimbi.
Ukuhlolwa okungonakalisi
Ngokwesicelo seqela elifunayo, elithe ke lixoxisana phakathi kwamaqela anikezelayo kunye nalawo afunayo kwaye aboniswe kwisivumelwano, ukufumanisa impazamo ye-ultrasonic inokwenziwa ngabanye kwiityhubhu zetsimbi. I-longitudinal manual defect ye-tube yesampuli yereferensi kufuneka ihlangabezane neemfuno zokwamkelwa emva kokuhlolwa kwebakala C8 elichazwe kwi-GB / T 5777-1996.
Iinkcukacha zeMveliso
Umbhobho weBoiler woxinzelelo oluphezulu
GB/T5310-2017
ASME SA-106/SA-106M-2015
I-ASTMA210(A210M)-2012
ASME SA-213/SA-213M
