English
中文

OEM/ODM China Pressure Boiler Cylinder Oyile Ulwakhiwo lwegesi Ingxubevange yemibhobho yentsimbi Gb ingenamthungo

OEM/ODM China Pressure Boiler Cylinder Oyile Ulwakhiwo lwegesi Ingxubevange yeGb imibhobho yentsimbi engenamthungo eFakelwe umfanekiso
  • OEM/ODM China Pressure Boiler Cylinder Oyile Ulwakhiwo lwegesi Ingxubevange yemibhobho yentsimbi Gb ingenamthungo
  • OEM/ODM China Pressure Boiler Cylinder Oyile Ulwakhiwo lwegesi Ingxubevange yemibhobho yentsimbi Gb ingenamthungo
  • OEM/ODM China Pressure Boiler Cylinder Oyile Ulwakhiwo lwegesi Ingxubevange yemibhobho yentsimbi Gb ingenamthungo

Inkcazelo emfutshane:

Umgangatho ophezulu we-carbon structural steel, i-alloy structural iron, kunye nentsimbi yensimbi engenasici ekwazi ukumelana nobushushu, umbhobho wensimbi ongenamthungo woxinzelelo oluphezulu nangaphezulu kwemibhobho yebhoyila yomphunga kwi-GB/T5310-2007 standard. Izinto eziphathekayo ikakhulu yi-Cr-Mo alloy kunye ne-Mn Alloy, njenge-20G, i-20MnG, i-20MoG, i-12CrMoG, njl.


  • Intlawulo:30% idiphozithi, 70% L/C okanye B/L ikopi okanye 100% L/C emehlweni
  • Min.Ubungakanani boMyalelo:I-PC eyi-1
  • Ukubonelela ngezakhono:Ngonyaka 20000 Tons Inventory of Steel Pipe
  • Ixesha lokukhokhela:7-14 iintsuku ukuba isitokhwe, 30-45 iintsuku ukuvelisa
  • Ukupakisha:Ukunyamalala okumnyama, i-bevel kunye ne-cap yombhobho ngamnye; I-OD engaphantsi kwe-219mm kufuneka ipakishwe kwi-bundle, kwaye ibhandle nganye ayidluli kwiitoni ezi-2.
    • Khuphela njengePDF

    Iinkcukacha zeMveliso

    Iithegi zeMveliso

    Ikhomishini yethu kufuneka ibe kukubonelela abathengi bethu kunye nabathengi ngomgangatho ophezulu ofanelekileyo kunye neemveliso eziphathwayo eziphathwayo ze-OEM/ODM yaseTshayina Uxinzelelo lweBoiler Cylinder Oli yegesi.I-Structure Alloy Gb Seamless Steel Pipes, Ixabiso elinobundlongondlongo elinomgangatho ophezulu kunye nenkxaso eyanelisayo yenza ukuba sizuze abathengi abongezelelweyo.sinqwenela ukusebenza kunye nawe kwaye sicele ukuphuculwa okuqhelekileyo.
    IKomishini yethu kufuneka ibe kukubonelela abathengi kunye nabathengi bethu ngomgangatho ofanelekileyo kunye neemveliso eziphathwayo zedijithaliUxinzelelo lweBoiler Cylinder Oil Gas Seamless Steel Pipes, Imibhobho yentsimbi engenamthungo, I-Structure Alloy Gb Seamless Steel Pipes, Ii-odolo zeSiko zamkelekile ngebakala elahlukileyo lomgangatho kunye noyilo olukhethekileyo lomthengi. Sijonge phambili ekusekeni intsebenziswano elungileyo nenempumelelo kwishishini kunye namaxesha amade ukusuka kubathengi behlabathi liphela.

    Isishwankathelo

    Isicelo

    Isetyenziswa ikakhulu ukwenza umgangatho ophezulu wekhabhoni yentsimbi, intsimbi yesakhiwo sealloyi kunye nentsimbi engatyiwa ngumthungo yemibhobho yentsimbi engenamthungo yoxinzelelo oluphezulu nangaphezulu kwemibhobho yebhoyila yomphunga.

    Isetyenziswa ikakhulu kuxinzelelo oluphezulu kunye nenkonzo yobushushu obuphezulu bebhoyila (ityhubhu yeheater, ityhubhu yokufudumeza, ityhubhu yesikhokelo somoya, ityhubhu ephambili yomphunga kwizibiyeli zoxinzelelo oluphezulu kunye noxinzelelo oluphezulu). Ngaphantsi kwesenzo segesi ephezulu yokushisa kunye nomphunga wamanzi, ityhubhu iya ku-oxidize kwaye idle. Kuyadingeka ukuba umbhobho wensimbi unokuqina okuphezulu, ukuchasana okuphezulu kwi-oxidation kunye nokugqwala, kunye nokuzinza okuhle kwesakhiwo.

    IBanga eliPhambili

    IBanga le-carbon high-quality steel structure: 20g, 20mng, 25mng

    IBanga le-alloy yensimbi yesakhiwo: 15mog, 20mog, 12crmog, 15crmog, 12cr2mog, 12crmovg, 12cr3movsitib, njl.

    Ibakala lentsimbi ekwaziyo ukumelana nobushushu: 1cr18ni9 1cr18ni11nb

    ICandelo leMichiza

    IBanga

    Umgangatho

    Iklasi

    Ipropati yeMichiza

    C

    Si

    Mn

    P

    S

    Nb

    V

    Ti

    Cr

    Ni

    Cu

    Nd

    Mo

    B

    Als”

    不大于

    不小于
    Q345 A

    0.20

    0.50

    1.70

    		 0.035 0.035

    0.30

    0.50

    0.20

    0.012

    0.10

    		 - -
    B 0.035 0.035
    C 0.030 0.030

    0.07

    0.15

    0.20

    0.015
    D

    0.18

    		 0.030 0.025
    E 0.025 0.020
    Q390 A

    0.20

    0.50

    1.70

    		 0.035 0.035

    0.07

    0.20

    0.20

    0.3

    0.50

    0.20

    0.015

    0.10

    		 - -
    B 0.035 0.035
    C 0.030 0.030

    0,015
    D 0.030 0.025
    E 0.025 0.020
    Q42O A

    0.20

    0.50

    1.70

    		 0.035 0.035

    0.07

    0.2

    0.20

    0.30

    0.80

    0.20

    0.015

    0.20

    		 -

    -
    B 0.035 0.035
    C 0.030 0.030

    0.015
    D 0.030 0.025
    E 0.025 0.020
    Q46O C

    0.20

    0.60

    1.80

    		 0.030 0.030

    0.11

    0.20

    0.20

    0.30

    0.80

    0.20

    0.015

    0.20

    0.005

    0.015
    D 0.030 0.025
    E 0.025 0.020
    Q500 C

    0.18

    0.60

    1.80

    		 0.025 0.020

    0.11

    0.20

    0.20

    0.60

    0.80

    0.20

    0.015

    0.20

    0.005

    0.015
    D 0.025 0.015
    E 0.020 0.010
    Q550 C

    0.18

    0.60

    2.00

    		 0.025 0,020 0.11

    0.20

    0.20

    0.80

    0.80

    0.20

    0.015

    0.30

    0.005

    0.015
    D 0.025 0,015
    E 0.020 0.010
    Q62O C

    0.18

    0.60

    2.00

    		 0.025 0.020

    0.11

    0.20

    0.20

    1.00

    0.80

    0.20

    0.015

    0.30

    0.005

    0.015
    D 0.025 0.015
    E 0.020 0.010
    Ngaphandle kwamabakala e-Q345A kunye ne-Q345B, intsimbi kufuneka iqulethe ubuncinane enye yezinto eziziinkozo ezicocekileyo i-Al, Nb, V, kunye ne-Ti. Ngokweemfuno, umthengisi unokongeza enye okanye ngaphezulu kwezinto eziziinkozo eziphuculweyo, ixabiso eliphezulu Kufuneka lihlangabezane neemfuno kwitheyibhile. Xa zidityanisiwe, Nb + V + Ti <0.22% °Kumabanga e-Q345, Q390, Q420 kunye ne-Q46O, Mo + Cr <0.30% oXa ibakala ngalinye le-Cr kunye ne-Ni lisetyenziswa njengento eshiyekileyo, umxholo we-Cr no-Ni akufanelekanga ibe ngaphezu kwe-0.30%; xa kufuneka ifakwe, umxholo wayo kufuneka uhlangabezane neemfuno kwitheyibhile okanye unqunywe ngumthengisi kunye nomthengi ngokubonisana.

    J Ukuba umthengisi unokuqinisekisa ukuba umxholo we-nitrogen uhlangabezana neemfuno kwitheyibhile, uhlalutyo lomxholo we-nitrogen alunakwenziwa. Ukuba i-Al, i-Nb, i-V, i-Ti kunye nezinye izinto ze-alloy kunye nokulungiswa kwe-nitrogen zongezwa kwintsimbi, umxholo we-nitrogen awukhawulelwanga. Umxholo wokulungiswa kwenitrogen kufuneka ucaciswe kwisiqinisekiso somgangatho.

    'Xa usebenzisa yonke i-aluminiyam, umxholo we-aluminiyam iyonke AIt ^ 0.020% B

    IPropati yoomatshini

    No

    IBanga

    IPropati yoomatshini

     

     

    Ukuqina
    MPa

    Yima kancinci
    MPa

    Yandisa
    L/T

    Impembelelo (J)
    Ngokuthe nkqo/ Ukuthe tye

    Isandla
    HB

    1

    20G

    410-
    550

    ≥
    245

    24/22%

    40/27

    -

    2

    20MnG

    415-
    560

    ≥
    240

    22/20%

    40/27

    -

    3

    25MnG

    485-
    640

    ≥
    275

    20/18%

    40/27

    -

    4

    15MoG

    450-
    600

    ≥
    270

    22/20%

    40/27

    -

    6

    12CrMoG

    410-
    560

    ≥
    205

    21/19%

    40/27

    -

    7

    15CrMoG

    440-
    640

    ≥
    295

    21/19%

    40/27

    -

    8

    12Cr2MoG

    450-
    600

    ≥
    280

    22/20%

    40/27

    -

    9

    12Cr1MoVG

    470-
    640

    ≥
    255

    21/19%

    40/27

    -

    10

    12Cr2MoWVTiB

    540-
    735

    ≥
    345

    18/-%

    40/-

    -

    11

    10Cr9Mo1VNbN

    ≥
    585

    ≥
    415

    20/16%

    40/27

    ≤
    250

    12

    10Cr9MoW2VNbBN

    ≥
    620

    ≥
    440

    20/16%

    40/27

    ≤
    250

    Ukunyamezelana

    Ukutyeba kweendonga kunye neDayimitha yaNgaphandle:

    Ukuba akukho mfuneko zikhethekileyo, umbhobho uya kuhanjiswa njengedayamitha yangaphandle eqhelekileyo kunye nobukhulu bodonga oluqhelekileyo. Njengephepha elilandelayo

    Ukutyunjwa kokuhlelwa

    Indlela yokwenziwa

    Ubungakanani bombhobho

    Ukunyamezelana

    Ibanga eliqhelekileyo

    Ibanga eliphezulu

    WH

    Umbhobho oshushu (extrude)

    Idayamitha yangaphandle eqhelekileyo

    (D)

    <57

    Umhla 0.40

    ±0,30

    57 〜325

    SW35

    ±0.75%D

    ±0.5%D

    S>35

    ±1%D

    ±0.75%D

    >325 ukuya ku6.

    + 1%D okanye + 5.Thatha enye encinane一2

    > 600

    + 1%D okanye + 7,Thatha engaphantsi kwe2

    Ukutyeba kodonga oluqhelekileyo

    (S)

    <4.0

    ±|・丨）

    ±0.35

    >4.0-20

    + 12,5%S

    ±10%S

    >20

    DV219

    ±10%S

    ±7.5%S

    心219

    + 12.5%S -10%S

    土10%S

    WH

    Umbhobho wokwandisa i-Thermal

    		 Idayamitha yangaphandle eqhelekileyo

    (D)

    zonke

    ±1%D

    ±0.75%.
    Ukutyeba kodonga oluqhelekileyo

    (S)

    zonke

    + 20%S

    -10%S

    + 15%S

    -io%s

    i-WC

    Kuyabanda (kuqengqiwe)

    Umbhobho

    		 Idayamitha yangaphandle eqhelekileyo

    (D)

    <25.4

    ±'L1j

    -

    >25.4 〜4()

    ±0.20

    > 40 〜50

    |:0.25

    -

    >50〜60

    ±0.30

    >60

    ±0.5%D

    Ukutyeba kodonga oluqhelekileyo

    (S)

    <3.0

    ±0.3

    ±0.2

    >3.0

    S

    ±7.5%S

    Ubude:

    Ubude obuqhelekileyo bemibhobho yentsimbi yi-4 000 mm ~ 12 000 mm. Emva kokubonisana phakathi komthengisi kunye nomthengi, kwaye ugcwalise isivumelwano, inokuhanjiswa imibhobho yentsimbi kunye nobude obungaphezu kwe-12 000 mm okanye mfutshane kune-I 000 mm kodwa ingabi mfutshane kune-3 000 mm; ubude obufutshane Inani lemibhobho yentsimbi engaphantsi kwe-4,000 mm kodwa ingabi ngaphantsi kwe-3,000 mm ayisayi kudlula i-5% yenani lilonke lemibhobho yentsimbi ehanjiswayo.

    Ubunzima bokuhanjiswa:
    Xa umbhobho wensimbi uhanjiswa ngokomlinganiselo wangaphandle wegama kunye nobukhulu bodonga olubizwa ngokuba yi-nominal yangaphakathi kunye nobukhulu bodonga, umbhobho wensimbi uhanjiswa ngokobunzima bangempela. Isenokuhanjiswa ngokobunzima bethiyori.
    Xa umbhobho wensimbi uhanjiswa ngokomlinganiselo wangaphandle wegama kunye nobukhulu obuncinci bodonga, umbhobho wensimbi uhanjiswa ngokwesisindo sangempela; amaqela obonelelo kunye nebango ayathethathethana. Kwaye kubonisiwe kwikhontrakthi. Umbhobho wensimbi unokuhanjiswa ngokobunzima bethiyori.

    Ukunyamezela ubunzima:
    Ngokweemfuno zomthengi, emva kokubonisana phakathi komthengisi kunye nomthengi, kunye nekhontrakthi, ukutenxa phakathi kobunzima bokwenene kunye nobunzima bethiyori yombhobho wentsimbi yokuhanjiswa kuya kuhlangabezana nezi mfuno zilandelayo:
    a) Umbhobho wentsimbi enye: ± 10%;
    b) Ibhetshi nganye yemibhobho yentsimbi enobungakanani obuncinane be-10 t: ± 7.5%.

    Imfuneko yoVavanyo

    Uvavanyo lweHydraustatic:

    Umbhobho wentsimbi kufuneka uvavanywe nge-hydraulically nganye nganye. Uxinzelelo oluphezulu lovavanyo luyi-20 MPa. Ngaphantsi koxinzelelo lovavanyo, ixesha lokuzinzisa kufuneka lingabi ngaphantsi kwe-10 s, kwaye umbhobho wensimbi akufanele uvuze.

    Emva kokuba umsebenzisi evumile, uvavanyo lwe-hydraulic lunokutshintshwa ngovavanyo lwangoku lwe-eddy okanye uvavanyo lokuvuza kwemagnethi.

    Uvavanyo olungonakaliyo:

    Imibhobho efuna ukuhlolwa okungakumbi kufuneka ihlolwe nge-ultrasonically nganye. Emva kokuba uthethathethwano lufuna imvume yeqela kwaye luchazwe kwikhontrakthi, olunye uvavanyo olungonakalisi lungongezwa.

    Uvavanyo lokucaba:

    Iityhubhu ezinobukhulu obungaphandle obungaphezulu kwe-22 mm ziya kufakwa kuvavanyo lokucaba. Akukho delamination ebonakalayo, amabala amhlophe, okanye ukungcola kufuneka kwenzeke ngexesha lonke uvavanyo.

    Uvavanyo lokuvutha:

    Ngokweemfuno zomthengi kwaye zichazwe kwikhontrakthi, umbhobho wensimbi kunye nobubanzi obungaphandle ≤76mm kunye nobukhulu bodonga ≤8mm lunokwenziwa uvavanyo lokuvutha . Uvavanyo lwenziwa kwiqondo lobushushu begumbi kunye ne-taper ye-60 °. Emva kokuvutha, isantya sokuvutha kobubanzi bangaphandle kufuneka sihlangabezane neemfuno zetafile elandelayo, kwaye izinto zokuvavanya akufanele zibonise ukuqhekeka okanye ukukrazula.

    Uhlobo lwentsimbi

     

     

    Umyinge wokuvutha wedayamitha yangaphandle yombhobho wentsimbi/%

    I-Diameter yangaphakathi / i-Outer Diameter

    <0.6

    >0.6 〜0.8

    >0.8

    Umgangatho ophezulu we-carbon structural steel

    10

    12

    17

    Intsimbi ye-alloy yesakhiwo

    8

    10

    15
    •Idayimitha yangaphakathi ibalwa kwisampulu.

    Iinkcukacha zeMveliso

    Imibhobho yentsimbi engenamthungo yeeBoiler zoxinzelelo oluphezulu


    GB/T5310-2017


    ASME SA-106/SA-106M-2015


    I-ASTMA210(A210M)-2012


    ASME SA-213/SA-213M


    I-ASTM A335/A335M-2018

  • Ngaphambili:
  • Okulandelayo:
    • Bhala umyalezo wakho apha kwaye uwuthumele kuthi
    Cofa u-enter ukukhangela okanye i-ESC ukuvala