Umthungo webhoyila yentsimbi yekhabhoni engenamthungo kunye neetyhubhu zeSuperheat ASTM A210 umgangatho

Inkcazelo emfutshane:

SA210UmGangatho wokuPhunyezwa kombhobho we-Alloy we-High PressureI-ASTM A210—– ASME SA210- Umbutho waseMelika woMgangatho weeNjineli zoomatshini.

Ifanelekile ukuSetyenziswa kwiBhoyibhobho yeBoiler kunye noMbhobho weFlue, equka isiphelo soKhuseleko, iVault kunye neNkxaso yombhobho weheater kunye nombhobho weheater oneSuperhiatre enobuncinane boBungqimba boDonga obungenamthungo obuPhakathi boMbhobho wentsimbi yeCarbon.

Imveliso ephambili yoMbhobho we-High Pressure Alloy Pipe: A210A1, A210C kunye nokunye.


  • Intlawulo:30% idiphozithi, 70% L/C okanye B/L ikopi okanye 100% L/C emehlweni
  • Min.Ubungakanani boMyalelo:20T
  • Ukubonelela ngezakhono:Ngonyaka 20000 Tons Inventory of Steel Pipe
  • Ixesha lokukhokhela:7-14 iintsuku ukuba isitokhwe, 30-45 iintsuku ukuvelisa
  • Ukupakisha:Ukunyamalala okumnyama, i-bevel kunye ne-cap yombhobho ngamnye; I-OD engaphantsi kwe-219mm kufuneka ipakishwe kwi-bundle, kwaye ibhandle nganye ayidluli kwiitoni ezi-2.
  • Iinkcukacha zeMveliso

    Iithegi zeMveliso

    Isishwankathelo

    Umgangatho: ASTM SA210 Ingxubevange Okanye Hayi: Carbon steel
    IQela leBanga: Gra. GrC Isicelo: Umbhobho weBoiler
    Ukutyeba: 1 - 100 mm Unyango loMphezulu: Njengemfuno yomthengi
    I-Diameter yangaphandle (Round): 10 - 1000 mm Ubuchwephesha: Isolwe ngokushushu/Ebandayo
    Ubude: Ubude obuzinzileyo okanye ubude obungenamkhethe Unyango lobushushu: Ukuphelisa/ukwenza oko kuqhelekileyo
    Ubume beCandelo: Round Umbhobho oKhethekileyo: Umbhobho oshinyeneyo wodonga
    Indawo yemvelaphi: eTshayina Ukusetyenziswa: I-Boiler kunye ne-Heat Exchanger
    Isiqinisekiso: ISO9001:2008 Uvavanyo: ET/UT

     

    Isicelo

    Isetyenziselwa ikakhulu ukwenza intsimbi yekhabhoni engenamthungo ekumgangatho ophezulu, imibhobho yebhoyila, imibhobho yobushushu obukhulu

    kushishino lwe-bolier, umbhobho wokutshintsha ubushushu njl

    IBanga eliPhambili

    IBanga lentsimbi yebhoyila yekhabhoni ekumgangatho ophezulu: GrA, GrC

    ICandelo leMichiza

    Isiqalelo IBanga A IBanga C
    C ≤0.27 ≤0.35
    Mn ≤0.93 0.29-1.06
    P ≤0.035 ≤0.035
    S ≤0.035 ≤0.035
    Si ≥ 0.1 ≥ 0.1

    A Ngokucuthwa ngakunye nge-0.01 % ngaphantsi kobuninzi bekhabhoni echaziweyo, ukonyuka kwe-0.06 % yemanganese ngaphezu kowona mlinganiselo uphezulu uchaziweyo kuya kuvunyelwa ukuya kuthi ga kwi-1.35 %.

    IPropati yoomatshini

      IBanga A IBanga C
    Tensile strength ≥ 415 ≥ 485
    Unikeze Amandla ≥ 255 ≥ 275
    Izinga lokwandisa ≥ 30 ≥ 30

     

    Imfuneko yoVavanyo

    Uvavanyo lweHydraustatic:

    Umbhobho weNtsimbi kufuneka uVavanywe ngokweHydraulically enye nenye. Uxinzelelo oluphezulu lovavanyo luyi-20 MPa. Ngaphantsi koxinzelelo lovavanyo, ixesha lokuzinzisa kufuneka lingabi ngaphantsi kwe-10 S, kwaye iPipe yensimbi akufanele ivuze.

    Emva kokuba uMsebenzisi eVumelana, uvavanyo lweHydraulic lunokutshintshwa luVavanyo lwangoku lwe-Eddy okanye uvavanyo lokuvuza kweMagnetic Flux.

    Uvavanyo lokucaba:

    Iityhubhu ezinoMda waNgaphandle oMkhulu kune-22 mm ziyakuBekelwa kuVavanyo lokuNcandwa. Akukho Kulahlwa okubonakalayo, amabala amhlophe, okanye ubumdaka obunokuthi kwenzeke ngexesha lovavanyo lulonke.

    Uvavanyo lokuvutha:

    NgokweeMfuno zoMthengi kwaye zichazwe kwikhontrakthi, uMbhobho weSsimbi onoDayamitha waNgaphandle ≤76mm kunye noBungqingqwa beDonga ≤8mm Unokwenziwa Uvavanyo Lokuvutha . Uvavanyo lwenziwa kwiqondo lobushushu leGumbi ngeTaper ye60 °. Emva kokugqabhuka, inqanaba lokuvutha koMda weDayimitha yaNgaphandle kufuneka lihlangabezane neemfuno zeTheyibhile ilandelayo, kwaye izinto zovavanyo akufuneki zibonise iintanda okanye ukukrazula.

    Uvavanyo lokuqina:

    Uvavanyo lobulukhuni beBrinell okanye iRockwell luya kwenziwa kwisampulu ezisuka kwityhubhu ezimbini kwiqashiso ngalinye

    Iinkcukacha zeMveliso


  • Ngaphambili:
  • Okulandelayo:

  • Bhala umyalezo wakho apha kwaye uwuthumele kuthi