I-China GB/T5310-2008 Iityhubhu zentsimbi ezingenamthungo uMvelisi kunye noMboneleli

I-GB/T5310-2008 Iityhubhu zentsimbi ezingenamthungo

Inkcazelo emfutshane:

Umgangatho ophezulu we-carbon structural steel, i-alloy structural iron, kunye nentsimbi yensimbi engenasici ekwazi ukumelana nobushushu, umbhobho wensimbi ongenamthungo woxinzelelo oluphezulu nangaphezulu kwemibhobho yebhoyila yomphunga kwi-GB/T5310-2007 standard. I-alloy structure steel 15MoG, 20MoG, 12CrMoG, 15CrMoG, 12Cr2MoG, 12CrMoVG, 12Cr3MoVSiTiB, njl.

Intlawulo:30% idiphozithi, 70% L/C okanye B/L ikopi okanye 100% L/C emehlweni

Min.Ubungakanani boMyalelo:I-PC eyi-1

Ukubonelela ngezakhono:Ngonyaka 20000 Tons Inventory of Steel Pipe

Ixesha lokukhokhela:7-14 iintsuku ukuba isitokhwe, 30-45 iintsuku ukuvelisa

Ukupakisha:Ukunyamalala okumnyama, i-bevel kunye ne-cap yombhobho ngamnye; I-OD engaphantsi kwe-219mm kufuneka ipakishwe kwi-bundle, kwaye ibhandle nganye ayidluli kwiitoni ezi-2.

Thumela i-imeyile kuthi Khuphela njengePDF

Iinkcukacha zeMveliso

Iithegi zeMveliso

Isishwankathelo

Umgangatho: GB/T5310-2017	Ingxubevange okanye hayi: Ingxubevange
IQela leBanga: 20G, 20MnG, 25MnG, njl	Isicelo: Umbhobho weBoiler
Ukutyeba: 1 - 100 mm	Unyango loMphezulu: Njengemfuno yomthengi
I-Diameter yangaphandle (Round): 10 - 1200 mm	Ubuchwephesha: I-Hot Rolled
Ubude: Ubude obuzinzileyo okanye ubude obungacwangciswanga (6-12m)	Unyango lobushushu: Ukuphelisa/ukwenza oko kuqhelekileyo
Ubume beCandelo: Round	Umbhobho okhethekileyo: Umbhobho weBoiler
Indawo yemvelaphi: eTshayina	Ukusetyenziswa: I-Boiler kunye ne-Heat Exchanger
Isiqinisekiso: ISO9001:2008	Uvavanyo: ECT / UT / Hydrau Static

Isicelo

Isetyenziswa ikakhulu ukwenza umgangatho ophezulu wekhabhoni yentsimbi, intsimbi yesakhiwo sealloyi kunye nentsimbi engatyiwa ngumthungo yemibhobho yentsimbi engenamthungo yoxinzelelo oluphezulu nangaphezulu kwemibhobho yebhoyila yomphunga.

Isetyenziswa ikakhulu kuxinzelelo oluphezulu kunye nenkonzo yobushushu obuphezulu bebhoyila (ityhubhu yeheater, ityhubhu yokufudumeza, ityhubhu yesikhokelo somoya, ityhubhu ephambili yomphunga kwizibiyeli zoxinzelelo oluphezulu kunye noxinzelelo oluphezulu). Ngaphantsi kwesenzo segesi ephezulu yokushisa kunye nomphunga wamanzi, ityhubhu iya ku-oxidize kwaye idle. Kuyadingeka ukuba umbhobho wensimbi unokuqina okuphezulu, ukuchasana okuphezulu kwi-oxidation kunye nokugqwala, kunye nokuzinza okuhle kwesakhiwo.

IBanga eliPhambili

IBanga le-carbon high-quality steel structure: 20g, 20mng, 25mng

IBanga le-alloy yensimbi yesakhiwo: 15mog, 20mog, 12crmog, 15crmog, 12cr2mog, 12crmovg, 12cr3movsitib, njl.

Ibakala lentsimbi ekwaziyo ukumelana nobushushu: 1cr18ni9 1cr18ni11nb

ICandelo leMichiza

IBanga	Umgangatho Iklasi	Ipropati yeMichiza
		C	Si	Mn	P	S	Nb	V	Ti	Cr	Ni	Cu	Nd	Mo	B	Als"
		不大于														不小于
Q345	A	0.20	0.50	1.70	0.035	0.035				0.30	0.50	0.20	0.012	0.10	-	-
	B				0.035	0.035
	C				0.030	0.030	0.07	0.15	0.20							0.015
	D	0.18			0.030	0.025
	E				0.025	0.020
Q390	A	0.20	0.50	1.70	0.035	0.035	0.07	0.20	0.20	0.3	0.50	0.20	0.015	0.10	-	-
	B				0.035	0.035
	C				0.030	0.030										0,015
	D				0.030	0.025
	E				0.025	0.020
Q42O	A	0.20	0.50	1.70	0.035	0.035	0.07	0.2	0.20	0.30	0.80	0.20	0.015	0.20	-	-
	B				0.035	0.035
	C				0.030	0.030										0.015
	D				0.030	0.025
	E				0.025	0.020
Q46O	C	0.20	0.60	1.80	0.030	0.030	0.11	0.20	0.20	0.30	0.80	0.20	0.015	0.20	0.005	0.015
	D				0.030	0.025
	E				0.025	0.020
Q500	C	0.18	0.60	1.80	0.025	0.020	0.11	0.20	0.20	0.60	0.80	0.20	0.015	0.20	0.005	0.015
	D				0.025	0.015
	E				0.020	0.010
Q550	C	0.18	0.60	2.00	0.025	0,020	0.11	0.20	0.20	0.80	0.80	0.20	0.015	0.30	0.005	0.015
	D				0.025	0,015
	E				0.020	0.010
Q62O	C	0.18	0.60	2.00	0.025	0.020	0.11	0.20	0.20	1.00	0.80	0.20	0.015	0.30	0.005	0.015
	D				0.025	0.015
	E				0.020	0.010
Ngaphandle kwamabakala e-Q345A kunye ne-Q345B, intsimbi kufuneka iqulethe ubuncinane enye yezinto eziziinkozo ezicocekileyo i-Al, Nb, V, kunye ne-Ti. Ngokweemfuno, umthengisi unokongeza enye okanye ngaphezulu kwezinto eziziinkozo eziphuculweyo, ixabiso eliphezulu Kufuneka lihlangabezane neemfuno kwitheyibhile. Xa zidityanisiwe, Nb + V + Ti <0.22% °Kumabanga e-Q345, Q390, Q420 kunye ne-Q46O, Mo + Cr <0.30% oXa ibakala ngalinye le-Cr kunye ne-Ni lisetyenziswa njengento eshiyekileyo, umxholo we-Cr no-Ni akufanelekanga ibe ngaphezu kwe-0.30%; xa kufuneka ifakwe, umxholo wayo kufuneka uhlangabezane neemfuno kwitheyibhile okanye unqunywe ngumthengisi kunye nomthengi ngokubonisana. J Ukuba umthengisi unokuqinisekisa ukuba umxholo we-nitrogen uhlangabezana neemfuno kwitheyibhile, uhlalutyo lomxholo we-nitrogen alunakwenziwa. Ukuba i-Al, i-Nb, i-V, i-Ti kunye nezinye izinto ze-alloy kunye nokulungiswa kwe-nitrogen zongezwa kwintsimbi, umxholo we-nitrogen awukhawulelwanga. Umxholo wokulungiswa kwenitrogen kufuneka ucaciswe kwisiqinisekiso somgangatho. 'Xa usebenzisa yonke i-aluminiyam, umxholo we-aluminiyam iyonke AIt ^ 0.020% B

IPropati yoomatshini

No	IBanga	IPropati yoomatshini
		Ukuqina MPa	Yima kancinci MPa	Yandisa L/T	Impembelelo (J) Ngokuthe nkqo/ Ukuthe tye	Isandla HB
1	20G	410- 550	≥ 245	24/22%	40/27	-
2	20MnG	415- 560	≥ 240	22/20%	40/27	-
3	25MnG	485- 640	≥ 275	20/18%	40/27	-
4	15MoG	450- 600	≥ 270	22/20%	40/27	-
6	12CrMoG	410- 560	≥ 205	21/19%	40/27	-
7	15CrMoG	440- 640	≥ 295	21/19%	40/27	-
8	12Cr2MoG	450- 600	≥ 280	22/20%	40/27	-
9	12Cr1MoVG	470- 640	≥ 255	21/19%	40/27	-
10	12Cr2MoWVTiB	540- 735	≥ 345	18/-%	40/-	-
11	10Cr9Mo1VNbN	≥ 585	≥ 415	20/16%	40/27	≤ 250
12	10Cr9MoW2VNbBN	≥ 620	≥ 440	20/16%	40/27	≤ 250

Ukunyamezelana

Ukutyeba kweendonga kunye neDayimitha yaNgaphandle:

Ukuba akukho mfuneko zikhethekileyo, umbhobho uya kuhanjiswa njengedayamitha yangaphandle eqhelekileyo kunye nobukhulu bodonga oluqhelekileyo. Njengephepha elilandelayo

Ukutyunjwa kokuhlelwa	Indlela yokwenziwa	Ubungakanani bombhobho			Ukunyamezelana
					Ibanga eliqhelekileyo	Ibanga eliphezulu
WH	Umbhobho oshushu (extrude)	Idayamitha yangaphandle eqhelekileyo (D)	<57		Umhla 0.40	±0,30
			57 〜325	SW35	±0.75%D	±0.5%D
				S>35	±1%D	±0.75%D
			>325 ukuya ku6.		+ 1%D okanye + 5.Thatha enye encinane一2
			> 600		+ 1%D okanye + 7,Thatha engaphantsi kwe2
		Ukutyeba kodonga oluqhelekileyo (S)	<4.0		±\|・丨）	±0.35
			>4.0-20		+ 12,5%S	±10%S
			>20	DV219	±10%S	±7.5%S
				心219	+ 12.5%S -10%S	土10%S

WH	Umbhobho wokwandisa i-Thermal	Idayamitha yangaphandle eqhelekileyo (D)	zonke	±1%D	±0.75%.
WH	Umbhobho wokwandisa i-Thermal	Ukutyeba kodonga oluqhelekileyo (S)	zonke	+ 20%S -10%S	+ 15%S -io%s
i-WC	Kuyabanda (kuqengqiwe) Umbhobho	Idayamitha yangaphandle eqhelekileyo (D)	<25.4	±'L1j	-
			>25.4 〜4()	±0.20
			> 40 〜50	\|:0.25	-
			>50〜60	±0.30
			>60	±0.5%D
		Ukutyeba kodonga oluqhelekileyo (S)	<3.0	±0.3	±0.2
		Ukutyeba kodonga oluqhelekileyo (S)	>3.0	S	±7.5%S

Ubude:

Ubude obuqhelekileyo bemibhobho yentsimbi yi-4 000 mm ~ 12 000 mm. Emva kokubonisana phakathi komthengisi kunye nomthengi, kwaye ugcwalise isivumelwano, inokuhanjiswa imibhobho yentsimbi kunye nobude obungaphezu kwe-12 000 mm okanye mfutshane kune-I 000 mm kodwa ingabi mfutshane kune-3 000 mm; ubude obufutshane Inani lemibhobho yentsimbi engaphantsi kwe-4,000 mm kodwa ingabi ngaphantsi kwe-3,000 mm ayisayi kudlula i-5% yenani lilonke lemibhobho yentsimbi ehanjiswayo.

Ubunzima bokuhanjiswa:
Xa umbhobho wensimbi uhanjiswa ngokomlinganiselo wangaphandle wegama kunye nobukhulu bodonga olubizwa ngokuba yi-nominal yangaphakathi kunye nobukhulu bodonga, umbhobho wensimbi uhanjiswa ngokobunzima bangempela. Isenokuhanjiswa ngokobunzima bethiyori.
Xa umbhobho wensimbi uhanjiswa ngokomlinganiselo wangaphandle wegama kunye nobukhulu obuncinci bodonga, umbhobho wensimbi uhanjiswa ngokwesisindo sangempela; amaqela obonelelo kunye nebango ayathethathethana. Kwaye kubonisiwe kwikhontrakthi. Umbhobho wensimbi unokuhanjiswa ngokobunzima bethiyori.

Ukunyamezela ubunzima:
Ngokweemfuno zomthengi, emva kokubonisana phakathi komthengisi kunye nomthengi, kunye nekhontrakthi, ukutenxa phakathi kobunzima bokwenene kunye nobunzima bethiyori yombhobho wentsimbi yokuhanjiswa kuya kuhlangabezana nezi mfuno zilandelayo:
a) Umbhobho wentsimbi enye: ± 10%;
b) Ibhetshi nganye yemibhobho yentsimbi enobungakanani obuncinane be-10 t: ± 7.5%.

Imfuneko yoVavanyo

Uvavanyo lweHydraustatic:

Umbhobho wentsimbi kufuneka uvavanywe nge-hydraulically nganye nganye. Uxinzelelo oluphezulu lovavanyo luyi-20 MPa. Ngaphantsi koxinzelelo lovavanyo, ixesha lokuzinzisa kufuneka lingabi ngaphantsi kwe-10 s, kwaye umbhobho wensimbi akufanele uvuze.

Emva kokuba umsebenzisi evumile, uvavanyo lwe-hydraulic lunokutshintshwa ngovavanyo lwangoku lwe-eddy okanye uvavanyo lokuvuza kwemagnethi.

Uvavanyo olungonakaliyo:

Imibhobho efuna ukuhlolwa okungakumbi kufuneka ihlolwe nge-ultrasonically nganye. Emva kokuba uthethathethwano lufuna imvume yeqela kwaye luchazwe kwikhontrakthi, olunye uvavanyo olungonakalisi lungongezwa.

Uvavanyo lokucaba:

Iityhubhu ezinobukhulu obungaphandle obungaphezulu kwe-22 mm ziya kufakwa kuvavanyo lokucaba. Akukho delamination ebonakalayo, amabala amhlophe, okanye ukungcola kufuneka kwenzeke ngexesha lonke uvavanyo.

Uvavanyo lokuvutha:

Ngokweemfuno zomthengi kwaye zichazwe kwikhontrakthi, umbhobho wensimbi kunye nobubanzi obungaphandle ≤76mm kunye nobukhulu bodonga ≤8mm lunokwenziwa uvavanyo lokuvutha . Uvavanyo lwenziwa kwiqondo lobushushu begumbi kunye ne-taper ye-60 °. Emva kokuvutha, isantya sokuvutha kobubanzi bangaphandle kufuneka sihlangabezane neemfuno zetafile elandelayo, kwaye izinto zokuvavanya akufanele zibonise ukuqhekeka okanye ukukrazula.

Uhlobo lwentsimbi	Umyinge wokuvutha wedayamitha yangaphandle yombhobho wentsimbi/%
	I-Diameter yangaphakathi / i-Outer Diameter
	<0.6	>0.6 〜0.8	>0.8
Umgangatho ophezulu we-carbon structural steel	10	12	17
Intsimbi ye-alloy yesakhiwo	8	10	15
•Idayimitha yangaphakathi ibalwa kwisampulu.